mx6: Add solo-lite variant support
mx6 solo-lite is another member of the mx6 series.
For more information about mx6 solo-lite, please visit:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6SL&nodeId=018rH3ZrDRB24A
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index a50db70..8cba4fd 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -186,12 +186,16 @@
static u32 get_uart_clk(void)
{
u32 reg, uart_podf;
-
+ u32 freq = PLL3_80M;
reg = __raw_readl(&imx_ccm->cscdr1);
+#ifdef CONFIG_MX6SL
+ if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
+ freq = MXC_HCLK;
+#endif
reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
- return PLL3_80M / (uart_podf + 1);
+ return freq / (uart_podf + 1);
}
static u32 get_cspi_clk(void)
@@ -252,6 +256,35 @@
return root_freq / (emi_slow_pof + 1);
}
+#ifdef CONFIG_MX6SL
+static u32 get_mmdc_ch0_clk(void)
+{
+ u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
+ u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
+ u32 freq, podf;
+
+ podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \
+ >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
+
+ switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
+ MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
+ case 0:
+ freq = decode_pll(PLL_BUS, MXC_HCLK);
+ break;
+ case 1:
+ freq = PLL2_PFD2_FREQ;
+ break;
+ case 2:
+ freq = PLL2_PFD0_FREQ;
+ break;
+ case 3:
+ freq = PLL2_PFD2_DIV_FREQ;
+ }
+
+ return freq / (podf + 1);
+
+}
+#else
static u32 get_mmdc_ch0_clk(void)
{
u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
@@ -260,6 +293,7 @@
return get_periph_clk() / (mmdc_ch0_podf + 1);
}
+#endif
static u32 get_usdhc_clk(u32 port)
{
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 7676457..b1ed62f 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -244,7 +244,12 @@
#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
+#ifdef CONFIG_MX6SL
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F
+#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
+#else
#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F
+#endif
#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
/* Define the bits in register CS1CDR */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index d79ab2f..09be974 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -25,6 +25,13 @@
#define ROMCP_ARB_BASE_ADDR 0x00000000
#define ROMCP_ARB_END_ADDR 0x000FFFFF
+
+#ifdef CONFIG_MX6SL
+#define GPU_2D_ARB_BASE_ADDR 0x02200000
+#define GPU_2D_ARB_END_ADDR 0x02203FFF
+#define OPENVG_ARB_BASE_ADDR 0x02204000
+#define OPENVG_ARB_END_ADDR 0x02207FFF
+#else
#define CAAM_ARB_BASE_ADDR 0x00100000
#define CAAM_ARB_END_ADDR 0x00103FFF
#define APBH_DMA_ARB_BASE_ADDR 0x00110000
@@ -37,9 +44,14 @@
#define GPU_2D_ARB_END_ADDR 0x00137FFF
#define DTCP_ARB_BASE_ADDR 0x00138000
#define DTCP_ARB_END_ADDR 0x0013BFFF
-
+#endif /* CONFIG_MX6SL */
/* GPV - PL301 configuration ports */
+#ifdef CONFIG_MX6SL
+#define GPV2_BASE_ADDR 0x00D00000
+#else
#define GPV2_BASE_ADDR 0x00200000
+#endif
+
#define GPV3_BASE_ADDR 0x00300000
#define GPV4_BASE_ADDR 0x00800000
#define IRAM_BASE_ADDR 0x00900000
@@ -70,10 +82,17 @@
#define WEIM_ARB_BASE_ADDR 0x08000000
#define WEIM_ARB_END_ADDR 0x0FFFFFFF
+#ifdef CONFIG_MX6SL
+#define MMDC0_ARB_BASE_ADDR 0x80000000
+#define MMDC0_ARB_END_ADDR 0xFFFFFFFF
+#define MMDC1_ARB_BASE_ADDR 0xC0000000
+#define MMDC1_ARB_END_ADDR 0xFFFFFFFF
+#else
#define MMDC0_ARB_BASE_ADDR 0x10000000
#define MMDC0_ARB_END_ADDR 0x7FFFFFFF
#define MMDC1_ARB_BASE_ADDR 0x80000000
#define MMDC1_ARB_END_ADDR 0xFFFFFFFF
+#endif
#define IPU_SOC_BASE_ADDR IPU1_ARB_BASE_ADDR
#define IPU_SOC_OFFSET 0x00200000
@@ -89,6 +108,16 @@
#define ECSPI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x0C000)
#define ECSPI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x10000)
#define ECSPI4_BASE_ADDR (ATZ1_BASE_ADDR + 0x14000)
+#ifdef CONFIG_MX6SL
+#define UART5_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000)
+#define UART2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define SSI1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000)
+#define SSI2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
+#define SSI3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
+#define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000)
+#else
#define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
#define UART1_BASE (ATZ1_BASE_ADDR + 0x20000)
#define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
@@ -96,6 +125,8 @@
#define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
#define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
#define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#endif
+
#define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000)
#define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000)
#define AIPS1_ON_BASE_ADDR (ATZ1_BASE_ADDR + 0x7C000)
@@ -128,18 +159,35 @@
#define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x58000)
#define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000)
#define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000)
+#ifdef CONFIG_MX6SL
+#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
+#define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#else
#define DCIC1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
#define DCIC2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
#define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#endif
#define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000)
#define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000)
#define CAAM_BASE_ADDR (ATZ2_BASE_ADDR)
#define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000)
+#ifdef CONFIG_MX6SL
+#define USBO2H_PL301_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
+#define USBO2H_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
+#else
#define USBOH3_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
#define USBOH3_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
+#endif
+
#define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000)
+#ifdef CONFIG_MX6SL
+#define MSHC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000)
+#else
#define MLB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000)
+#endif
+
#define USDHC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x10000)
#define USDHC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x14000)
#define USDHC3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x18000)
@@ -149,7 +197,12 @@
#define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000)
#define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000)
#define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000)
+#ifdef CONFIG_MX6SL
+#define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+#else
#define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+#endif
+
#define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000)
#define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000)
#define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000)
@@ -365,12 +418,20 @@
#define MXC_CSPICON_POL 4
#define MXC_CSPICON_PHA 0
#define MXC_CSPICON_SSPOL 12
+#ifdef CONFIG_MX6SL
+#define MXC_SPI_BASE_ADDRESSES \
+ ECSPI1_BASE_ADDR, \
+ ECSPI2_BASE_ADDR, \
+ ECSPI3_BASE_ADDR, \
+ ECSPI4_BASE_ADDR
+#else
#define MXC_SPI_BASE_ADDRESSES \
ECSPI1_BASE_ADDR, \
ECSPI2_BASE_ADDR, \
ECSPI3_BASE_ADDR, \
ECSPI4_BASE_ADDR, \
ECSPI5_BASE_ADDR
+#endif
struct iim_regs {
u32 ctrl;
diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h
index 63f4856..ce865a6 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h
@@ -24,7 +24,11 @@
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
#include "mx6dl_pins.h"
#else
+#if defined(CONFIG_MX6SL)
+#include "mx6sl_pins.h"
+#else
#error "Please select cpu"
+#endif /* CONFIG_MX6SL */
#endif /* CONFIG_MX6DL or CONFIG_MX6S */
#endif /* CONFIG_MX6Q */
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
new file mode 100644
index 0000000..3c0ede0
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MX6_MX6SL_PINS_H__
+#define __ASM_ARCH_MX6_MX6SL_PINS_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+enum {
+ MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x055C, 0x0254, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0560, 0x0258, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0564, 0x025C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0568, 0x0260, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x056C, 0x0264, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0),
+ MX6_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0),
+ MX6_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0),
+};
+#endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */