blob: cf540fc6518df7324fba3273e866d231806f1b99 [file] [log] [blame]
/*
* Copyright 2006, 2007 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_86xx.h>
#include <asm/immap_fsl_pci.h>
#include <spd_sdram.h>
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
#include "../common/pixis.h"
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
void sdram_init(void);
long int fixed_sdram(void);
int board_early_init_f(void)
{
return 0;
}
int checkboard(void)
{
puts("Board: MPC8641HPCN\n");
return 0;
}
phys_size_t
initdram(int board_type)
{
long dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
dram_size = spd_sdram();
#else
dram_size = fixed_sdram();
#endif
#if defined(CFG_RAMBOOT)
puts(" DDR: ");
return dram_size;
#endif
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
ddr_enable_ecc(dram_size);
#endif
puts(" DDR: ");
return dram_size;
}
#if !defined(CONFIG_SPD_EEPROM)
/*
* Fixed sdram init -- doesn't use serial presence detect.
*/
long int
fixed_sdram(void)
{
#if !defined(CFG_RAMBOOT)
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
ddr->sdram_mode_1 = CFG_DDR_MODE_1;
ddr->sdram_mode_2 = CFG_DDR_MODE_2;
ddr->sdram_interval = CFG_DDR_INTERVAL;
ddr->sdram_data_init = CFG_DDR_DATA_INIT;
ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
#if defined (CONFIG_DDR_ECC)
ddr->err_disable = 0x0000008D;
ddr->err_sbe = 0x00ff0000;
#endif
asm("sync;isync");
udelay(500);
#if defined (CONFIG_DDR_ECC)
/* Enable ECC checking */
ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
#else
ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
#endif
asm("sync; isync");
udelay(500);
#endif
return CFG_SDRAM_SIZE * 1024 * 1024;
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
#if defined(CONFIG_PCI)
/*
* Initialize PCI Devices, report devices found.
*/
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_fsl86xxads_config_table[] = {
{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_IDSEL_NUMBER, PCI_ANY_ID,
pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
{}
};
#endif
static struct pci_controller pci1_hose = {
#ifndef CONFIG_PCI_PNP
config_table:pci_mpc86xxcts_config_table
#endif
};
#endif /* CONFIG_PCI */
#ifdef CONFIG_PCI2
static struct pci_controller pci2_hose;
#endif /* CONFIG_PCI2 */
int first_free_busno = 0;
void pci_init_board(void)
{
volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
#ifdef CONFIG_PCI1
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pci1_hose;
#ifdef DEBUG
uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
>> MPC8641_PORBMSR_HA_SHIFT;
uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
#endif
if ((io_sel == 2 || io_sel == 3 || io_sel == 5
|| io_sel == 6 || io_sel == 7 || io_sel == 0xF)
&& !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
debug(" with errors. Clearing. Now 0x%08x",
pci->pme_msg_det);
}
debug("\n");
/* inbound */
pci_set_region(hose->regions + 0,
CFG_PCI_MEMORY_BUS,
CFG_PCI_MEMORY_PHYS,
CFG_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region(hose->regions + 1,
CFG_PCI1_MEM_BASE,
CFG_PCI1_MEM_PHYS,
CFG_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(hose->regions + 2,
CFG_PCI1_IO_BASE,
CFG_PCI1_IO_PHYS,
CFG_PCI1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
fsl_pci_init(hose);
first_free_busno=hose->last_busno+1;
printf (" PCI-EXPRESS 1 on bus %02x - %02x\n",
hose->first_busno,hose->last_busno);
/*
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
*/
in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE
+ CFG_PCI1_MEM_SIZE - 0x1000000)));
} else {
puts("PCI-EXPRESS 1: Disabled\n");
}
}
#else
puts("PCI-EXPRESS1: Disabled\n");
#endif /* CONFIG_PCI1 */
#ifdef CONFIG_PCI2
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pci2_hose;
/* inbound */
pci_set_region(hose->regions + 0,
CFG_PCI_MEMORY_BUS,
CFG_PCI_MEMORY_PHYS,
CFG_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region(hose->regions + 1,
CFG_PCI2_MEM_BASE,
CFG_PCI2_MEM_PHYS,
CFG_PCI2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(hose->regions + 2,
CFG_PCI2_IO_BASE,
CFG_PCI2_IO_PHYS,
CFG_PCI2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
fsl_pci_init(hose);
first_free_busno=hose->last_busno+1;
printf (" PCI-EXPRESS 2 on bus %02x - %02x\n",
hose->first_busno,hose->last_busno);
}
#else
puts("PCI-EXPRESS 2: Disabled\n");
#endif /* CONFIG_PCI2 */
}
#if defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
int node, tmp[2];
const char *path;
ft_cpu_setup(blob, bd);
node = fdt_path_offset(blob, "/aliases");
tmp[0] = 0;
if (node >= 0) {
#ifdef CONFIG_PCI1
path = fdt_getprop(blob, node, "pci0", NULL);
if (path) {
tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
}
#endif
#ifdef CONFIG_PCI2
path = fdt_getprop(blob, node, "pci1", NULL);
if (path) {
tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
}
#endif
}
}
#endif
/*
* get_board_sys_clk
* Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
*/
unsigned long
get_board_sys_clk(ulong dummy)
{
u8 i, go_bit, rd_clks;
ulong val = 0;
go_bit = in8(PIXIS_BASE + PIXIS_VCTL);
go_bit &= 0x01;
rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0);
rd_clks &= 0x1C;
/*
* Only if both go bit and the SCLK bit in VCFGEN0 are set
* should we be using the AUX register. Remember, we also set the
* GO bit to boot from the alternate bank on the on-board flash
*/
if (go_bit) {
if (rd_clks == 0x1c)
i = in8(PIXIS_BASE + PIXIS_AUX);
else
i = in8(PIXIS_BASE + PIXIS_SPD);
} else {
i = in8(PIXIS_BASE + PIXIS_SPD);
}
i &= 0x07;
switch (i) {
case 0:
val = 33000000;
break;
case 1:
val = 40000000;
break;
case 2:
val = 50000000;
break;
case 3:
val = 66000000;
break;
case 4:
val = 83000000;
break;
case 5:
val = 100000000;
break;
case 6:
val = 134000000;
break;
case 7:
val = 166000000;
break;
}
return val;
}