sunxi: boards: Enable SPI flash support in U-Boot proper
Some sunxi boards ship with SPI flash, which allows booting through the
BootROM. We cover this functionality by a separate SPL "mini" driver.
Separately we have a proper DM_SPI driver for U-Boot proper, which
provides access to the SPI flash through the "sf" command. That allows
to update the firmware on the SPI flash, also to store the environment
there.
However only very few boards actually enable support for U-Boot proper,
even though that would work and the SPL part is configured.
Use the cleaned up configuration scheme to enable SPI flash on those
boards which mention a SPI flash in their .dts, or which use the SPL SPI
support.
Out of the box this would enable storing the environment on the SPI
flash, and allows people to read or write the flash from U-Boot, for
instance to update the SPI flash when booted via an SD card.
For this to actually work there must be a "spi0" alias in the DT, which
most boards are missing. But this should be addressed separately.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
index 2eaddcf..777af8c 100644
--- a/configs/orangepi_pc2_defconfig
+++ b/configs/orangepi_pc2_defconfig
@@ -11,9 +11,11 @@
CONFIG_SPL_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_SY8106A_VOUT1_VOLT=1100
+CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig
index 745451c..4496aa4 100644
--- a/configs/orangepi_r1_defconfig
+++ b/configs/orangepi_r1_defconfig
@@ -8,6 +8,8 @@
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
+CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig
index 1337552..3b78ad7 100644
--- a/configs/orangepi_win_defconfig
+++ b/configs/orangepi_win_defconfig
@@ -7,6 +7,7 @@
CONFIG_MACPWR="PD14"
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y
diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig
index 22563c8..54faf6a 100644
--- a/configs/orangepi_zero2_defconfig
+++ b/configs/orangepi_zero2_defconfig
@@ -15,5 +15,7 @@
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
+CONFIG_SPI=y
diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig
index 332cd47..2dc69d2 100644
--- a/configs/orangepi_zero_defconfig
+++ b/configs/orangepi_zero_defconfig
@@ -8,6 +8,8 @@
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
+CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/pine64-lts_defconfig b/configs/pine64-lts_defconfig
index 75a77ac..45a9e77 100644
--- a/configs/pine64-lts_defconfig
+++ b/configs/pine64-lts_defconfig
@@ -10,6 +10,7 @@
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_SPI=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig
index 1928509..1e730dd 100644
--- a/configs/pine_h64_defconfig
+++ b/configs/pine_h64_defconfig
@@ -11,8 +11,10 @@
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_PHY_SUN50I_USB3=y
+CONFIG_SPI=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
index 0c71d59..e779663 100644
--- a/configs/pinecube_defconfig
+++ b/configs/pinecube_defconfig
@@ -12,8 +12,10 @@
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_NETDEVICES is not set
CONFIG_AXP209_POWER=y
CONFIG_AXP_DCDC2_VOLT=1250
CONFIG_AXP_DCDC3_VOLT=3300
CONFIG_CONS_INDEX=3
+CONFIG_SPI=y