sunxi: boards: Enable SPI flash support in U-Boot proper

Some sunxi boards ship with SPI flash, which allows booting through the
BootROM. We cover this functionality by a separate SPL "mini" driver.
Separately we have a proper DM_SPI driver for U-Boot proper, which
provides access to the SPI flash through the "sf" command. That allows
to update the firmware on the SPI flash, also to store the environment
there.

However only very few boards actually enable support for U-Boot proper,
even though that would work and the SPL part is configured.

Use the cleaned up configuration scheme to enable SPI flash on those
boards which mention a SPI flash in their .dts, or which use the SPL SPI
support.

Out of the box this would enable storing the environment on the SPI
flash, and allows people to read or write the flash from U-Boot, for
instance to update the SPI flash when booted via an SD card.

For this to actually work there must be a "spi0" alias in the DT, which
most boards are missing. But this should be addressed separately.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig
index 745451c..4496aa4 100644
--- a/configs/orangepi_r1_defconfig
+++ b/configs/orangepi_r1_defconfig
@@ -8,6 +8,8 @@
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_CONSOLE_MUX=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
+CONFIG_SPI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y