* Code cleanup
* Patch by Sascha Hauer, 28 Jun:
- add generic support for Motorola i.MX architecture
- add support for mx1ads, mx1fs2 and scb9328 boards
* Patches by Marc Leeman, 23 Jul 2004:
- Add define for the PCI/Memory Buffer Configuration Register
- corrected comments in cpu/mpc824x/cpu_init.c
* Add support for multiple serial interfaces
(for example to allow modem dial-in / dial-out)
diff --git a/cpu/arm920t/imx_generic.c b/cpu/arm920t/imx_generic.c
new file mode 100644
index 0000000..aa7c8c1
--- /dev/null
+++ b/cpu/arm920t/imx_generic.c
@@ -0,0 +1,90 @@
+/*
+ * arch/arm/mach-imx/generic.c
+ *
+ * author: Sascha Hauer
+ * Created: april 20th, 2004
+ * Copyright: Synertronixx GmbH
+ *
+ * Common code for i.MX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_IMX
+
+#include <asm/arch/imx-regs.h>
+
+void imx_gpio_mode(int gpio_mode)
+{
+ unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+ unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
+ unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
+ unsigned int tmp;
+
+ /* Pullup enable */
+ if(gpio_mode & GPIO_PUEN)
+ PUEN(port) |= (1<<pin);
+ else
+ PUEN(port) &= ~(1<<pin);
+
+ /* Data direction */
+ if(gpio_mode & GPIO_OUT)
+ DDIR(port) |= 1<<pin;
+ else
+ DDIR(port) &= ~(1<<pin);
+
+ /* Primary / alternate function */
+ if(gpio_mode & GPIO_AF)
+ GPR(port) |= (1<<pin);
+ else
+ GPR(port) &= ~(1<<pin);
+
+ /* use as gpio? */
+ if( ocr == 3 )
+ GIUS(port) |= (1<<pin);
+ else
+ GIUS(port) &= ~(1<<pin);
+
+ /* Output / input configuration */
+ /* FIXME: I'm not very sure about OCR and ICONF, someone
+ * should have a look over it
+ */
+ if(pin<16) {
+ tmp = OCR1(port);
+ tmp &= ~( 3<<(pin*2));
+ tmp |= (ocr << (pin*2));
+ OCR1(port) = tmp;
+
+ if( gpio_mode & GPIO_AOUT )
+ ICONFA1(port) &= ~( 3<<(pin*2));
+ if( gpio_mode & GPIO_BOUT )
+ ICONFB1(port) &= ~( 3<<(pin*2));
+ } else {
+ tmp = OCR2(port);
+ tmp &= ~( 3<<((pin-16)*2));
+ tmp |= (ocr << ((pin-16)*2));
+ OCR2(port) = tmp;
+
+ if( gpio_mode & GPIO_AOUT )
+ ICONFA2(port) &= ~( 3<<((pin-16)*2));
+ if( gpio_mode & GPIO_BOUT )
+ ICONFB2(port) &= ~( 3<<((pin-16)*2));
+ }
+}
+
+#endif /* CONFIG_IMX */