* Code cleanup
* Patch by Sascha Hauer, 28 Jun:
- add generic support for Motorola i.MX architecture
- add support for mx1ads, mx1fs2 and scb9328 boards
* Patches by Marc Leeman, 23 Jul 2004:
- Add define for the PCI/Memory Buffer Configuration Register
- corrected comments in cpu/mpc824x/cpu_init.c
* Add support for multiple serial interfaces
(for example to allow modem dial-in / dial-out)
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
index 521c4f4..ea58f15 100644
--- a/cpu/arm920t/interrupts.c
+++ b/cpu/arm920t/interrupts.c
@@ -30,25 +30,11 @@
*/
#include <common.h>
-#include <arm920t.h>
-#if defined(CONFIG_S3C2400)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
+#include <arm920t.h>
#include <asm/proc-armv/ptrace.h>
extern void reset_cpu(ulong addr);
-int timer_load_val = 0;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-
- return (timers->TCNTO4 & 0xffff);
-}
#ifdef CONFIG_USE_IRQ
/* enable IRQ interrupts */
@@ -182,130 +168,3 @@
show_regs (pt_regs);
bad_mode ();
}
-
-static ulong timestamp;
-static ulong lastdec;
-
-int interrupt_init (void)
-{
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-
- /* use PWM Timer 4 because it has no output */
- /* prescaler for Timer 4 is 16 */
- timers->TCFG0 = 0x0f00;
- if (timer_load_val == 0)
- {
- /*
- * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
- * (default) and prescaler = 16. Should be 10390
- * @33.25MHz and 15625 @ 50 MHz
- */
- timer_load_val = get_PCLK()/(2 * 16 * 100);
- }
- /* load value for 10 ms timeout */
- lastdec = timers->TCNTB4 = timer_load_val;
- /* auto load, manual update of Timer 4 */
- timers->TCON = (timers->TCON & ~0x0700000) | 0x600000;
- /* auto load, start Timer 4 */
- timers->TCON = (timers->TCON & ~0x0700000) | 0x500000;
- timestamp = 0;
-
- return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
- reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
- return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
- timestamp = t;
-}
-
-void udelay (unsigned long usec)
-{
- ulong tmo;
- ulong start = get_timer(0);
-
- tmo = usec / 1000;
- tmo *= (timer_load_val * 100);
- tmo /= 1000;
-
- while ((ulong)(get_timer_masked () - start) < tmo)
- /*NOP*/;
-}
-
-void reset_timer_masked (void)
-{
- /* reset time */
- lastdec = READ_TIMER();
- timestamp = 0;
-}
-
-ulong get_timer_masked (void)
-{
- ulong now = READ_TIMER();
-
- if (lastdec >= now) {
- /* normal mode */
- timestamp += lastdec - now;
- } else {
- /* we have an overflow ... */
- timestamp += lastdec + timer_load_val - now;
- }
- lastdec = now;
-
- return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
- ulong tmo;
-
- tmo = usec / 1000;
- tmo *= (timer_load_val * 100);
- tmo /= 1000;
-
- reset_timer_masked ();
-
- while (get_timer_masked () < tmo)
- /*NOP*/;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
- ulong tbclk;
-
-#if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB)
- tbclk = timer_load_val * 100;
-#elif defined(CONFIG_SMDK2410) || defined(CONFIG_VCMA9)
- tbclk = CFG_HZ;
-#else
-# error "tbclk not configured"
-#endif
-
- return tbclk;
-}