blob: 4feb7519aa191a6625a1c14d96dd31381ba22eb7 [file] [log] [blame]
/*
* Copyright 2007 Freescale Semiconductor.
*
* (C) Copyright 2003 Motorola Inc.
* Modified by Xianghua Xiao, X.Xiao@motorola.com
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <asm/processor.h>
#include <ioports.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
int open_drain, int assign);
extern void qe_init(uint qe_base);
extern void qe_reset(void);
static void config_qe_ioports(void)
{
u8 port, pin;
int dir, open_drain, assign;
int i;
for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
port = qe_iop_conf_tab[i].port;
pin = qe_iop_conf_tab[i].pin;
dir = qe_iop_conf_tab[i].dir;
open_drain = qe_iop_conf_tab[i].open_drain;
assign = qe_iop_conf_tab[i].assign;
qe_config_iopin(port, pin, dir, open_drain, assign);
}
}
#endif
#ifdef CONFIG_CPM2
void config_8560_ioports (volatile ccsr_cpm_t * cpm)
{
int portnum;
for (portnum = 0; portnum < 4; portnum++) {
uint pmsk = 0,
ppar = 0,
psor = 0,
pdir = 0,
podr = 0,
pdat = 0;
iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
iop_conf_t *eiopc = iopc + 32;
uint msk = 1;
/*
* NOTE:
* index 0 refers to pin 31,
* index 31 refers to pin 0
*/
while (iopc < eiopc) {
if (iopc->conf) {
pmsk |= msk;
if (iopc->ppar)
ppar |= msk;
if (iopc->psor)
psor |= msk;
if (iopc->pdir)
pdir |= msk;
if (iopc->podr)
podr |= msk;
if (iopc->pdat)
pdat |= msk;
}
msk <<= 1;
iopc++;
}
if (pmsk != 0) {
volatile ioport_t *iop = ioport_addr (cpm, portnum);
uint tpmsk = ~pmsk;
/*
* the (somewhat confused) paragraph at the
* bottom of page 35-5 warns that there might
* be "unknown behaviour" when programming
* PSORx and PDIRx, if PPARx = 1, so I
* decided this meant I had to disable the
* dedicated function first, and enable it
* last.
*/
iop->ppar &= tpmsk;
iop->psor = (iop->psor & tpmsk) | psor;
iop->podr = (iop->podr & tpmsk) | podr;
iop->pdat = (iop->pdat & tpmsk) | pdat;
iop->pdir = (iop->pdir & tpmsk) | pdir;
iop->ppar |= ppar;
}
}
}
#endif
/* We run cpu_init_early_f in AS = 1 */
void cpu_init_early_f(void)
{
set_tlb(0, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
1, 0, BOOKE_PAGESZ_4K, 0);
/* set up CCSR if we want it moved */
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR_PHYS)
{
u32 temp;
set_tlb(0, CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR_DEFAULT,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
1, 1, BOOKE_PAGESZ_4K, 0);
temp = in_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT);
out_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR_PHYS >> 12);
temp = in_be32((volatile u32 *)CFG_CCSRBAR);
}
#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
init_laws();
invalidate_tlb(0);
init_tlbs();
}
/*
* Breathe some life into the CPU...
*
* Set up the memory map
* initialize a bunch of registers
*/
void cpu_init_f (void)
{
volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
extern void m8560_cpm_reset (void);
disable_tlb(14);
disable_tlb(15);
#ifdef CONFIG_CPM2
config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
#endif
/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
* addresses - these have to be modified later when FLASH size
* has been determined
*/
#if defined(CFG_OR0_REMAP)
memctl->or0 = CFG_OR0_REMAP;
#endif
#if defined(CFG_OR1_REMAP)
memctl->or1 = CFG_OR1_REMAP;
#endif
/* now restrict to preliminary range */
/* if cs1 is already set via debugger, leave cs0/cs1 alone */
if (! memctl->br1 & 1) {
#if defined(CFG_BR0_PRELIM) && defined(CFG_OR0_PRELIM)
memctl->br0 = CFG_BR0_PRELIM;
memctl->or0 = CFG_OR0_PRELIM;
#endif
#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
memctl->or1 = CFG_OR1_PRELIM;
memctl->br1 = CFG_BR1_PRELIM;
#endif
}
#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
memctl->or2 = CFG_OR2_PRELIM;
memctl->br2 = CFG_BR2_PRELIM;
#endif
#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
memctl->or3 = CFG_OR3_PRELIM;
memctl->br3 = CFG_BR3_PRELIM;
#endif
#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
memctl->or4 = CFG_OR4_PRELIM;
memctl->br4 = CFG_BR4_PRELIM;
#endif
#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
memctl->or5 = CFG_OR5_PRELIM;
memctl->br5 = CFG_BR5_PRELIM;
#endif
#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
memctl->or6 = CFG_OR6_PRELIM;
memctl->br6 = CFG_BR6_PRELIM;
#endif
#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
memctl->or7 = CFG_OR7_PRELIM;
memctl->br7 = CFG_BR7_PRELIM;
#endif
#if defined(CONFIG_CPM2)
m8560_cpm_reset();
#endif
#ifdef CONFIG_QE
/* Config QE ioports */
config_qe_ioports();
#endif
}
/*
* Initialize L2 as cache.
*
* The newer 8548, etc, parts have twice as much cache, but
* use the same bit-encoding as the older 8555, etc, parts.
*
*/
int cpu_init_r(void)
{
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
uint svr, ver;
uint l2srbar;
u32 l2siz_field;
svr = get_svr();
ver = SVR_SOC_VER(svr);
asm("msync;isync");
cache_ctl = l2cache->l2ctl;
l2siz_field = (cache_ctl >> 28) & 0x3;
switch (l2siz_field) {
case 0x0:
printf(" unknown size (0x%08x)\n", cache_ctl);
return -1;
break;
case 0x1:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8541_E ||
ver == SVR_8555 || ver == SVR_8555_E) {
puts("128 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
cache_ctl = 0xc4000000;
} else {
puts("256 KB ");
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
}
break;
case 0x2:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8541_E ||
ver == SVR_8555 || ver == SVR_8555_E) {
puts("256 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
cache_ctl = 0xc8000000;
} else {
puts ("512 KB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
}
break;
case 0x3:
puts("1024 KB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
break;
}
if (l2cache->l2ctl & 0x80000000) {
puts("already enabled");
l2srbar = l2cache->l2srbar0;
#ifdef CFG_INIT_L2_ADDR
if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
l2srbar = CFG_INIT_L2_ADDR;
l2cache->l2srbar0 = l2srbar;
printf("moving to 0x%08x", CFG_INIT_L2_ADDR);
}
#endif /* CFG_INIT_L2_ADDR */
puts("\n");
} else {
asm("msync;isync");
l2cache->l2ctl = cache_ctl; /* invalidate & enable */
asm("msync;isync");
puts("enabled\n");
}
#else
puts("disabled\n");
#endif
#ifdef CONFIG_QE
uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */
qe_init(qe_base);
qe_reset();
#endif
#if defined(CONFIG_MP)
setup_mp();
#endif
return 0;
}