ARM: dts: k3: Add cfg register space for ringacc and udmap
R5 SPL needs access to cfg space of Rings and UDMAP, therefore add RING
CFG, TCHAN CFG and RCHAN CFG address ranges.
Note that these registers are present within respective IPs but are
not populated in Linux DT nodes (as they are configured via TISCI APIs)
and hence are added to -u-boot.dtsi for now.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210607141753.28796-6-vigneshr@ti.com
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index b0602d1..2840258 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -35,11 +35,25 @@
u-boot,dm-spl;
ringacc@2b800000 {
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>,
+ <0x0 0x28440000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
u-boot,dm-spl;
ti,dma-ring-reset-quirk;
};
dma-controller@285c0000 {
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchan", "rchanrt", "tchan",
+ "tchanrt", "rflow";
u-boot,dm-spl;
};
};
diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
index c3aae65..41ce9fc 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -40,6 +40,32 @@
chipid@43000014 {
u-boot,dm-spl;
};
+
+ mcu-navss{
+ u-boot,dm-spl;
+
+ ringacc@2b800000 {
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>,
+ <0x0 0x28440000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+ u-boot,dm-spl;
+ };
+
+ dma-controller@285c0000 {
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchan", "rchanrt", "tchan",
+ "tchanrt", "rflow";
+ u-boot,dm-spl;
+ };
+ };
};
&secure_proxy_main {
diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
index 9513318..974dae8 100644
--- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -54,10 +54,24 @@
u-boot,dm-spl;
ringacc@2b800000 {
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>,
+ <0x0 0x28440000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
u-boot,dm-spl;
};
dma-controller@285c0000 {
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchan", "rchanrt", "tchan",
+ "tchanrt", "rflow";
u-boot,dm-spl;
};
};