dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOs
This new method is much easier and matches the kernel.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts
index 43b9911..10f3992 100644
--- a/arch/arm/dts/tegra20-seaboard.dts
+++ b/arch/arm/dts/tegra20-seaboard.dts
@@ -65,7 +65,7 @@
};
nand-controller@70008000 {
- nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */
+ nvidia,wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
nvidia,width = <8>;
nvidia,timing = <26 100 20 80 20 10 12 10 70>;
nand@0 {
@@ -151,7 +151,7 @@
};
usb@c5000000 {
- nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
dr_mode = "otg";
};
@@ -161,9 +161,9 @@
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -186,10 +186,14 @@
hsync-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 2 0>;
- nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */
- nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
- nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
- nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
+ nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(D, 4)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(C, 6)
+ GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <400 4 203 17 15>;
};
};