imx: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
Cc: Adam Ford <aford173@gmail.com>
Cc: Vanessa Maegima <vanessa.maegima@nxp.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/board/beacon/imx8mm/README b/board/beacon/imx8mm/README
index 4223fbd..dce176f 100644
--- a/board/beacon/imx8mm/README
+++ b/board/beacon/imx8mm/README
@@ -26,7 +26,7 @@
Build U-Boot
============
$ make imx8mm_beacon_defconfig
-$ make flash.bin ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000
+$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000
Burn U-Boot to microSD Card
===========================
diff --git a/board/logicpd/imx6/README b/board/logicpd/imx6/README
index 26d053a..19f79c5 100644
--- a/board/logicpd/imx6/README
+++ b/board/logicpd/imx6/README
@@ -17,7 +17,7 @@
To build U-Boot for the Dual and Quad variants:
make imx6q_logic_defconfig
- make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux-
+ make u-boot.imx CROSS_COMPILE=arm-linux-
Flashing U-Boot into the SD card
diff --git a/board/technexion/pico-imx7d/README.pico-imx7d_BL33 b/board/technexion/pico-imx7d/README.pico-imx7d_BL33
index 40324ff..1b34609 100644
--- a/board/technexion/pico-imx7d/README.pico-imx7d_BL33
+++ b/board/technexion/pico-imx7d/README.pico-imx7d_BL33
@@ -4,7 +4,7 @@
world in this case.
- Build u-boot
- Set environment variable of CROSS_COMPILE for your toolchain and ARCH=arm
+ Set environment variable of CROSS_COMPILE for your toolchain
$ make pico-imx7d_bl33_defconfig
$ make all