pci: add Amlogic Meson Designware PCIe controller
Add support for the DW PCIe controller found in the Amlogic Meson AXG and
G12 (G12A, G12B, SM1) SoCs.
This uses the common DW PCIe helpers introducted previously.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index cacfc4b..cdcdd8f 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -276,6 +276,14 @@
Say Y here if you want to enable Gen2 PCIe controller,
which could be found on MT7623 SoC family.
+config PCIE_DW_MESON
+ bool "Amlogic Meson DesignWare based PCIe controller"
+ depends on ARCH_MESON
+ select PCIE_DW_COMMON
+ help
+ Say Y here if you want to enable DW PCIe controller support on
+ Amlogic SoCs.
+
config PCIE_ROCKCHIP
bool "Enable Rockchip PCIe driver"
depends on ARCH_ROCKCHIP
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index e3ca8b2..96d6182 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -50,5 +50,6 @@
obj-$(CONFIG_PCIE_MEDIATEK) += pcie_mediatek.o
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o
obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o
+obj-$(CONFIG_PCIE_DW_MESON) += pcie_dw_meson.o
obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o
obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o
diff --git a/drivers/pci/pcie_dw_meson.c b/drivers/pci/pcie_dw_meson.c
new file mode 100644
index 0000000..0525ecb
--- /dev/null
+++ b/drivers/pci/pcie_dw_meson.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic DesignWare based PCIe host controller driver
+ *
+ * Copyright (c) 2021 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Based on pcie_dw_rockchip.c
+ * Copyright (c) 2021 Rockchip, Inc.
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <pci.h>
+#include <power-domain.h>
+#include <reset.h>
+#include <syscon.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+#include <dm/device_compat.h>
+#include <linux/iopoll.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+#include <linux/bitfield.h>
+
+#include "pcie_dw_common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * struct meson_pcie - Amlogic Meson DW PCIe controller state
+ *
+ * @pci: The common PCIe DW structure
+ * @meson_cfg_base: The base address of vendor regs
+ * @phy
+ * @clk_port
+ * @clk_general
+ * @clk_pclk
+ * @rsts
+ * @rst_gpio: The #PERST signal for slot
+ */
+struct meson_pcie {
+ /* Must be first member of the struct */
+ struct pcie_dw dw;
+ void *meson_cfg_base;
+ struct phy phy;
+ struct clk clk_port;
+ struct clk clk_general;
+ struct clk clk_pclk;
+ struct reset_ctl_bulk rsts;
+ struct gpio_desc rst_gpio;
+};
+
+#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */
+
+#define PCIE_CAP_MAX_PAYLOAD_SIZE(x) ((x) << 5)
+#define PCIE_CAP_MAX_READ_REQ_SIZE(x) ((x) << 12)
+
+/* PCIe specific config registers */
+#define PCIE_CFG0 0x0
+#define APP_LTSSM_ENABLE BIT(7)
+
+#define PCIE_CFG_STATUS12 0x30
+#define IS_SMLH_LINK_UP(x) ((x) & (1 << 6))
+#define IS_RDLH_LINK_UP(x) ((x) & (1 << 16))
+#define IS_LTSSM_UP(x) ((((x) >> 10) & 0x1f) == 0x11)
+
+#define PCIE_CFG_STATUS17 0x44
+#define PM_CURRENT_STATE(x) (((x) >> 7) & 0x1)
+
+#define WAIT_LINKUP_TIMEOUT 4000
+#define PORT_CLK_RATE 100000000UL
+#define MAX_PAYLOAD_SIZE 256
+#define MAX_READ_REQ_SIZE 256
+#define PCIE_RESET_DELAY 500
+#define PCIE_SHARED_RESET 1
+#define PCIE_NORMAL_RESET 0
+
+enum pcie_data_rate {
+ PCIE_GEN1,
+ PCIE_GEN2,
+ PCIE_GEN3,
+ PCIE_GEN4
+};
+
+/* Parameters for the waiting for #perst signal */
+#define PERST_WAIT_US 1000000
+
+static inline u32 meson_cfg_readl(struct meson_pcie *priv, u32 reg)
+{
+ return readl(priv->meson_cfg_base + reg);
+}
+
+static inline void meson_cfg_writel(struct meson_pcie *priv, u32 val, u32 reg)
+{
+ writel(val, priv->meson_cfg_base + reg);
+}
+
+/**
+ * meson_pcie_configure() - Configure link
+ *
+ * @meson_pcie: Pointer to the PCI controller state
+ *
+ * Configure the link mode and width
+ */
+static void meson_pcie_configure(struct meson_pcie *priv)
+{
+ u32 val;
+
+ dw_pcie_dbi_write_enable(&priv->dw, true);
+
+ val = readl(priv->dw.dbi_base + PCIE_PORT_LINK_CONTROL);
+ val &= ~PORT_LINK_FAST_LINK_MODE;
+ val |= PORT_LINK_DLL_LINK_EN;
+ val &= ~PORT_LINK_MODE_MASK;
+ val |= PORT_LINK_MODE_1_LANES;
+ writel(val, priv->dw.dbi_base + PCIE_PORT_LINK_CONTROL);
+
+ val = readl(priv->dw.dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+ val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
+ val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
+ writel(val, priv->dw.dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+
+ dw_pcie_dbi_write_enable(&priv->dw, false);
+}
+
+static inline void meson_pcie_enable_ltssm(struct meson_pcie *priv)
+{
+ u32 val;
+
+ val = meson_cfg_readl(priv, PCIE_CFG0);
+ val |= APP_LTSSM_ENABLE;
+ meson_cfg_writel(priv, val, PCIE_CFG0);
+}
+
+static int meson_pcie_wait_link_up(struct meson_pcie *priv)
+{
+ u32 speed_okay = 0;
+ u32 cnt = 0;
+ u32 state12, state17, smlh_up, ltssm_up, rdlh_up;
+
+ do {
+ state12 = meson_cfg_readl(priv, PCIE_CFG_STATUS12);
+ state17 = meson_cfg_readl(priv, PCIE_CFG_STATUS17);
+ smlh_up = IS_SMLH_LINK_UP(state12);
+ rdlh_up = IS_RDLH_LINK_UP(state12);
+ ltssm_up = IS_LTSSM_UP(state12);
+
+ if (PM_CURRENT_STATE(state17) < PCIE_GEN3)
+ speed_okay = 1;
+
+ if (smlh_up)
+ debug("%s: smlh_link_up is on\n", __func__);
+ if (rdlh_up)
+ debug("%s: rdlh_link_up is on\n", __func__);
+ if (ltssm_up)
+ debug("%s: ltssm_up is on\n", __func__);
+ if (speed_okay)
+ debug("%s: speed_okay\n", __func__);
+
+ if (smlh_up && rdlh_up && ltssm_up && speed_okay)
+ return 0;
+
+ cnt++;
+
+ udelay(10);
+ } while (cnt < WAIT_LINKUP_TIMEOUT);
+
+ printf("%s: error: wait linkup timeout\n", __func__);
+ return -EIO;
+}
+
+/**
+ * meson_pcie_link_up() - Wait for the link to come up
+ *
+ * @meson_pcie: Pointer to the PCI controller state
+ * @cap_speed: Desired link speed
+ *
+ * Return: 1 (true) for active line and negative (false) for no link (timeout)
+ */
+static int meson_pcie_link_up(struct meson_pcie *priv, u32 cap_speed)
+{
+ /* DW link configurations */
+ meson_pcie_configure(priv);
+
+ /* Reset the device */
+ if (dm_gpio_is_valid(&priv->rst_gpio)) {
+ dm_gpio_set_value(&priv->rst_gpio, 1);
+ /*
+ * Minimal is 100ms from spec but we see
+ * some wired devices need much more, such as 600ms.
+ * Add a enough delay to cover all cases.
+ */
+ udelay(PERST_WAIT_US);
+ dm_gpio_set_value(&priv->rst_gpio, 0);
+ }
+
+ /* Enable LTSSM */
+ meson_pcie_enable_ltssm(priv);
+
+ return meson_pcie_wait_link_up(priv);
+}
+
+static int meson_size_to_payload(int size)
+{
+ /*
+ * dwc supports 2^(val+7) payload size, which val is 0~5 default to 1.
+ * So if input size is not 2^order alignment or less than 2^7 or bigger
+ * than 2^12, just set to default size 2^(1+7).
+ */
+ if (!is_power_of_2(size) || size < 128 || size > 4096) {
+ debug("%s: payload size %d, set to default 256\n", __func__, size);
+ return 1;
+ }
+
+ return fls(size) - 8;
+}
+
+static void meson_set_max_payload(struct meson_pcie *priv, int size)
+{
+ u32 val;
+ u16 offset = dm_pci_find_capability(priv->dw.dev, PCI_CAP_ID_EXP);
+ int max_payload_size = meson_size_to_payload(size);
+
+ dw_pcie_dbi_write_enable(&priv->dw, true);
+
+ val = readl(priv->dw.dbi_base + offset + PCI_EXP_DEVCTL);
+ val &= ~PCI_EXP_DEVCTL_PAYLOAD;
+ writel(val, priv->dw.dbi_base + offset + PCI_EXP_DEVCTL);
+
+ val = readl(priv->dw.dbi_base + offset + PCI_EXP_DEVCTL);
+ val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
+ writel(val, priv->dw.dbi_base + PCI_EXP_DEVCTL);
+
+ dw_pcie_dbi_write_enable(&priv->dw, false);
+}
+
+static void meson_set_max_rd_req_size(struct meson_pcie *priv, int size)
+{
+ u32 val;
+ u16 offset = dm_pci_find_capability(priv->dw.dev, PCI_CAP_ID_EXP);
+ int max_rd_req_size = meson_size_to_payload(size);
+
+ dw_pcie_dbi_write_enable(&priv->dw, true);
+
+ val = readl(priv->dw.dbi_base + offset + PCI_EXP_DEVCTL);
+ val &= ~PCI_EXP_DEVCTL_PAYLOAD;
+ writel(val, priv->dw.dbi_base + offset + PCI_EXP_DEVCTL);
+
+ val = readl(priv->dw.dbi_base + offset + PCI_EXP_DEVCTL);
+ val |= PCIE_CAP_MAX_READ_REQ_SIZE(max_rd_req_size);
+ writel(val, priv->dw.dbi_base + PCI_EXP_DEVCTL);
+
+ dw_pcie_dbi_write_enable(&priv->dw, false);
+}
+
+static int meson_pcie_init_port(struct udevice *dev)
+{
+ int ret;
+ struct meson_pcie *priv = dev_get_priv(dev);
+
+ ret = generic_phy_init(&priv->phy);
+ if (ret) {
+ dev_err(dev, "failed to init phy (ret=%d)\n", ret);
+ return ret;
+ }
+
+ ret = generic_phy_power_on(&priv->phy);
+ if (ret) {
+ dev_err(dev, "failed to power on phy (ret=%d)\n", ret);
+ goto err_exit_phy;
+ }
+
+ ret = generic_phy_reset(&priv->phy);
+ if (ret) {
+ dev_err(dev, "failed to reset phy (ret=%d)\n", ret);
+ goto err_exit_phy;
+ }
+
+ ret = reset_assert_bulk(&priv->rsts);
+ if (ret) {
+ dev_err(dev, "failed to assert resets (ret=%d)\n", ret);
+ goto err_power_off_phy;
+ }
+
+ udelay(PCIE_RESET_DELAY);
+
+ ret = reset_deassert_bulk(&priv->rsts);
+ if (ret) {
+ dev_err(dev, "failed to deassert resets (ret=%d)\n", ret);
+ goto err_power_off_phy;
+ }
+
+ udelay(PCIE_RESET_DELAY);
+
+ ret = clk_set_rate(&priv->clk_port, PORT_CLK_RATE);
+ if (ret) {
+ dev_err(dev, "failed to set port clk rate (ret=%d)\n", ret);
+ goto err_deassert_bulk;
+ }
+
+ ret = clk_enable(&priv->clk_general);
+ if (ret) {
+ dev_err(dev, "failed to enable clk general (ret=%d)\n", ret);
+ goto err_deassert_bulk;
+ }
+
+ ret = clk_enable(&priv->clk_pclk);
+ if (ret) {
+ dev_err(dev, "failed to enable pclk (ret=%d)\n", ret);
+ goto err_deassert_bulk;
+ }
+
+ meson_set_max_payload(priv, MAX_PAYLOAD_SIZE);
+ meson_set_max_rd_req_size(priv, MAX_READ_REQ_SIZE);
+
+ pcie_dw_setup_host(&priv->dw);
+
+ ret = meson_pcie_link_up(priv, LINK_SPEED_GEN_2);
+ if (ret < 0)
+ goto err_link_up;
+
+ return 0;
+err_link_up:
+ clk_disable(&priv->clk_port);
+ clk_disable(&priv->clk_general);
+ clk_disable(&priv->clk_pclk);
+err_deassert_bulk:
+ reset_assert_bulk(&priv->rsts);
+err_power_off_phy:
+ generic_phy_power_off(&priv->phy);
+err_exit_phy:
+ generic_phy_exit(&priv->phy);
+
+ return ret;
+}
+
+static int meson_pcie_parse_dt(struct udevice *dev)
+{
+ struct meson_pcie *priv = dev_get_priv(dev);
+ int ret;
+
+ priv->dw.dbi_base = (void *)dev_read_addr_index(dev, 0);
+ if (!priv->dw.dbi_base)
+ return -ENODEV;
+
+ dev_dbg(dev, "ELBI address is 0x%p\n", priv->dw.dbi_base);
+
+ priv->meson_cfg_base = (void *)dev_read_addr_index(dev, 1);
+ if (!priv->meson_cfg_base)
+ return -ENODEV;
+
+ dev_dbg(dev, "CFG address is 0x%p\n", priv->meson_cfg_base);
+
+ ret = gpio_request_by_name(dev, "reset-gpios", 0,
+ &priv->rst_gpio, GPIOD_IS_OUT);
+ if (ret) {
+ dev_err(dev, "failed to find reset-gpios property\n");
+ return ret;
+ }
+
+ ret = reset_get_bulk(dev, &priv->rsts);
+ if (ret) {
+ dev_err(dev, "Can't get reset: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_get_by_name(dev, "port", &priv->clk_port);
+ if (ret) {
+ dev_err(dev, "Can't get port clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_get_by_name(dev, "general", &priv->clk_general);
+ if (ret) {
+ dev_err(dev, "Can't get port clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_get_by_name(dev, "pclk", &priv->clk_pclk);
+ if (ret) {
+ dev_err(dev, "Can't get port clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = generic_phy_get_by_index(dev, 0, &priv->phy);
+ if (ret) {
+ dev_err(dev, "failed to get pcie phy (ret=%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * meson_pcie_probe() - Probe the PCIe bus for active link
+ *
+ * @dev: A pointer to the device being operated on
+ *
+ * Probe for an active link on the PCIe bus and configure the controller
+ * to enable this port.
+ *
+ * Return: 0 on success, else -ENODEV
+ */
+static int meson_pcie_probe(struct udevice *dev)
+{
+ struct meson_pcie *priv = dev_get_priv(dev);
+ struct udevice *ctlr = pci_get_controller(dev);
+ struct pci_controller *hose = dev_get_uclass_priv(ctlr);
+ int ret = 0;
+
+ priv->dw.first_busno = dev_seq(dev);
+ priv->dw.dev = dev;
+
+ ret = meson_pcie_parse_dt(dev);
+ if (ret)
+ return ret;
+
+ ret = meson_pcie_init_port(dev);
+ if (ret) {
+ dm_gpio_free(dev, &priv->rst_gpio);
+ return ret;
+ }
+
+ printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n",
+ dev_seq(dev), pcie_dw_get_link_speed(&priv->dw),
+ pcie_dw_get_link_width(&priv->dw),
+ hose->first_busno);
+
+ return pcie_dw_prog_outbound_atu_unroll(&priv->dw,
+ PCIE_ATU_REGION_INDEX0,
+ PCIE_ATU_TYPE_MEM,
+ priv->dw.mem.phys_start,
+ priv->dw.mem.bus_start,
+ priv->dw.mem.size);
+}
+
+static const struct dm_pci_ops meson_pcie_ops = {
+ .read_config = pcie_dw_read_config,
+ .write_config = pcie_dw_write_config,
+};
+
+static const struct udevice_id meson_pcie_ids[] = {
+ { .compatible = "amlogic,axg-pcie" },
+ { .compatible = "amlogic,g12a-pcie" },
+ { }
+};
+
+U_BOOT_DRIVER(meson_dw_pcie) = {
+ .name = "pcie_dw_meson",
+ .id = UCLASS_PCI,
+ .of_match = meson_pcie_ids,
+ .ops = &meson_pcie_ops,
+ .probe = meson_pcie_probe,
+ .priv_auto = sizeof(struct meson_pcie),
+};