| # The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, |
| # sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. |
| # |
| # This defconfig is for the v1.1 pcb with an a33 soc. |
| CONFIG_SPL=y |
| CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" |
| CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" |
| CONFIG_USB_MUSB_SUNXI=y |
| CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" |
| CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" |
| CONFIG_AXP_GPIO=y |
| CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0" |
| CONFIG_VIDEO_LCD_PANEL_LVDS=y |
| CONFIG_VIDEO_LCD_DCLK_PHASE=0 |
| CONFIG_VIDEO_LCD_POWER="PH7" |
| CONFIG_VIDEO_LCD_BL_EN="PH6" |
| CONFIG_VIDEO_LCD_BL_PWM="PH0" |
| #CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n |
| CONFIG_ARM=y |
| CONFIG_ARCH_SUNXI=y |
| CONFIG_MACH_SUN8I_A33=y |
| CONFIG_DRAM_CLK=432 |
| # zq = 0x3bbb |
| CONFIG_DRAM_ZQ=15291 |
| CONFIG_DRAM_ODT_EN=y |
| # Wifi power |
| CONFIG_AXP221_DLDO1_VOLT=3300 |
| # aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP |
| CONFIG_AXP221_ALDO1_VOLT=3000 |