mmc: sdhci: use the generic error number
Use the generic error number instead of meaningless value.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
index c1d8700..cb2bd40 100644
--- a/drivers/mmc/bcm2835_sdhci.c
+++ b/drivers/mmc/bcm2835_sdhci.c
@@ -157,7 +157,7 @@
bcm_host = calloc(1, sizeof(*bcm_host));
if (!bcm_host) {
printf("sdhci_host calloc fail!\n");
- return 1;
+ return -ENOMEM;
}
/*
diff --git a/drivers/mmc/ftsdc021_sdhci.c b/drivers/mmc/ftsdc021_sdhci.c
index 1f6cdba..6e9fefa 100644
--- a/drivers/mmc/ftsdc021_sdhci.c
+++ b/drivers/mmc/ftsdc021_sdhci.c
@@ -21,7 +21,7 @@
host = calloc(1, sizeof(struct sdhci_host));
if (!host) {
puts("sdh_host malloc fail!\n");
- return 1;
+ return -ENOMEM;
}
host->name = "FTSDC021";
diff --git a/drivers/mmc/kona_sdhci.c b/drivers/mmc/kona_sdhci.c
index c67a262..549f6bc 100644
--- a/drivers/mmc/kona_sdhci.c
+++ b/drivers/mmc/kona_sdhci.c
@@ -27,7 +27,7 @@
if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & SDHCI_RESET_ALL) {
printf("%s: sd host controller reset error\n", __func__);
- return 1;
+ return -EBUSY;
}
/* For kona a hardware reset before anything else. */
@@ -39,7 +39,7 @@
do {
if (timeout == 0) {
printf("%s: reset timeout error\n", __func__);
- return 1;
+ return -ETIMEDOUT;
}
timeout--;
udelay(100);
@@ -67,7 +67,7 @@
while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
if (timeout == 0) {
printf("%s: CARD DETECT timeout error\n", __func__);
- return 1;
+ return -ETIMEDOUT;
}
timeout--;
udelay(100);
diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c
index ca5f872..e388ad1 100644
--- a/drivers/mmc/mv_sdhci.c
+++ b/drivers/mmc/mv_sdhci.c
@@ -71,7 +71,7 @@
host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
if (!host) {
printf("sdh_host malloc fail!\n");
- return 1;
+ return -ENOMEM;
}
host->name = MVSDH_NAME;
diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
index d7cfa3e..b329bef 100644
--- a/drivers/mmc/s5p_sdhci.c
+++ b/drivers/mmc/s5p_sdhci.c
@@ -100,7 +100,7 @@
struct sdhci_host *host = calloc(1, sizeof(struct sdhci_host));
if (!host) {
printf("sdhci__host allocation fail!\n");
- return 1;
+ return -ENOMEM;
}
host->ioaddr = (void *)regbase;
host->index = index;
@@ -154,7 +154,7 @@
dev_id = pinmux_decode_periph_id(blob, node);
if (dev_id < PERIPH_ID_SDMMC0 && dev_id > PERIPH_ID_SDMMC3) {
debug("MMC: Can't get device id\n");
- return -1;
+ return -EINVAL;
}
host->index = dev_id - PERIPH_ID_SDMMC0;
@@ -162,7 +162,7 @@
bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
if (bus_width <= 0) {
debug("MMC: Can't get bus-width\n");
- return -1;
+ return -EINVAL;
}
host->bus_width = bus_width;
@@ -170,7 +170,7 @@
base = fdtdec_get_addr(blob, node, "reg");
if (!base) {
debug("MMC: Can't get base address\n");
- return -1;
+ return -EINVAL;
}
host->ioaddr = (void *)base;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 7337722..837c538 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -87,7 +87,7 @@
if (stat & SDHCI_INT_ERROR) {
printf("%s: Error detected in status(0x%X)!\n",
__func__, stat);
- return -1;
+ return -EIO;
}
if (stat & rdy) {
if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask))
@@ -110,7 +110,7 @@
udelay(10);
else {
printf("%s: Transfer data timeout\n", __func__);
- return -1;
+ return -ETIMEDOUT;
}
} while (!(stat & SDHCI_INT_DATA_END));
return 0;
@@ -303,7 +303,7 @@
if (timeout == 0) {
printf("%s: Timeout to wait cmd & data inhibit\n",
__func__);
- return -1;
+ return -EBUSY;
}
timeout--;
@@ -374,7 +374,7 @@
if (timeout == 0) {
printf("%s: Internal clock never stabilised.\n",
__func__);
- return -1;
+ return -EBUSY;
}
timeout--;
udelay(1000);
@@ -477,7 +477,7 @@
if (!aligned_buffer) {
printf("%s: Aligned buffer alloc failed!!!\n",
__func__);
- return -1;
+ return -ENOMEM;
}
}
@@ -631,7 +631,7 @@
host->mmc = mmc_create(&host->cfg, host);
if (host->mmc == NULL) {
printf("%s: mmc create fail!\n", __func__);
- return -1;
+ return -ENOMEM;
}
return 0;