Merge branch 'next'
diff --git a/Makefile b/Makefile
index c80b321..45f1075 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
VERSION = 2022
PATCHLEVEL = 10
SUBLEVEL =
-EXTRAVERSION = -rc5
+EXTRAVERSION =
NAME =
# *DOCUMENTATION*
diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
index 78773c1..3a9ba8b 100644
--- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
@@ -26,6 +26,10 @@
u-boot,dm-spl;
};
+&spba1 {
+ u-boot,dm-spl;
+};
+
&clk {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
diff --git a/arch/arm/dts/imx8mn-venice-u-boot.dtsi b/arch/arm/dts/imx8mn-venice-u-boot.dtsi
index 9fb3871..9debf96 100644
--- a/arch/arm/dts/imx8mn-venice-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-venice-u-boot.dtsi
@@ -20,6 +20,10 @@
u-boot,dm-spl;
};
+&spba1 {
+ u-boot,dm-spl;
+};
+
&clk {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
diff --git a/board/armltd/vexpress64/lowlevel_init.S b/board/armltd/vexpress64/lowlevel_init.S
index 3dcfb85..68ca3f2 100644
--- a/board/armltd/vexpress64/lowlevel_init.S
+++ b/board/armltd/vexpress64/lowlevel_init.S
@@ -7,6 +7,6 @@
save_boot_params:
adr x8, prior_stage_fdt_address
- str x0, [x8]
+ stp x0, x1, [x8]
b save_boot_params_ret
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index 05a7a25..af326dc 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -100,7 +100,7 @@
* Push the variable into the .data section so that it
* does not get cleared later.
*/
-unsigned long __section(".data") prior_stage_fdt_address;
+unsigned long __section(".data") prior_stage_fdt_address[2];
#ifdef CONFIG_OF_BOARD
@@ -151,6 +151,23 @@
}
#endif
+/*
+ * Filter for a valid DTB, as TF-A happens to provide a pointer to some
+ * data structure using the DTB format, which we cannot use.
+ * The address of the DTB cannot be 0, in fact this is the reserved value
+ * for x1 in the kernel boot protocol.
+ * And while the nt_fw_config.dtb used by TF-A is a valid DTB structure, it
+ * does not contain the typical nodes and properties, which we test for by
+ * probing for the mandatory /memory node.
+ */
+static bool is_valid_dtb(uintptr_t dtb_ptr)
+{
+ if (dtb_ptr == 0 || fdt_magic(dtb_ptr) != FDT_MAGIC)
+ return false;
+
+ return fdt_subnode_offset((void *)dtb_ptr, 0, "memory") >= 0;
+}
+
void *board_fdt_blob_setup(int *err)
{
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
@@ -172,10 +189,12 @@
}
#endif
- if (fdt_magic(prior_stage_fdt_address) == FDT_MAGIC &&
- fdt_totalsize(prior_stage_fdt_address) > 0x100) {
+ if (is_valid_dtb(prior_stage_fdt_address[1])) {
*err = 0;
- return (void *)prior_stage_fdt_address;
+ return (void *)prior_stage_fdt_address[1];
+ } else if (is_valid_dtb(prior_stage_fdt_address[0])) {
+ *err = 0;
+ return (void *)prior_stage_fdt_address[0];
}
if (fdt_magic(gd->fdt_blob) == FDT_MAGIC) {
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index 9fa7b7b..c37629f 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -444,6 +444,16 @@
if (rc)
return rc;
+ /*
+ * Handle case of bad 2 byte eeproms that responds to 1 byte addressing
+ * but gets stuck in const addressing when read requests are performed
+ * on offsets. We re-read the board ID to ensure we have sane data back
+ */
+ rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
+ sizeof(board_id), (uint8_t *)&board_id);
+ if (rc)
+ return rc;
+
if (board_id.header.id != TI_AM6_EEPROM_RECORD_BOARD_ID) {
pr_err("%s: Invalid board ID record!\n", __func__);
return -EINVAL;
diff --git a/cmd/pci.c b/cmd/pci.c
index 6258699..58a7475 100644
--- a/cmd/pci.c
+++ b/cmd/pci.c
@@ -452,7 +452,6 @@
{ PCI_REGION_PREFETCH, "prefetch" },
{ PCI_REGION_SYS_MEMORY, "sysmem" },
{ PCI_REGION_RO, "readonly" },
- { PCI_REGION_IO, "io" },
};
static void pci_show_regions(struct udevice *bus)
diff --git a/common/autoboot.c b/common/autoboot.c
index 63f2587..cdafe76 100644
--- a/common/autoboot.c
+++ b/common/autoboot.c
@@ -115,6 +115,7 @@
presskey_len++;
}
}
+ udelay(10000);
} while (never_timeout || get_ticks() <= etime);
return abort;
@@ -206,6 +207,7 @@
if (slow_equals(sha, sha_env, SHA256_SUM_LEN))
abort = 1;
}
+ udelay(10000);
} while (!abort && get_ticks() <= etime);
free(presskey);
@@ -293,6 +295,7 @@
abort = 1;
}
}
+ udelay(10000);
} while (!abort && get_ticks() <= etime);
return abort;
diff --git a/common/board_r.c b/common/board_r.c
index 6e1ad2b..92ca206 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -151,13 +151,13 @@
*/
gd->env_addr += gd->reloc_off;
#endif
-#ifdef CONFIG_OF_EMBED
/*
* The fdt_blob needs to be moved to new relocation address
* incase of FDT blob is embedded with in image
*/
- gd->fdt_blob += gd->reloc_off;
-#endif
+ if (CONFIG_IS_ENABLED(OF_EMBED) && CONFIG_IS_ENABLED(NEEDS_MANUAL_RELOC))
+ gd->fdt_blob += gd->reloc_off;
+
#ifdef CONFIG_EFI_LOADER
/*
* On the ARM architecture gd is mapped to a fixed register (r9 or x18).
diff --git a/configs/evb-px30_defconfig b/configs/evb-px30_defconfig
index 240a044..4f88879 100644
--- a/configs/evb-px30_defconfig
+++ b/configs/evb-px30_defconfig
@@ -17,7 +17,6 @@
CONFIG_DEBUG_UART_BASE=0xFF160000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000
diff --git a/configs/evb-px5_defconfig b/configs/evb-px5_defconfig
index 8112b42..40df289 100644
--- a/configs/evb-px5_defconfig
+++ b/configs/evb-px5_defconfig
@@ -19,7 +19,6 @@
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x40000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig
index c8833e6..442f504 100644
--- a/configs/evb-rk3229_defconfig
+++ b/configs/evb-rk3229_defconfig
@@ -17,7 +17,6 @@
CONFIG_DEBUG_UART_BASE=0x11030000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x61800800
-CONFIG_TPL_MAX_SIZE=0x100000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x61100000
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index 251cc3f..2782a39 100644
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -16,7 +16,6 @@
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x40000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
diff --git a/configs/firefly-px30_defconfig b/configs/firefly-px30_defconfig
index 4bc2031..1717eb2 100644
--- a/configs/firefly-px30_defconfig
+++ b/configs/firefly-px30_defconfig
@@ -18,7 +18,6 @@
CONFIG_DEBUG_UART_BASE=0xFF160000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000
diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig
index 5f7c5a0..33cd0c3 100644
--- a/configs/lion-rk3368_defconfig
+++ b/configs/lion-rk3368_defconfig
@@ -18,7 +18,6 @@
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x40000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
index 4dfb778..86f5e11 100644
--- a/configs/nanopi-r2s-rk3328_defconfig
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -16,7 +16,6 @@
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x40000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
index f8e4322..c0c0c4d 100644
--- a/configs/odroid-go2_defconfig
+++ b/configs/odroid-go2_defconfig
@@ -20,7 +20,6 @@
CONFIG_DEBUG_UART_BASE=0xFF160000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000
diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
index 625460b..2fb8bd8 100644
--- a/configs/px30-core-ctouch2-of10-px30_defconfig
+++ b/configs/px30-core-ctouch2-of10-px30_defconfig
@@ -18,7 +18,6 @@
CONFIG_DEBUG_UART_BASE=0xFF160000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000
diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig
index bca4698..76f81ae 100644
--- a/configs/px30-core-ctouch2-px30_defconfig
+++ b/configs/px30-core-ctouch2-px30_defconfig
@@ -18,7 +18,6 @@
CONFIG_DEBUG_UART_BASE=0xFF160000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000
diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig
index c13af93..8493500 100644
--- a/configs/px30-core-edimm2.2-px30_defconfig
+++ b/configs/px30-core-edimm2.2-px30_defconfig
@@ -18,7 +18,6 @@
CONFIG_DEBUG_UART_BASE=0xFF160000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x20000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000
diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
index 8e2e530..8ba5034 100644
--- a/configs/roc-cc-rk3328_defconfig
+++ b/configs/roc-cc-rk3328_defconfig
@@ -16,7 +16,6 @@
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x40000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig
index 9831670..fb5eac3 100644
--- a/configs/rock-pi-e-rk3328_defconfig
+++ b/configs/rock-pi-e-rk3328_defconfig
@@ -17,7 +17,6 @@
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x40000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 9ca6f3a..b055dd0 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -16,7 +16,6 @@
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_TPL_MAX_SIZE=0x40000
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
diff --git a/doc/develop/release_cycle.rst b/doc/develop/release_cycle.rst
index 7d8a610..0bca301 100644
--- a/doc/develop/release_cycle.rst
+++ b/doc/develop/release_cycle.rst
@@ -48,11 +48,12 @@
Current Status
--------------
-* U-Boot v2022.07 was released on Mon 11 July 2022.
+* U-Boot v2022.10 was released on Mon 03 October 2022.
-* The Merge Window for the next release (v2022.10) is **closed**.
+* The Merge Window for the next release (v2023.01) is **open** until -rc1
+ release on Mon 24 October 2022.
-* Release "v2022.10" is scheduled for 03 Oct 2022.
+* Release "v2023.01" is scheduled for 09 January 2023.
Future Releases
---------------
@@ -60,29 +61,31 @@
.. The following commented out dates are for when release candidates are
planned to be tagged.
-For the next scheduled release, release candidates were made on::
+.. For the next scheduled release, release candidates were made on::
-* U-Boot v2022.10-rc1 was released on Mon 25 July 2022.
+.. * U-Boot v2023.01-rc1 was released on Mon 24 October 2022.
-* U-Boot v2022.10-rc2 was released on Mon 08 August 2022.
+.. * U-Boot v2023.01-rc2 was released on Mon 07 November 2022.
-* U-Boot v2022.10-rc3 was released on Mon 22 August 2022.
+.. * U-Boot v2023.01-rc3 was released on Mon 21 November 2022.
-* U-Boot v2022.10-rc4 was released on Mon 05 September 2022.
+.. * U-Boot v2023.01-rc4 was released on Mon 05 December 2022.
-* U-Boot v2022.10-rc5 was released on Mon 19 September 2022.
+.. * U-Boot v2023.01-rc5 was released on Mon 19 December 2022.
+
+.. * U-Boot v2023.01-rc6 was released on Mon 02 January 2023.
Please note that the following dates are planned only and may be deviated from
as needed.
-* "v2022.10": end of MW = Mon, Jul 25, 2022; release = Mon, Oct 03, 2022
-
* "v2023.01": end of MW = Mon, Oct 24, 2022; release = Mon, Jan 09, 2023
* "v2023.04": end of MW = Mon, Jan 30, 2022; release = Mon, Apr 03, 2023
* "v2023.07": end of MW = Mon, Apr 24, 2023; release = Mon, Jul 03, 2023
+* "v2023.10": end of MW = Mon, Jul 24, 2023; release = Mon, Oct 02, 2023
+
Previous Releases
-----------------
@@ -90,6 +93,8 @@
<https://source.denx.de/u-boot/gitdm>`_, which was originally created by
Jonathan Corbet.
+* :doc:`statistics/u-boot-stats-v2022.10` which was released on 03 October 2022.
+
* :doc:`statistics/u-boot-stats-v2022.07` which was released on 11 July 2022.
* :doc:`statistics/u-boot-stats-v2022.04` which was released on 04 April 2022.
diff --git a/doc/develop/statistics/u-boot-stats-v2022.10.rst b/doc/develop/statistics/u-boot-stats-v2022.10.rst
new file mode 100644
index 0000000..0693d68
--- /dev/null
+++ b/doc/develop/statistics/u-boot-stats-v2022.10.rst
@@ -0,0 +1,727 @@
+:orphan:
+
+Release Statistics for U-Boot v2022.10
+======================================
+
+* Processed 1521 csets from 151 developers
+
+* 25 employers found
+
+* A total of 162770 lines added, 76810 removed (delta 85960)
+
+.. table:: Developers with the most changesets
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Tom Rini 265 (17.4%)
+ Pali Rohár 133 (8.7%)
+ Simon Glass 110 (7.2%)
+ Heinrich Schuchardt 58 (3.8%)
+ Patrick Delaunay 56 (3.7%)
+ Peng Fan 55 (3.6%)
+ Michal Simek 51 (3.4%)
+ Sean Anderson 50 (3.3%)
+ Stefan Herbrechtsmeier 41 (2.7%)
+ Marcel Ziswiler 31 (2.0%)
+ Michael Walle 31 (2.0%)
+ Joel Stanley 28 (1.8%)
+ Weijie Gao 26 (1.7%)
+ Andrew Scull 25 (1.6%)
+ Marek Vasut 24 (1.6%)
+ Quentin Schulz 23 (1.5%)
+ Etienne Carriere 20 (1.3%)
+ Michael Trimarchi 17 (1.1%)
+ Rasmus Villemoes 17 (1.1%)
+ Ovidiu Panait 17 (1.1%)
+ Ashok Reddy Soma 15 (1.0%)
+ Oleksandr Suvorov 14 (0.9%)
+ Ye Li 14 (0.9%)
+ Samuel Holland 14 (0.9%)
+ Andrew Davis 13 (0.9%)
+ T Karthik Reddy 13 (0.9%)
+ Jim Liu 12 (0.8%)
+ Chris Packham 12 (0.8%)
+ Alper Nebi Yasak 12 (0.8%)
+ Vaishnav Achath 12 (0.8%)
+ Fabio Estevam 10 (0.7%)
+ Sumit Garg 9 (0.6%)
+ Nick Hawkins 9 (0.6%)
+ Andre Przywara 8 (0.5%)
+ Marek Behún 8 (0.5%)
+ Jesse Taube 8 (0.5%)
+ Patrice Chotard 7 (0.5%)
+ Francesco Dolcini 7 (0.5%)
+ Sughosh Ganu 7 (0.5%)
+ Mamta Shukla 7 (0.5%)
+ Stefan Roese 6 (0.4%)
+ Tim Harvey 6 (0.4%)
+ Masahisa Kojima 6 (0.4%)
+ Eugen Hristev 6 (0.4%)
+ Suman Anna 6 (0.4%)
+ Nishanth Menon 5 (0.3%)
+ Heiko Thiery 5 (0.3%)
+ Vignesh Raghavendra 5 (0.3%)
+ Philippe Schenker 5 (0.3%)
+ Robert Marko 5 (0.3%)
+ Rui Miguel Silva 5 (0.3%)
+ Georgi Vlaev 5 (0.3%)
+ Aswath Govindraju 5 (0.3%)
+ Loic Poulain 5 (0.3%)
+ Pierre-Clément Tosi 4 (0.3%)
+ Michal Suchanek 4 (0.3%)
+ Philip Oberfichtner 4 (0.3%)
+ JaimeLiao 4 (0.3%)
+ Angus Ainslie 3 (0.2%)
+ Tony Dinh 3 (0.2%)
+ Alain Volmat 3 (0.2%)
+ Icenowy Zheng 3 (0.2%)
+ John Keeping 3 (0.2%)
+ Lee Jones 3 (0.2%)
+ Geert Uytterhoeven 3 (0.2%)
+ Paul Barker 3 (0.2%)
+ Nikita Shubin 3 (0.2%)
+ Kunihiko Hayashi 3 (0.2%)
+ Ying-Chun Liu (PaulLiu) 3 (0.2%)
+ Alice Guo 3 (0.2%)
+ Julien Panis 3 (0.2%)
+ Sergiu Moga 3 (0.2%)
+ Anthoine Bourgeois 3 (0.2%)
+ Derald D. Woods 3 (0.2%)
+ Johannes Schneider 2 (0.1%)
+ Denys Drozdov 2 (0.1%)
+ Gaurav Jain 2 (0.1%)
+ Jorge Ramirez-Ortiz 2 (0.1%)
+ Jose Marinho 2 (0.1%)
+ Daniel Golle 2 (0.1%)
+ Matwey V. Kornilov 2 (0.1%)
+ Neil Armstrong 2 (0.1%)
+ Kory Maincent 2 (0.1%)
+ Dmytro Firsov 2 (0.1%)
+ Chia-Wei Wang 2 (0.1%)
+ Alexander Dahl 2 (0.1%)
+ Matt Ranostay 2 (0.1%)
+ Janne Grunau 2 (0.1%)
+ Eddie James 2 (0.1%)
+ Jan Kiszka 2 (0.1%)
+ Ilias Apalodimas 1 (0.1%)
+ Miaoqian Lin 1 (0.1%)
+ Pankaj Raghav 1 (0.1%)
+ Alison Huffman 1 (0.1%)
+ Adam Ford 1 (0.1%)
+ Michal Vasilek 1 (0.1%)
+ Leo Yu-Chi Liang 1 (0.1%)
+ Siarhei Yasinski 1 (0.1%)
+ Ramon Fried 1 (0.1%)
+ Jessica Clarke 1 (0.1%)
+ Johan Jonker 1 (0.1%)
+ Han Pengfei 1 (0.1%)
+ qianfan Zhao 1 (0.1%)
+ Mark Kettenis 1 (0.1%)
+ Roger Knecht 1 (0.1%)
+ Dario Binacchi 1 (0.1%)
+ Sergei Antonov 1 (0.1%)
+ Hector Martin 1 (0.1%)
+ Holger Brunck 1 (0.1%)
+ Dhananjay Phadke 1 (0.1%)
+ Billy Tsai 1 (0.1%)
+ AKASHI Takahiro 1 (0.1%)
+ Camelia Groza 1 (0.1%)
+ Joao Marcos Costa 1 (0.1%)
+ Milan P. Stanić 1 (0.1%)
+ Zev Weiss 1 (0.1%)
+ Christophe Leroy 1 (0.1%)
+ Andre Kalb 1 (0.1%)
+ Jerome Brunet 1 (0.1%)
+ Harald Seiler 1 (0.1%)
+ Vyacheslav Bocharov 1 (0.1%)
+ Martin Bonner 1 (0.1%)
+ Konstantin Porotchkin 1 (0.1%)
+ Jian Li 1 (0.1%)
+ Martyn Welch 1 (0.1%)
+ Jun Nie 1 (0.1%)
+ Douglas Anderson 1 (0.1%)
+ Siva Durga Prasad Paladugu 1 (0.1%)
+ Adrian Fiergolski 1 (0.1%)
+ Ayan Kumar Halder 1 (0.1%)
+ Yogesh Siraswar 1 (0.1%)
+ Stephan Gerhold 1 (0.1%)
+ Anand Gadiyar 1 (0.1%)
+ Ramin Zaghi 1 (0.1%)
+ Josua Mayer 1 (0.1%)
+ Paul Doelle 1 (0.1%)
+ Philippe Boos 1 (0.1%)
+ Vincent Stehlé 1 (0.1%)
+ Jae Hyun Yoo 1 (0.1%)
+ Markus Hoffrogge 1 (0.1%)
+ Johann Neuhauser 1 (0.1%)
+ Lionel Debieve 1 (0.1%)
+ Ralph Siemsen 1 (0.1%)
+ Rafał Miłecki 1 (0.1%)
+ Rogier Stam 1 (0.1%)
+ Bryan Brattlof 1 (0.1%)
+ Mihai Sain 1 (0.1%)
+ Amit Kumar Mahapatra 1 (0.1%)
+ Alison Wang 1 (0.1%)
+ William Zhang 1 (0.1%)
+ Judy Wang 1 (0.1%)
+ ==================================== =====
+
+
+.. table:: Developers with the most changed lines
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Tom Rini 98915 (47.3%)
+ Marcel Ziswiler 19704 (9.4%)
+ Peng Fan 8817 (4.2%)
+ Simon Glass 7600 (3.6%)
+ Stefan Herbrechtsmeier 6191 (3.0%)
+ Jim Liu 6080 (2.9%)
+ Weijie Gao 5883 (2.8%)
+ Angus Ainslie 5426 (2.6%)
+ Rui Miguel Silva 4502 (2.2%)
+ Pali Rohár 4121 (2.0%)
+ Patrick Delaunay 3695 (1.8%)
+ Jesse Taube 2771 (1.3%)
+ Ye Li 2675 (1.3%)
+ Nishanth Menon 2621 (1.3%)
+ Marek Vasut 2401 (1.1%)
+ Michal Simek 2303 (1.1%)
+ Sean Anderson 2264 (1.1%)
+ Suman Anna 1842 (0.9%)
+ Sumit Garg 1431 (0.7%)
+ Michael Trimarchi 1353 (0.6%)
+ Andrew Scull 1093 (0.5%)
+ Holger Brunck 1089 (0.5%)
+ Heinrich Schuchardt 969 (0.5%)
+ Ovidiu Panait 895 (0.4%)
+ Nick Hawkins 883 (0.4%)
+ Etienne Carriere 858 (0.4%)
+ T Karthik Reddy 778 (0.4%)
+ Fabio Estevam 655 (0.3%)
+ Samuel Holland 619 (0.3%)
+ Vignesh Raghavendra 586 (0.3%)
+ Michael Walle 509 (0.2%)
+ Alper Nebi Yasak 420 (0.2%)
+ Andrew Davis 395 (0.2%)
+ Anthoine Bourgeois 394 (0.2%)
+ Mamta Shukla 376 (0.2%)
+ Loic Poulain 364 (0.2%)
+ Francesco Dolcini 360 (0.2%)
+ Robert Marko 350 (0.2%)
+ Quentin Schulz 337 (0.2%)
+ Joel Stanley 318 (0.2%)
+ William Zhang 315 (0.2%)
+ Philip Oberfichtner 302 (0.1%)
+ Chris Packham 297 (0.1%)
+ Vaishnav Achath 285 (0.1%)
+ Ashok Reddy Soma 235 (0.1%)
+ Milan P. Stanić 230 (0.1%)
+ Rasmus Villemoes 211 (0.1%)
+ Oleksandr Suvorov 200 (0.1%)
+ Sughosh Ganu 199 (0.1%)
+ Ramon Fried 183 (0.1%)
+ Andre Przywara 182 (0.1%)
+ Stefan Roese 178 (0.1%)
+ JaimeLiao 176 (0.1%)
+ Tim Harvey 163 (0.1%)
+ Philippe Boos 146 (0.1%)
+ Eugen Hristev 143 (0.1%)
+ Icenowy Zheng 143 (0.1%)
+ Neil Armstrong 134 (0.1%)
+ Chia-Wei Wang 132 (0.1%)
+ Matwey V. Kornilov 131 (0.1%)
+ Philippe Schenker 127 (0.1%)
+ Jose Marinho 111 (0.1%)
+ Alice Guo 110 (0.1%)
+ Tony Dinh 109 (0.1%)
+ Christophe Leroy 104 (0.0%)
+ Paul Doelle 90 (0.0%)
+ Michal Suchanek 79 (0.0%)
+ Geert Uytterhoeven 71 (0.0%)
+ Georgi Vlaev 69 (0.0%)
+ Gaurav Jain 68 (0.0%)
+ Rafał Miłecki 67 (0.0%)
+ Marek Behún 66 (0.0%)
+ Ying-Chun Liu (PaulLiu) 62 (0.0%)
+ Matt Ranostay 61 (0.0%)
+ Camelia Groza 55 (0.0%)
+ Dhananjay Phadke 51 (0.0%)
+ Patrice Chotard 50 (0.0%)
+ Masahisa Kojima 47 (0.0%)
+ Lionel Debieve 47 (0.0%)
+ Julien Panis 45 (0.0%)
+ Heiko Thiery 43 (0.0%)
+ Aswath Govindraju 40 (0.0%)
+ Sergiu Moga 40 (0.0%)
+ Dmytro Firsov 36 (0.0%)
+ Eddie James 34 (0.0%)
+ Kory Maincent 32 (0.0%)
+ Ayan Kumar Halder 30 (0.0%)
+ Jan Kiszka 28 (0.0%)
+ Lee Jones 26 (0.0%)
+ Martin Bonner 26 (0.0%)
+ Pierre-Clément Tosi 24 (0.0%)
+ Paul Barker 23 (0.0%)
+ Alexander Dahl 21 (0.0%)
+ John Keeping 20 (0.0%)
+ Janne Grunau 20 (0.0%)
+ Hector Martin 20 (0.0%)
+ Jian Li 20 (0.0%)
+ Douglas Anderson 19 (0.0%)
+ Yogesh Siraswar 19 (0.0%)
+ Kunihiko Hayashi 18 (0.0%)
+ Daniel Golle 15 (0.0%)
+ Harald Seiler 15 (0.0%)
+ Adrian Fiergolski 15 (0.0%)
+ Derald D. Woods 14 (0.0%)
+ Johannes Schneider 14 (0.0%)
+ Leo Yu-Chi Liang 14 (0.0%)
+ Jessica Clarke 14 (0.0%)
+ Stephan Gerhold 14 (0.0%)
+ Alison Wang 14 (0.0%)
+ Siva Durga Prasad Paladugu 12 (0.0%)
+ Josua Mayer 12 (0.0%)
+ Rogier Stam 12 (0.0%)
+ Alain Volmat 11 (0.0%)
+ Nikita Shubin 11 (0.0%)
+ AKASHI Takahiro 11 (0.0%)
+ Bryan Brattlof 11 (0.0%)
+ Andre Kalb 10 (0.0%)
+ Jae Hyun Yoo 10 (0.0%)
+ Jun Nie 9 (0.0%)
+ Judy Wang 9 (0.0%)
+ Johan Jonker 8 (0.0%)
+ Jorge Ramirez-Ortiz 7 (0.0%)
+ Ilias Apalodimas 7 (0.0%)
+ Siarhei Yasinski 7 (0.0%)
+ Dario Binacchi 7 (0.0%)
+ Vyacheslav Bocharov 7 (0.0%)
+ Denys Drozdov 6 (0.0%)
+ Michal Vasilek 6 (0.0%)
+ Jerome Brunet 6 (0.0%)
+ Mihai Sain 6 (0.0%)
+ Vincent Stehlé 5 (0.0%)
+ Miaoqian Lin 4 (0.0%)
+ Adam Ford 4 (0.0%)
+ Alison Huffman 3 (0.0%)
+ Konstantin Porotchkin 3 (0.0%)
+ Ralph Siemsen 3 (0.0%)
+ Pankaj Raghav 2 (0.0%)
+ Han Pengfei 2 (0.0%)
+ Zev Weiss 2 (0.0%)
+ Johann Neuhauser 2 (0.0%)
+ qianfan Zhao 1 (0.0%)
+ Mark Kettenis 1 (0.0%)
+ Roger Knecht 1 (0.0%)
+ Sergei Antonov 1 (0.0%)
+ Billy Tsai 1 (0.0%)
+ Joao Marcos Costa 1 (0.0%)
+ Martyn Welch 1 (0.0%)
+ Anand Gadiyar 1 (0.0%)
+ Ramin Zaghi 1 (0.0%)
+ Markus Hoffrogge 1 (0.0%)
+ Amit Kumar Mahapatra 1 (0.0%)
+ ==================================== =====
+
+
+.. table:: Developers with the most lines removed
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Marek Vasut 1245 (1.6%)
+ Holger Brunck 1086 (1.4%)
+ Chris Packham 213 (0.3%)
+ Samuel Holland 206 (0.3%)
+ Francesco Dolcini 186 (0.2%)
+ Icenowy Zheng 34 (0.0%)
+ Ayan Kumar Halder 30 (0.0%)
+ Eugen Hristev 12 (0.0%)
+ Andre Przywara 11 (0.0%)
+ AKASHI Takahiro 9 (0.0%)
+ Heiko Thiery 7 (0.0%)
+ Alexander Dahl 7 (0.0%)
+ Daniel Golle 6 (0.0%)
+ Bryan Brattlof 6 (0.0%)
+ Denys Drozdov 6 (0.0%)
+ Derald D. Woods 3 (0.0%)
+ Jerome Brunet 3 (0.0%)
+ Alain Volmat 2 (0.0%)
+ Pankaj Raghav 2 (0.0%)
+ Johann Neuhauser 2 (0.0%)
+ Anand Gadiyar 1 (0.0%)
+ ==================================== =====
+
+
+.. table:: Developers with the most signoffs (total 266)
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Michal Simek 81 (30.5%)
+ Peng Fan 41 (15.4%)
+ Andre Przywara 16 (6.0%)
+ Ilias Apalodimas 14 (5.3%)
+ Dario Binacchi 14 (5.3%)
+ Marek Behún 12 (4.5%)
+ Ashok Reddy Soma 11 (4.1%)
+ Vignesh Raghavendra 9 (3.4%)
+ Thomas Haemmerle 7 (2.6%)
+ Ye Li 7 (2.6%)
+ Tom Rini 6 (2.3%)
+ Heinrich Schuchardt 5 (1.9%)
+ Satoru Okamoto 4 (1.5%)
+ Aswath Govindraju 4 (1.5%)
+ Simon Glass 4 (1.5%)
+ Francesco Dolcini 2 (0.8%)
+ Andrejs Cainikovs 2 (0.8%)
+ Dave Gerlach 2 (0.8%)
+ Gowtham Tammana 2 (0.8%)
+ Alper Nebi Yasak 2 (0.8%)
+ T Karthik Reddy 2 (0.8%)
+ Nishanth Menon 2 (0.8%)
+ Samuel Holland 1 (0.4%)
+ Sebastian Krzyszkowiak 1 (0.4%)
+ Masami Hiramatsu 1 (0.4%)
+ Jassi Brar 1 (0.4%)
+ Rick Chen 1 (0.4%)
+ Oliver Brown 1 (0.4%)
+ Yangbo Lu 1 (0.4%)
+ Yann Gautier 1 (0.4%)
+ Kursad Oney 1 (0.4%)
+ Anand Gore 1 (0.4%)
+ Jorge Ramirez-Ortiz 1 (0.4%)
+ Adrian Fiergolski 1 (0.4%)
+ Alice Guo 1 (0.4%)
+ Neil Armstrong 1 (0.4%)
+ Oleksandr Suvorov 1 (0.4%)
+ Joel Stanley 1 (0.4%)
+ Patrick Delaunay 1 (0.4%)
+ ==================================== =====
+
+
+.. table:: Developers with the most reviews (total 704)
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Simon Glass 148 (21.0%)
+ Stefan Roese 123 (17.5%)
+ Patrice Chotard 60 (8.5%)
+ Tom Rini 40 (5.7%)
+ Ramon Fried 28 (4.0%)
+ Fabio Estevam 27 (3.8%)
+ Ilias Apalodimas 20 (2.8%)
+ Heinrich Schuchardt 18 (2.6%)
+ Marek Behún 16 (2.3%)
+ Heiko Schocher 16 (2.3%)
+ Jaehoon Chung 15 (2.1%)
+ Kever Yang 15 (2.1%)
+ Andre Przywara 12 (1.7%)
+ Patrick Delaunay 11 (1.6%)
+ Daniel Schwierzeck 11 (1.6%)
+ Peng Fan 9 (1.3%)
+ Jagan Teki 9 (1.3%)
+ ryan_chen 8 (1.1%)
+ Leo Yu-Chi Liang 8 (1.1%)
+ Pali Rohár 8 (1.1%)
+ Alper Nebi Yasak 7 (1.0%)
+ Cédric Le Goater 7 (1.0%)
+ Marek Vasut 6 (0.9%)
+ Chia-Wei Wang 6 (0.9%)
+ Francesco Dolcini 5 (0.7%)
+ Bin Meng 4 (0.6%)
+ Minkyu Kang 4 (0.6%)
+ Sean Anderson 4 (0.6%)
+ Anastasiia Lukianenko 3 (0.4%)
+ Andrey Zhizhikin 3 (0.4%)
+ Tudor Ambarus 3 (0.4%)
+ Michael Trimarchi 3 (0.4%)
+ Neil Armstrong 2 (0.3%)
+ Mark Kettenis 2 (0.3%)
+ Qu Wenruo 2 (0.3%)
+ Frieder Schrempf 2 (0.3%)
+ Grzegorz Szymaszek 2 (0.3%)
+ Xavier Drudis Ferran 2 (0.3%)
+ Artem Lapkin 2 (0.3%)
+ Vladimir Oltean 2 (0.3%)
+ Michael Walle 2 (0.3%)
+ Ye Li 1 (0.1%)
+ Dave Gerlach 1 (0.1%)
+ Nishanth Menon 1 (0.1%)
+ Rick Chen 1 (0.1%)
+ Joel Stanley 1 (0.1%)
+ Holger Brunck 1 (0.1%)
+ Chris Packham 1 (0.1%)
+ Heiko Thiery 1 (0.1%)
+ Bryan Brattlof 1 (0.1%)
+ Jerome Brunet 1 (0.1%)
+ Alain Volmat 1 (0.1%)
+ Philipp Tomsich 1 (0.1%)
+ Jonathan Gray 1 (0.1%)
+ Huang Jianan 1 (0.1%)
+ Anup Patel 1 (0.1%)
+ Igal Liberman 1 (0.1%)
+ Baruch Siach 1 (0.1%)
+ Miquel Raynal 1 (0.1%)
+ Mattijs Korpershoek 1 (0.1%)
+ Pratyush Yadav 1 (0.1%)
+ Neal Liu 1 (0.1%)
+ Ariel D'Alessandro 1 (0.1%)
+ Philippe Reynes 1 (0.1%)
+ Anand Jain 1 (0.1%)
+ Billy Tsai 1 (0.1%)
+ Kory Maincent 1 (0.1%)
+ John Keeping 1 (0.1%)
+ Etienne Carriere 1 (0.1%)
+ Sumit Garg 1 (0.1%)
+ ==================================== =====
+
+
+.. table:: Developers with the most test credits (total 72)
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Adrian Fiergolski 12 (16.7%)
+ Ricardo Salveti 12 (16.7%)
+ Adam Ford 9 (12.5%)
+ Marek Vasut 5 (6.9%)
+ Xavier Drudis Ferran 5 (6.9%)
+ Stefan Roese 3 (4.2%)
+ Artem Lapkin 3 (4.2%)
+ Tim Harvey 3 (4.2%)
+ Patrick Delaunay 2 (2.8%)
+ Frieder Schrempf 2 (2.8%)
+ Teresa Remmet 2 (2.8%)
+ Tony Dinh 2 (2.8%)
+ Heinrich Schuchardt 1 (1.4%)
+ Alper Nebi Yasak 1 (1.4%)
+ Mark Kettenis 1 (1.4%)
+ Heiko Thiery 1 (1.4%)
+ Ariel D'Alessandro 1 (1.4%)
+ Etienne Carriere 1 (1.4%)
+ Peter Hoyes 1 (1.4%)
+ Paweł Anikiel 1 (1.4%)
+ Sergiu Moga 1 (1.4%)
+ Michal Suchanek 1 (1.4%)
+ Georgi Vlaev 1 (1.4%)
+ Ovidiu Panait 1 (1.4%)
+ ==================================== =====
+
+
+.. table:: Developers who gave the most tested-by credits (total 72)
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Oleksandr Suvorov 23 (31.9%)
+ Peng Fan 11 (15.3%)
+ Mamta Shukla 7 (9.7%)
+ Pali Rohár 5 (6.9%)
+ Quentin Schulz 5 (6.9%)
+ Lee Jones 4 (5.6%)
+ Philip Oberfichtner 3 (4.2%)
+ Patrick Delaunay 2 (2.8%)
+ Adrian Fiergolski 1 (1.4%)
+ Stefan Roese 1 (1.4%)
+ Heinrich Schuchardt 1 (1.4%)
+ Andre Przywara 1 (1.4%)
+ Sean Anderson 1 (1.4%)
+ Alain Volmat 1 (1.4%)
+ Michal Simek 1 (1.4%)
+ Vignesh Raghavendra 1 (1.4%)
+ Jorge Ramirez-Ortiz 1 (1.4%)
+ Eugen Hristev 1 (1.4%)
+ Hector Martin 1 (1.4%)
+ Sughosh Ganu 1 (1.4%)
+ ==================================== =====
+
+
+.. table:: Developers with the most report credits (total 24)
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Pali Rohár 4 (16.7%)
+ Tom Rini 2 (8.3%)
+ Heinrich Schuchardt 1 (4.2%)
+ Jorge Ramirez-Ortiz 1 (4.2%)
+ Heiko Thiery 1 (4.2%)
+ Etienne Carriere 1 (4.2%)
+ Sergiu Moga 1 (4.2%)
+ Ovidiu Panait 1 (4.2%)
+ Marek Behún 1 (4.2%)
+ Johan Jonker 1 (4.2%)
+ Sergei Antonov 1 (4.2%)
+ Jason Kridner 1 (4.2%)
+ Bin Liu 1 (4.2%)
+ George Hilliard 1 (4.2%)
+ Gatien CHEVALLIER 1 (4.2%)
+ Andrew Walbran 1 (4.2%)
+ Gan, Yau Wai" 1 (4.2%)
+ Michal Vasilek 1 (4.2%)
+ Jan Kiszka 1 (4.2%)
+ Jesse Taube 1 (4.2%)
+ ==================================== =====
+
+
+.. table:: Developers who gave the most report credits (total 24)
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Tom Rini 4 (16.7%)
+ Heinrich Schuchardt 3 (12.5%)
+ Simon Glass 3 (12.5%)
+ Pali Rohár 2 (8.3%)
+ Andre Przywara 2 (8.3%)
+ Peng Fan 1 (4.2%)
+ Quentin Schulz 1 (4.2%)
+ Patrick Delaunay 1 (4.2%)
+ Alain Volmat 1 (4.2%)
+ Michal Simek 1 (4.2%)
+ Eugen Hristev 1 (4.2%)
+ Fabio Estevam 1 (4.2%)
+ Nishanth Menon 1 (4.2%)
+ Anand Gadiyar 1 (4.2%)
+ Pierre-Clément Tosi 1 (4.2%)
+ ==================================== =====
+
+
+.. table:: Top changeset contributors by employer
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ (Unknown) 590 (38.8%)
+ Konsulko Group 265 (17.4%)
+ Google, Inc. 141 (9.3%)
+ NXP 77 (5.1%)
+ ST Microelectronics 67 (4.4%)
+ Linaro 60 (3.9%)
+ Texas Instruments 56 (3.7%)
+ AMD 53 (3.5%)
+ DENX Software Engineering 45 (3.0%)
+ Toradex 45 (3.0%)
+ Weidmüller Interface GmbH & Co. KG 41 (2.7%)
+ Xilinx 29 (1.9%)
+ Amarula Solutions 18 (1.2%)
+ ARM 11 (0.7%)
+ BayLibre SAS 5 (0.3%)
+ SUSE 4 (0.3%)
+ Socionext Inc. 3 (0.2%)
+ Bootlin 2 (0.1%)
+ IBM 2 (0.1%)
+ Siemens 2 (0.1%)
+ Broadcom 1 (0.1%)
+ Collabora Ltd. 1 (0.1%)
+ Debian.org 1 (0.1%)
+ Marvell 1 (0.1%)
+ Samsung 1 (0.1%)
+ ==================================== =====
+
+
+.. table:: Top lines changed by employer
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ Konsulko Group 98915 (47.3%)
+ (Unknown) 36773 (17.6%)
+ Toradex 20197 (9.7%)
+ NXP 11759 (5.6%)
+ Google, Inc. 8739 (4.2%)
+ Linaro 7623 (3.6%)
+ Weidmüller Interface GmbH & Co. KG 6191 (3.0%)
+ Texas Instruments 5930 (2.8%)
+ ST Microelectronics 3803 (1.8%)
+ DENX Software Engineering 3551 (1.7%)
+ AMD 2343 (1.1%)
+ Amarula Solutions 1360 (0.7%)
+ Xilinx 1016 (0.5%)
+ Broadcom 315 (0.2%)
+ ARM 298 (0.1%)
+ BayLibre SAS 197 (0.1%)
+ SUSE 79 (0.0%)
+ IBM 34 (0.0%)
+ Bootlin 32 (0.0%)
+ Siemens 28 (0.0%)
+ Socionext Inc. 18 (0.0%)
+ Debian.org 4 (0.0%)
+ Marvell 3 (0.0%)
+ Samsung 2 (0.0%)
+ Collabora Ltd. 1 (0.0%)
+ ==================================== =====
+
+
+.. table:: Employers with the most signoffs (total 266)
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ AMD 81 (30.5%)
+ NXP 51 (19.2%)
+ (Unknown) 33 (12.4%)
+ Texas Instruments 19 (7.1%)
+ Linaro 16 (6.0%)
+ ARM 16 (6.0%)
+ Amarula Solutions 14 (5.3%)
+ Xilinx 13 (4.9%)
+ Konsulko Group 6 (2.3%)
+ Toradex 4 (1.5%)
+ Google, Inc. 4 (1.5%)
+ Socionext Inc. 4 (1.5%)
+ ST Microelectronics 2 (0.8%)
+ Broadcom 2 (0.8%)
+ BayLibre SAS 1 (0.4%)
+ ==================================== =====
+
+
+.. table:: Employers with the most hackers (total 153)
+ :widths: auto
+
+ ==================================== =====
+ Name Count
+ ==================================== =====
+ (Unknown) 78 (51.0%)
+ Linaro 12 (7.8%)
+ Texas Instruments 11 (7.2%)
+ NXP 7 (4.6%)
+ Google, Inc. 5 (3.3%)
+ DENX Software Engineering 5 (3.3%)
+ Xilinx 4 (2.6%)
+ Toradex 4 (2.6%)
+ ST Microelectronics 4 (2.6%)
+ AMD 3 (2.0%)
+ ARM 3 (2.0%)
+ BayLibre SAS 3 (2.0%)
+ Amarula Solutions 2 (1.3%)
+ Konsulko Group 1 (0.7%)
+ Socionext Inc. 1 (0.7%)
+ Broadcom 1 (0.7%)
+ Weidmüller Interface GmbH & Co. KG 1 (0.7%)
+ SUSE 1 (0.7%)
+ IBM 1 (0.7%)
+ Bootlin 1 (0.7%)
+ Siemens 1 (0.7%)
+ Debian.org 1 (0.7%)
+ Marvell 1 (0.7%)
+ Samsung 1 (0.7%)
+ Collabora Ltd. 1 (0.7%)
+ ==================================== =====
diff --git a/doc/usage/environment.rst b/doc/usage/environment.rst
index 561076b..7906ace 100644
--- a/doc/usage/environment.rst
+++ b/doc/usage/environment.rst
@@ -106,6 +106,27 @@
This is most-likely not complete:
+autostart
+ If set to "yes" (actually any string starting with 1, y, Y, t, or T) an
+ image loaded with one of the commands listed below will be automatically
+ started by internally invoking the bootm command.
+
+ * bootelf - Boot from an ELF image in memory
+ * bootp - boot image via network using BOOTP/TFTP protocol
+ * dhcp - boot image via network using DHCP/TFTP protocol
+ * diskboot - boot from ide device
+ * nboot - boot from NAND device
+ * nfs - boot image via network using NFS protocol
+ * rarpboot - boot image via network using RARP/TFTP protocol
+ * scsiboot - boot from SCSI device
+ * tftpboot - boot image via network using TFTP protocol
+ * usbboot - boot from USB device
+
+ If the environment variable autostart is not set to a value starting with
+ 1, y, Y, t, or T, an image passed to the "bootm" command will be copied to
+ the load address (and eventually uncompressed), but NOT be started.
+ This can be used to load and uncompress arbitrary data.
+
baudrate
Used to set the baudrate of the UART - it defaults to CONFIG_BAUDRATE (which
defaults to 115200).
@@ -174,19 +195,6 @@
configuration from the BOOTP server, but not try to
load any image.
-autostart
- if set to "yes", an image loaded using the "bootp", "dhcp",
- "rarpboot", "tftpboot" or "diskboot" commands will
- be automatically started (by internally calling
- "bootm")
-
- If unset, or set to "1"/"yes"/"true" (case insensitive, just the first
- character is enough), a standalone image
- passed to the "bootm" command will be copied to the load address
- (and eventually uncompressed), but NOT be started.
- This can be used to load and uncompress arbitrary
- data.
-
fdt_high
if set this restricts the maximum address that the
flattened device tree will be copied into upon boot.
diff --git a/drivers/gpio/turris_omnia_mcu.c b/drivers/gpio/turris_omnia_mcu.c
index 986ccde..2d2bf2d 100644
--- a/drivers/gpio/turris_omnia_mcu.c
+++ b/drivers/gpio/turris_omnia_mcu.c
@@ -16,6 +16,8 @@
/* available if FEAT_EXT_CMDS bit is set in features */
CMD_GET_EXT_STATUS_DWORD = 0x11,
+
+ /* available if FEAT_EXT_CMDS and FEAT_PERIPH_MCU bits are set in featurs */
CMD_EXT_CONTROL = 0x12,
CMD_GET_EXT_CONTROL_STATUS = 0x13,
};
@@ -54,6 +56,7 @@
/* CMD_GET_FEATURES */
enum features_e {
+ FEAT_PERIPH_MCU = BIT(0),
FEAT_EXT_CMDS = BIT(1),
};
@@ -84,10 +87,12 @@
return -EINVAL;
return GPIOF_INPUT;
- /* bank 2 - supported only when FEAT_EXT_CMDS is set */
+ /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
case (16 + 32 + 0) ... (16 + 32 + 15):
if (!(info->features & FEAT_EXT_CMDS))
return -EINVAL;
+ if (!(info->features & FEAT_PERIPH_MCU))
+ return -EINVAL;
return GPIOF_OUTPUT;
default:
@@ -120,10 +125,12 @@
return ((((u32)val32[3] << 24) | ((u32)val32[2] << 16) |
((u32)val32[1] << 8) | val32[0]) >> (offset - 16)) & 0x1;
- /* bank 2 - supported only when FEAT_EXT_CMDS is set */
+ /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
case (16 + 32 + 0) ... (16 + 32 + 15):
if (!(info->features & FEAT_EXT_CMDS))
return -EINVAL;
+ if (!(info->features & FEAT_PERIPH_MCU))
+ return -EINVAL;
ret = dm_i2c_read(dev, CMD_GET_EXT_CONTROL_STATUS, val16, 2);
if (ret)
return ret;
@@ -162,10 +169,12 @@
val16[0] = value ? val16[1] : 0;
return dm_i2c_write(dev, CMD_GENERAL_CONTROL, val16, sizeof(val16));
- /* bank 2 - supported only when FEAT_EXT_CMDS is set */
+ /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
case (16 + 32 + 0) ... (16 + 32 + 15):
if (!(info->features & FEAT_EXT_CMDS))
return -EINVAL;
+ if (!(info->features & FEAT_PERIPH_MCU))
+ return -EINVAL;
val32[3] = BIT(offset - 16 - 32) >> 8;
val32[2] = BIT(offset - 16 - 32) & 0xff;
val32[1] = value ? val32[3] : 0;
@@ -282,8 +291,10 @@
uc_priv->bank_name = "mcu_";
- if (info->features & FEAT_EXT_CMDS)
+ if ((info->features & FEAT_EXT_CMDS) && (info->features & FEAT_PERIPH_MCU))
uc_priv->gpio_count = 16 + 32 + 16;
+ else if (info->features & FEAT_EXT_CMDS)
+ uc_priv->gpio_count = 16 + 32;
else
uc_priv->gpio_count = 16;
diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
index f17009a..1c34b75 100644
--- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
+++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
@@ -890,7 +890,7 @@
static int dwc2_udc_get_status(struct dwc2_udc *dev,
struct usb_ctrlrequest *crq)
{
- u8 ep_num = crq->wIndex & 0x7F;
+ u8 ep_num = crq->wIndex & 0x3;
u16 g_status = 0;
u32 ep_ctrl;
@@ -1418,7 +1418,7 @@
break;
case USB_REQ_CLEAR_FEATURE:
- ep_num = usb_ctrl->wIndex & 0x7f;
+ ep_num = usb_ctrl->wIndex & 0x3;
if (!dwc2_udc_clear_feature(&dev->ep[ep_num].ep))
return;
@@ -1426,7 +1426,7 @@
break;
case USB_REQ_SET_FEATURE:
- ep_num = usb_ctrl->wIndex & 0x7f;
+ ep_num = usb_ctrl->wIndex & 0x3;
if (!dwc2_udc_set_feature(&dev->ep[ep_num].ep))
return;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a0f48f0..1aabe06 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -214,6 +214,14 @@
Enables support for the on-chip EHCI controller on i.MX23 and
i.MX28 SoCs.
+config USB_EHCI_NPCM
+ bool "Support for Nuvoton NPCM on-chip EHCI USB controller"
+ depends on ARCH_NPCM
+ default n
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ Nuvoton NPCM chips.
+
config USB_EHCI_OMAP
bool "Support for OMAP3+ on-chip EHCI USB controller"
depends on ARCH_OMAP2PLUS
@@ -343,6 +351,14 @@
help
Enable support for the da850 USB controller.
+config USB_OHCI_NPCM
+ bool "Support for Nuvoton NPCM on-chip OHCI USB controller"
+ depends on ARCH_NPCM
+ default n
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ Nuvoton NPCM chips.
+
endif # USB_OHCI_HCD
config SYS_USB_OHCI_SLOT_NAME
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 5fdb804..ddc3663 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o
obj-$(CONFIG_USB_OHCI_PCI) += ohci-pci.o
obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
+obj-$(CONFIG_USB_OHCI_NPCM) += ohci-npcm.o
# echi
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
@@ -34,6 +35,7 @@
obj-$(CONFIG_USB_EHCI_MX5) += ehci-mx5.o
obj-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
obj-$(CONFIG_USB_EHCI_MX7) += ehci-mx6.o
+obj-$(CONFIG_USB_EHCI_NPCM) += ehci-npcm.o
obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
diff --git a/drivers/usb/host/ehci-npcm.c b/drivers/usb/host/ehci-npcm.c
new file mode 100644
index 0000000..357a561
--- /dev/null
+++ b/drivers/usb/host/ehci-npcm.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Nuvoton Technology Corp.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device_compat.h>
+#include <linux/delay.h>
+#include "ehci.h"
+
+struct npcm_ehci_priv {
+ struct ehci_ctrl ctrl;
+ struct ehci_hccr *hcd;
+ struct phy phy;
+};
+
+static int npcm_ehci_setup_phy(struct udevice *dev, struct phy *phy)
+{
+ int ret;
+
+ if (!phy)
+ return 0;
+
+ ret = generic_phy_get_by_index(dev, 0, phy);
+ if (ret) {
+ if (ret != -ENOENT) {
+ dev_err(dev, "failed to get usb phy\n");
+ return ret;
+ }
+ } else {
+ ret = generic_phy_init(phy);
+ if (ret) {
+ dev_err(dev, "failed to init usb phy\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int npcm_ehci_init(struct udevice *dev)
+{
+ struct npcm_ehci_priv *priv = dev_get_priv(dev);
+ struct reset_ctl reset;
+ int ret;
+
+ ret = reset_get_by_index(dev, 0, &reset);
+ if (ret && ret != -ENOENT && ret != -ENOTSUPP) {
+ dev_err(dev, "failed to get reset\n");
+ return ret;
+ }
+
+ /* reset controller */
+ if (reset_valid(&reset))
+ reset_assert(&reset);
+
+ /* setup phy */
+ ret = npcm_ehci_setup_phy(dev, &priv->phy);
+ if (ret)
+ return ret;
+
+ /* release controller from reset */
+ if (reset_valid(&reset))
+ reset_deassert(&reset);
+
+ return 0;
+}
+
+static int npcm_ehci_probe(struct udevice *dev)
+{
+ struct npcm_ehci_priv *priv = dev_get_priv(dev);
+ struct ehci_hcor *hcor;
+ enum usb_init_type type = dev_get_driver_data(dev);
+ int ret;
+
+ ret = npcm_ehci_init(dev);
+ if (ret)
+ return ret;
+
+ priv->hcd = (struct ehci_hccr *)dev_read_addr_ptr(dev);
+ debug("USB HCD @0x%p\n", priv->hcd);
+ hcor = (struct ehci_hcor *)((uintptr_t)priv->hcd +
+ HC_LENGTH(ehci_readl(&priv->hcd->cr_capbase)));
+
+ return ehci_register(dev, priv->hcd, hcor, NULL, 0, type);
+}
+
+static int npcm_ehci_remove(struct udevice *dev)
+{
+ struct npcm_ehci_priv *priv = dev_get_priv(dev);
+
+ generic_phy_exit(&priv->phy);
+
+ return ehci_deregister(dev);
+}
+
+static const struct udevice_id npcm_ehci_ids[] = {
+ { .compatible = "nuvoton,npcm845-ehci", .data = USB_INIT_HOST },
+ { .compatible = "nuvoton,npcm845-udc", .data = USB_INIT_DEVICE },
+ { .compatible = "nuvoton,npcm750-ehci", .data = USB_INIT_HOST },
+ { .compatible = "nuvoton,npcm750-udc", .data = USB_INIT_DEVICE },
+ { }
+};
+
+U_BOOT_DRIVER(ehci_npcm) = {
+ .name = "ehci_npcm",
+ .id = UCLASS_USB,
+ .of_match = npcm_ehci_ids,
+ .probe = npcm_ehci_probe,
+ .remove = npcm_ehci_remove,
+ .ops = &ehci_usb_ops,
+ .priv_auto = sizeof(struct npcm_ehci_priv),
+ .plat_auto = sizeof(struct usb_plat),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
diff --git a/drivers/usb/host/ohci-npcm.c b/drivers/usb/host/ohci-npcm.c
new file mode 100644
index 0000000..9e1d529
--- /dev/null
+++ b/drivers/usb/host/ohci-npcm.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Nuvoton Technology Corp.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device_compat.h>
+#include <linux/delay.h>
+#include "ohci.h"
+
+struct npcm_ohci_priv {
+ ohci_t ohci;
+ struct phy phy;
+};
+
+static int npcm_ohci_setup_phy(struct udevice *dev, struct phy *phy)
+{
+ int ret;
+
+ if (!phy)
+ return 0;
+
+ ret = generic_phy_get_by_index(dev, 0, phy);
+ if (ret) {
+ if (ret != -ENOENT) {
+ dev_err(dev, "failed to get usb phy\n");
+ return ret;
+ }
+ } else {
+ ret = generic_phy_init(phy);
+ if (ret) {
+ dev_err(dev, "failed to init usb phy\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int npcm_ohci_init(struct udevice *dev)
+{
+ struct npcm_ohci_priv *priv = dev_get_priv(dev);
+ struct reset_ctl reset;
+ int ret;
+
+ ret = reset_get_by_index(dev, 0, &reset);
+ if (ret && ret != -ENOENT && ret != -ENOTSUPP) {
+ dev_err(dev, "failed to get reset\n");
+ return ret;
+ }
+
+ /* reset controller */
+ if (reset_valid(&reset))
+ reset_assert(&reset);
+
+ /* setup phy */
+ ret = npcm_ohci_setup_phy(dev, &priv->phy);
+ if (ret)
+ return ret;
+
+ /* release controller from reset */
+ if (reset_valid(&reset))
+ reset_deassert(&reset);
+
+ return 0;
+}
+
+static int npcm_ohci_probe(struct udevice *dev)
+{
+ struct ohci_regs *regs = dev_read_addr_ptr(dev);
+ int ret;
+
+ ret = npcm_ohci_init(dev);
+ if (ret)
+ return ret;
+
+ return ohci_register(dev, regs);
+}
+
+static int npcm_ohci_remove(struct udevice *dev)
+{
+ struct npcm_ohci_priv *priv = dev_get_priv(dev);
+
+ generic_phy_exit(&priv->phy);
+
+ return ohci_deregister(dev);
+}
+
+static const struct udevice_id npcm_ohci_ids[] = {
+ { .compatible = "nuvoton,npcm845-ohci" },
+ { .compatible = "nuvoton,npcm750-ohci" },
+ { }
+};
+
+U_BOOT_DRIVER(ohci_npcm) = {
+ .name = "ohci_npcm",
+ .id = UCLASS_USB,
+ .of_match = npcm_ohci_ids,
+ .probe = npcm_ohci_probe,
+ .remove = npcm_ohci_remove,
+ .ops = &ohci_usb_ops,
+ .priv_auto = sizeof(struct npcm_ohci_priv),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
diff --git a/drivers/watchdog/gpio_wdt.c b/drivers/watchdog/gpio_wdt.c
index fe06ec8..2920c2c 100644
--- a/drivers/watchdog/gpio_wdt.c
+++ b/drivers/watchdog/gpio_wdt.c
@@ -31,7 +31,7 @@
case HW_ALGO_LEVEL:
/* Pulse */
dm_gpio_set_value(&priv->gpio, 1);
- udelay(1);
+ __udelay(1);
dm_gpio_set_value(&priv->gpio, 0);
break;
}
diff --git a/drivers/watchdog/max6370_wdt.c b/drivers/watchdog/max6370_wdt.c
index e59cbb2..584a4ed 100644
--- a/drivers/watchdog/max6370_wdt.c
+++ b/drivers/watchdog/max6370_wdt.c
@@ -72,7 +72,7 @@
if (dm_gpio_is_valid(&wdt->gpio_wdi)) {
dm_gpio_set_value(&wdt->gpio_wdi, 1);
- udelay(1);
+ __udelay(1);
dm_gpio_set_value(&wdt->gpio_wdi, 0);
} else {
val = readb(wdt->reg);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 8043abc..c80f8e8 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -782,8 +782,6 @@
fs_info->fs_root_tree = RB_ROOT;
cache_tree_init(&fs_info->mapping_tree.cache_tree);
- mutex_init(&fs_info->fs_mutex);
-
return fs_info;
free_all:
btrfs_free_fs_info(fs_info);
diff --git a/lib/efi_loader/efi_load_initrd.c b/lib/efi_loader/efi_load_initrd.c
index c5e6652..3d6044f 100644
--- a/lib/efi_loader/efi_load_initrd.c
+++ b/lib/efi_loader/efi_load_initrd.c
@@ -230,6 +230,9 @@
*/
void efi_initrd_deregister(void)
{
+ if (!efi_initrd_handle)
+ return;
+
efi_delete_handle(efi_initrd_handle);
efi_initrd_handle = NULL;
}
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 908a162..c251e2e 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -192,10 +192,13 @@
&tmp_devnum, &volnum);
if (ret == 2 && devnum == tmp_devnum) {
if (ubi_check_volume_sysfs_name(dirent->d_name,
- volname) == 0)
+ volname) == 0) {
+ closedir(sysfs_ubi);
return volnum;
+ }
}
}
+ closedir(sysfs_ubi);
return -1;
}