commit 2d648e6982e970755e78f9644bbfbe0efef43703
author Samuel Holland <samuel@sholland.org> Wed Apr 27 15:31:26 2022 -0500
committer Andre Przywara <andre.przywara@arm.com> Mon May 23 00:37:51 2022 +0100
tree 2b45f00c46b1b101aa1cf5dbbb27a4454d0eb77d
parent 6f97e028ef8064ab6ecdfb6e18e7d53bd7e44272

ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1

Copy the devicetree source for the A83T SoC and all existing boards
from the Linux v5.18-rc1 tag.

To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2.

As with the other SoCs, updates of note include adding detection GPIO
properties in the USB PHY nodes.

Signed-off-by: Samuel Holland <samuel@sholland.org>

arch/arm/dts/sun8i-a83t-cubietruck-plus.dts

diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
index ecd9ff3..e26af7c 100644
--- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
@@ -60,25 +60,36 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubietruck-plus:blue:usr";
 			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
 		};
 
-		orange {
+		led-1 {
 			label = "cubietruck-plus:orange:usr";
 			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
 		};
 
-		white {
+		led-2 {
 			label = "cubietruck-plus:white:usr";
 			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
 		};
 
-		green {
+		led-3 {
 			label = "cubietruck-plus:green:usr";
 			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
 		};
@@ -90,7 +101,7 @@
 		initial-mode = <1>; /* initialize in HUB mode */
 		disabled-ports = <1>;
 		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-		reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
 		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		refclk-frequency = <19200000>;
 	};
@@ -145,6 +156,18 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	/* GL830 USB-to-SATA bridge here */
 	status = "okay";
@@ -164,6 +187,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -239,6 +272,14 @@
 
 #include "axp81x.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_aldo1 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
@@ -386,11 +427,37 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dcdc1>;
+		vddio-supply = <&reg_sw>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
 &usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
 	status = "okay";
 };
 
 &usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";