Merge branch '2019-05-04-master-imports'
- Remove dead code from davinci
- Migrate CONFIG_SUPPORT_EMMC_BOOT
diff --git a/README b/README
index c65448c..8e93460 100644
--- a/README
+++ b/README
@@ -1120,9 +1120,6 @@
CONFIG_SH_MMCIF_CLK
Define the clock frequency for MMCIF
- CONFIG_SUPPORT_EMMC_BOOT
- Enable some additional features of the eMMC boot partitions.
-
- USB Device Firmware Update (DFU) class support:
CONFIG_DFU_OVER_USB
This enables the USB portion of the DFU USB class
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index df43b1d..6887fe0 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -12,7 +12,6 @@
obj-$(CONFIG_SOC_DM644X) += dm644x.o
obj-$(CONFIG_SOC_DM646X) += dm646x.o
obj-$(CONFIG_SOC_DA850) += da850_pinmux.o
-obj-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c
index aca2f29..f97ad3f 100644
--- a/arch/arm/mach-davinci/cpu.c
+++ b/arch/arm/mach-davinci/cpu.c
@@ -27,25 +27,6 @@
#define PLLC_PLLDIV8 0x170
#define PLLC_PLLDIV9 0x174
-/* SOC-specific pll info */
-#ifdef CONFIG_SOC_DM355
-#define ARM_PLLDIV PLLC_PLLDIV1
-#define DDR_PLLDIV PLLC_PLLDIV1
-#endif
-
-#ifdef CONFIG_SOC_DM644X
-#define ARM_PLLDIV PLLC_PLLDIV2
-#define DSP_PLLDIV PLLC_PLLDIV1
-#define DDR_PLLDIV PLLC_PLLDIV2
-#endif
-
-#ifdef CONFIG_SOC_DM646X
-#define DSP_PLLDIV PLLC_PLLDIV1
-#define ARM_PLLDIV PLLC_PLLDIV2
-#define DDR_PLLDIV PLLC_PLLDIV1
-#endif
-
-#ifdef CONFIG_SOC_DA8XX
unsigned int sysdiv[9] = {
PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5,
PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9
@@ -110,103 +91,6 @@
return 0;
}
-#else /* CONFIG_SOC_DA8XX */
-
-static unsigned pll_div(volatile void *pllbase, unsigned offset)
-{
- u32 div;
-
- div = REG(pllbase + offset);
- return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
-}
-
-static inline unsigned pll_prediv(volatile void *pllbase)
-{
-#ifdef CONFIG_SOC_DM355
- /* this register read seems to fail on pll0 */
- if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
- return 8;
- else
- return pll_div(pllbase, PLLC_PREDIV);
-#elif defined(CONFIG_SOC_DM365)
- return pll_div(pllbase, PLLC_PREDIV);
-#endif
- return 1;
-}
-
-static inline unsigned pll_postdiv(volatile void *pllbase)
-{
-#if defined(CONFIG_SOC_DM355) || defined(CONFIG_SOC_DM365)
- return pll_div(pllbase, PLLC_POSTDIV);
-#elif defined(CONFIG_SOC_DM6446)
- if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
- return pll_div(pllbase, PLLC_POSTDIV);
-#endif
- return 1;
-}
-
-static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
-{
- volatile void *pllbase = (volatile void *) pll_addr;
-#ifdef CONFIG_SOC_DM646X
- unsigned base = CONFIG_REFCLK_FREQ / 1000;
-#else
- unsigned base = CONFIG_SYS_HZ_CLOCK / 1000;
-#endif
-
- /* the PLL might be bypassed */
- if (readl(pllbase + PLLC_PLLCTL) & BIT(0)) {
- base /= pll_prediv(pllbase);
-#if defined(CONFIG_SOC_DM365)
- base *= 2 * (readl(pllbase + PLLC_PLLM) & 0x0ff);
-#else
- base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
-#endif
- base /= pll_postdiv(pllbase);
- }
- return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
-}
-
-#ifdef DAVINCI_DM6467EVM
-unsigned int davinci_arm_clk_get()
-{
- return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000;
-}
-#endif
-
-#if defined(CONFIG_SOC_DM365)
-unsigned int davinci_clk_get(unsigned int div)
-{
- return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, div) * 1000000;
-}
-#endif
-
-int set_cpu_clk_info(void)
-{
- unsigned int pllbase = DAVINCI_PLL_CNTRL0_BASE;
-#if defined(CONFIG_SOC_DM365)
- pllbase = DAVINCI_PLL_CNTRL1_BASE;
-#endif
- gd->bd->bi_arm_freq = pll_sysclk_mhz(pllbase, ARM_PLLDIV);
-
-#ifdef DSP_PLLDIV
- gd->bd->bi_dsp_freq =
- pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV);
-#else
- gd->bd->bi_dsp_freq = 0;
-#endif
-
- pllbase = DAVINCI_PLL_CNTRL1_BASE;
-#if defined(CONFIG_SOC_DM365)
- pllbase = DAVINCI_PLL_CNTRL0_BASE;
-#endif
- gd->bd->bi_ddr_freq = pll_sysclk_mhz(pllbase, DDR_PLLDIV) / 2;
-
- return 0;
-}
-
-#endif /* !CONFIG_SOC_DA8XX */
-
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
deleted file mode 100644
index bc158d9..0000000
--- a/arch/arm/mach-davinci/dm355.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SoC-specific code for tms320dm355 and similar chips
- *
- * Copyright (C) 2009 David Brownell
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x00006001;
-}
-
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_LPSC_I2C);
-
- /* Enable I2C pin Mux */
- REG(PINMUX3) |= (1 << 20) | (1 << 19);
-}
-#endif
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
deleted file mode 100644
index 486b900..0000000
--- a/arch/arm/mach-davinci/dm365.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SoC-specific code for tms320dm365 and similar chips
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-}
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_LPSC_I2C);
-}
-#endif
diff --git a/arch/arm/mach-davinci/dm365_lowlevel.c b/arch/arm/mach-davinci/dm365_lowlevel.c
deleted file mode 100644
index ad83917..0000000
--- a/arch/arm/mach-davinci/dm365_lowlevel.c
+++ /dev/null
@@ -1,459 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SoC-specific lowlevel code for tms320dm365 and similar chips
- * Actually used for booting from NAND with nand_spl.
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- */
-#include <common.h>
-#include <nand.h>
-#include <ns16550.h>
-#include <post.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/dm365_lowlevel.h>
-#include <asm/arch/hardware.h>
-
-void dm365_waitloop(unsigned long loopcnt)
-{
- unsigned long i;
-
- for (i = 0; i < loopcnt; i++)
- asm(" NOP");
-}
-
-int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
-{
- unsigned int clksrc = 0x0;
-
- /* Power up the PLL */
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN);
-
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9);
- setbits_le32(&dv_pll0_regs->pllctl,
- clksrc << PLLCTL_CLOCK_MODE_SHIFT);
-
- /*
- * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
- * through MMR
- */
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLENSRC);
-
- /* Set PLLEN=0 => PLL BYPASS MODE */
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN);
-
- dm365_waitloop(150);
-
- /* PLLRST=1(reset assert) */
- setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST);
-
- dm365_waitloop(300);
-
- /*Bring PLL out of Reset*/
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST);
-
- /* Program the Multiper and Pre-Divider for PLL1 */
- writel(pllmult, &dv_pll0_regs->pllm);
- writel(prediv, &dv_pll0_regs->prediv);
-
- /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
- PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
- /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE,
- &dv_pll0_regs->secctl);
- /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */
- writel(PLLSECCTL_STOPMODE, &dv_pll0_regs->secctl);
- /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
-
- /* Program the PostDiv for PLL1 */
- writel(PLL_POSTDEN, &dv_pll0_regs->postdiv);
-
- /* Post divider setting for PLL1 */
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV2, &dv_pll0_regs->plldiv2);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV3, &dv_pll0_regs->plldiv3);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV4, &dv_pll0_regs->plldiv4);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV5, &dv_pll0_regs->plldiv5);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV6, &dv_pll0_regs->plldiv6);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV7, &dv_pll0_regs->plldiv7);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV8, &dv_pll0_regs->plldiv8);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV9, &dv_pll0_regs->plldiv9);
-
- dm365_waitloop(300);
-
- /* Set the GOSET bit */
- writel(PLLCMD_GOSET, &dv_pll0_regs->pllcmd); /* Go */
-
- dm365_waitloop(300);
-
- /* Wait for PLL to LOCK */
- while (!((readl(&dv_sys_module_regs->pll0_config) & PLL0_LOCK)
- == PLL0_LOCK))
- ;
-
- /* Enable the PLL Bit of PLLCTL*/
- setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN);
-
- return 0;
-}
-
-int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
-{
- unsigned int clksrc = 0x0;
-
- /* Power up the PLL*/
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLPWRDN);
-
- /*
- * Select the Clock Mode as Onchip Oscilator or External Clock on
- * MXI pin
- * VDB has input on MXI pin
- */
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9);
- setbits_le32(&dv_pll1_regs->pllctl,
- clksrc << PLLCTL_CLOCK_MODE_SHIFT);
-
- /*
- * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
- * through MMR
- */
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLENSRC);
-
- /* Set PLLEN=0 => PLL BYPASS MODE */
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN);
-
- dm365_waitloop(50);
-
- /* PLLRST=1(reset assert) */
- setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST);
-
- dm365_waitloop(300);
-
- /* Bring PLL out of Reset */
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST);
-
- /* Program the Multiper and Pre-Divider for PLL2 */
- writel(pllm, &dv_pll1_regs->pllm);
- writel(prediv, &dv_pll1_regs->prediv);
-
- writel(PLL_POSTDEN, &dv_pll1_regs->postdiv);
-
- /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
- PLLSECCTL_TINITZ, &dv_pll1_regs->secctl);
- /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE,
- &dv_pll1_regs->secctl);
- /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */
- writel(PLLSECCTL_STOPMODE, &dv_pll1_regs->secctl);
- /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll1_regs->secctl);
-
- /* Post divider setting for PLL2 */
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV1, &dv_pll1_regs->plldiv1);
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV2, &dv_pll1_regs->plldiv2);
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV3, &dv_pll1_regs->plldiv3);
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV4, &dv_pll1_regs->plldiv4);
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV5, &dv_pll1_regs->plldiv5);
-
- /* GoCmd for PostDivider to take effect */
- writel(PLLCMD_GOSET, &dv_pll1_regs->pllcmd);
-
- dm365_waitloop(150);
-
- /* Wait for PLL to LOCK */
- while (!((readl(&dv_sys_module_regs->pll1_config) & PLL1_LOCK)
- == PLL1_LOCK))
- ;
-
- dm365_waitloop(4100);
-
- /* Enable the PLL2 */
- setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN);
-
- /* do this after PLL's have been set up */
- writel(CONFIG_SYS_DM36x_PERI_CLK_CTRL,
- &dv_sys_module_regs->peri_clkctl);
-
- return 0;
-}
-
-int dm365_ddr_setup(void)
-{
- lpsc_on(DAVINCI_LPSC_DDR_EMIF);
- clrbits_le32(&dv_sys_module_regs->vtpiocr,
- VPTIO_IOPWRDN | VPTIO_CLRZ | VPTIO_LOCK | VPTIO_PWRDN);
-
- /* Set bit CLRZ (bit 13) */
- setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_CLRZ);
-
- /* Check VTP READY Status */
- while (!(readl(&dv_sys_module_regs->vtpiocr) & VPTIO_RDY))
- ;
-
- /* Set bit VTP_IOPWRDWN bit 14 for DDR input buffers) */
- setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_IOPWRDN);
-
- /* Set bit LOCK(bit7) */
- setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_LOCK);
-
- /*
- * Powerdown VTP as it is locked (bit 6)
- * Set bit VTP_IOPWRDWN bit 14 for DDR input buffers)
- */
- setbits_le32(&dv_sys_module_regs->vtpiocr,
- VPTIO_IOPWRDN | VPTIO_PWRDN);
-
- /* Wait for calibration to complete */
- dm365_waitloop(150);
-
- /* Set the DDR2 to synreset, then enable it again */
- lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
- lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
- writel(CONFIG_SYS_DM36x_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
-
- /* Program SDRAM Bank Config Register */
- writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_BOOTUNLOCK),
- &dv_ddr2_regs_ctrl->sdbcr);
- writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_TIMUNLOCK),
- &dv_ddr2_regs_ctrl->sdbcr);
-
- /* Program SDRAM Timing Control Register1 */
- writel(CONFIG_SYS_DM36x_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
- /* Program SDRAM Timing Control Register2 */
- writel(CONFIG_SYS_DM36x_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
-
- writel(CONFIG_SYS_DM36x_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
-
- writel(CONFIG_SYS_DM36x_DDR2_SDBCR, &dv_ddr2_regs_ctrl->sdbcr);
-
- /* Program SDRAM Refresh Control Register */
- writel(CONFIG_SYS_DM36x_DDR2_SDRCR, &dv_ddr2_regs_ctrl->sdrcr);
-
- lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
- lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
- return 0;
-}
-
-static void dm365_vpss_sync_reset(void)
-{
- unsigned int PdNum = 0;
-
- /* VPSS_CLKMD 1:1 */
- setbits_le32(&dv_sys_module_regs->vpss_clkctl,
- VPSS_CLK_CTL_VPSS_CLKMD);
-
- /* LPSC SyncReset DDR Clock Enable */
- writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) &
- ~PSC_MD_STATE_MSK) | PSC_SYNCRESET),
- &dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]);
-
- writel((1 << PdNum), &dv_psc_regs->ptcmd);
-
- while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0))
- ;
- while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) &
- PSC_MD_STATE_MSK) == PSC_SYNCRESET))
- ;
-}
-
-static void dm365_por_reset(void)
-{
- struct davinci_timer *wdog =
- (struct davinci_timer *)DAVINCI_WDOG_BASE;
-
- if (readl(&dv_pll0_regs->rstype) &
- (PLL_RSTYPE_POR | PLL_RSTYPE_XWRST)) {
- dm365_vpss_sync_reset();
-
- writel(DV_TMPBUF_VAL, TMPBUF);
- setbits_le32(TMPSTATUS, FLAG_PORRST);
- writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1);
- writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2);
-
- while (1);
- }
-}
-
-static void dm365_wdt_reset(void)
-{
- struct davinci_timer *wdog =
- (struct davinci_timer *)DAVINCI_WDOG_BASE;
-
- if (readl(TMPBUF) != DV_TMPBUF_VAL) {
- writel(DV_TMPBUF_VAL, TMPBUF);
- setbits_le32(TMPSTATUS, FLAG_PORRST);
- setbits_le32(TMPSTATUS, FLAG_FLGOFF);
-
- dm365_waitloop(100);
-
- dm365_vpss_sync_reset();
-
- writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1);
- writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2);
-
- while (1);
- }
-}
-
-static void dm365_wdt_flag_on(void)
-{
- /* VPSS_CLKMD 1:2 */
- clrbits_le32(&dv_sys_module_regs->vpss_clkctl,
- VPSS_CLK_CTL_VPSS_CLKMD);
- writel(0, TMPBUF);
- setbits_le32(TMPSTATUS, FLAG_FLGON);
-}
-
-void dm365_psc_init(void)
-{
- unsigned char i = 0;
- unsigned char lpsc_start;
- unsigned char lpsc_end, lpscgroup, lpscmin, lpscmax;
- unsigned int PdNum = 0;
-
- lpscmin = 0;
- lpscmax = 2;
-
- for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) {
- if (lpscgroup == 0) {
- /* Enabling LPSC 3 to 28 SCR first */
- lpsc_start = DAVINCI_LPSC_VPSSMSTR;
- lpsc_end = DAVINCI_LPSC_TIMER1;
- } else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */
- lpsc_start = DAVINCI_LPSC_CFG5;
- lpsc_end = DAVINCI_LPSC_VPSSMASTER;
- } else {
- lpsc_start = DAVINCI_LPSC_MJCP;
- lpsc_end = DAVINCI_LPSC_HDVICP;
- }
-
- /* NEXT=0x3, Enable LPSC's */
- for (i = lpsc_start; i <= lpsc_end; i++)
- setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE);
-
- /*
- * Program goctl to start transition sequence for LPSCs
- * CSL_PSC_0_REGS->PTCMD = (1<<PdNum); Kick off Power
- * Domain 0 Modules
- */
- writel((1 << PdNum), &dv_psc_regs->ptcmd);
-
- /*
- * Wait for GOSTAT = NO TRANSITION from PSC for Powerdomain 0
- */
- while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT)
- == 0))
- ;
-
- /* Wait for MODSTAT = ENABLE from LPSC's */
- for (i = lpsc_start; i <= lpsc_end; i++)
- while (!((readl(&dv_psc_regs->mdstat[i]) &
- PSC_MD_STATE_MSK) == PSC_ENABLE))
- ;
- }
-}
-
-static void dm365_emif_init(void)
-{
- writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr);
- writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr);
-
- setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND);
-
- writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr);
-
- return;
-}
-
-void dm365_pinmux_ctl(unsigned long offset, unsigned long mask,
- unsigned long value)
-{
- clrbits_le32(&dv_sys_module_regs->pinmux[offset], mask);
- setbits_le32(&dv_sys_module_regs->pinmux[offset], (mask & value));
-}
-
-__attribute__((weak))
-void board_gpio_init(void)
-{
- return;
-}
-
-#if defined(CONFIG_POST)
-int post_log(char *format, ...)
-{
- return 0;
-}
-#endif
-
-void dm36x_lowlevel_init(ulong bootflag)
-{
- struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs =
- (struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 +
- DAVINCI_UART_CTRL_BASE);
-
- /* Mask all interrupts */
- writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl);
- writel(0x0, &dv_aintc_regs->eabase);
- writel(0x0, &dv_aintc_regs->eint0);
- writel(0x0, &dv_aintc_regs->eint1);
-
- /* Clear all interrupts */
- writel(0xffffffff, &dv_aintc_regs->fiq0);
- writel(0xffffffff, &dv_aintc_regs->fiq1);
- writel(0xffffffff, &dv_aintc_regs->irq0);
- writel(0xffffffff, &dv_aintc_regs->irq1);
-
- dm365_por_reset();
- dm365_wdt_reset();
-
- /* System PSC setup - enable all */
- dm365_psc_init();
-
- /* Setup Pinmux */
- dm365_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX0);
- dm365_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX1);
- dm365_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX2);
- dm365_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX3);
- dm365_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX4);
-
- /* PLL setup */
- dm365_pll1_init(CONFIG_SYS_DM36x_PLL1_PLLM,
- CONFIG_SYS_DM36x_PLL1_PREDIV);
- dm365_pll2_init(CONFIG_SYS_DM36x_PLL2_PLLM,
- CONFIG_SYS_DM36x_PLL2_PREDIV);
-
- /* GPIO setup */
- board_gpio_init();
-
- NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
- CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-
- /*
- * Fix Power and Emulation Management Register
- * see sprufh2.pdf page 38 Table 22
- */
- writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
- DAVINCI_UART_PWREMU_MGMT_UTRST),
- &davinci_uart_ctrl_regs->pwremu_mgmt);
-
- puts("ddr init\n");
- dm365_ddr_setup();
-
- puts("emif init\n");
- dm365_emif_init();
-
- dm365_wdt_flag_on();
-
-#if defined(CONFIG_POST)
- /*
- * Do memory tests, calls arch_memory_failure_handle()
- * if error detected.
- */
- memory_post_test(0);
-#endif
-}
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
deleted file mode 100644
index 2be6a23..0000000
--- a/arch/arm/mach-davinci/dm644x.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SoC-specific code for tms320dm644x chips
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-
-#define PINMUX0_EMACEN (1 << 31)
-#define PINMUX0_AECS5 (1 << 11)
-#define PINMUX0_AECS4 (1 << 10)
-
-#define PINMUX1_I2C (1 << 7)
-#define PINMUX1_UART1 (1 << 1)
-#define PINMUX1_UART0 (1 << 0)
-
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x00006001;
-
- /* Enable UART0 MUX lines */
- REG(PINMUX1) |= PINMUX1_UART0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-void davinci_enable_emac(void)
-{
- lpsc_on(DAVINCI_LPSC_EMAC);
- lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
- lpsc_on(DAVINCI_LPSC_MDIO);
-
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0;
-
- /* Enable EMAC. */
- REG(PINMUX0) |= PINMUX0_EMACEN;
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_LPSC_I2C);
-
- /* Enable I2C pin Mux */
- REG(PINMUX1) |= PINMUX1_I2C;
-}
-#endif
-
-void davinci_errata_workarounds(void)
-{
- /*
- * Workaround for TMS320DM6446 errata 1.3.22:
- * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
- * Revision(s) Affected: 1.3 and earlier
- */
- REG(PSC_SILVER_BULLET) = 0;
-
- /*
- * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
- * as suggested in TMS320DM6446 errata 2.1.2:
- *
- * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
- * low priority modules can occupy the bus and prevent high priority
- * modules like the VPSS from getting the required DDR2 throughput.
- * A hex value of 0x20 should provide a good ARM (cache enabled)
- * performance and still allow good utilization by the VPSS or other
- * modules.
- */
- REG(VBPR) = 0x20;
-}
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
deleted file mode 100644
index 199c403..0000000
--- a/arch/arm/mach-davinci/dm646x.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SoC-specific code for TMS320DM646x chips
- */
-
-#include <asm/arch/hardware.h>
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_DM646X_LPSC_UART0);
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-void davinci_enable_emac(void)
-{
- lpsc_on(DAVINCI_DM646X_LPSC_EMAC);
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_DM646X_LPSC_I2C);
-}
-#endif
diff --git a/arch/arm/mach-davinci/dp83848.c b/arch/arm/mach-davinci/dp83848.c
deleted file mode 100644
index 7115d7b..0000000
--- a/arch/arm/mach-davinci/dp83848.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * National Semiconductor DP83848 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- */
-
-#include <common.h>
-#include <net.h>
-#include <dp83848.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/ti/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-int dp83848_is_phy_connected(int phy_addr)
-{
- u_int16_t id1, id2;
-
- if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
- return(0);
- if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
- return(0);
-
- if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
- return(1);
-
- return(0);
-}
-
-int dp83848_get_link_speed(int phy_addr)
-{
- u_int16_t tmp;
- volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
-
- if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
- return(0);
-
- if (!(tmp & DP83848_LINK_STATUS)) /* link up? */
- return(0);
-
- if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
- return(0);
-
- /* Speed doesn't matter, there is no setting for it in EMAC... */
- if (tmp & DP83848_DUPLEX) {
- /* set DM644x EMAC for Full Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
- EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
- } else {
- /*set DM644x EMAC for Half Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
- }
-
- return(1);
-}
-
-
-int dp83848_init_phy(int phy_addr)
-{
- int ret = 1;
-
- if (!dp83848_get_link_speed(phy_addr)) {
- /* Try another time */
- udelay(100000);
- ret = dp83848_get_link_speed(phy_addr);
- }
-
- /* Disable PHY Interrupts */
- davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
-
- return(ret);
-}
-
-
-int dp83848_auto_negotiate(int phy_addr)
-{
- u_int16_t tmp;
-
-
- if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
- return(0);
-
- /* Restart Auto_negotiation */
- tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */
- tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */
- davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
- /* Set the Auto_negotiation Advertisement Register
- * MII advertising for Next page, 100BaseTxFD and HD,
- * 10BaseTFD and HD, IEEE 802.3
- */
- tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
- DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
- davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
-
-
- /* Read Control Register */
- if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
- return(0);
-
- tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
- davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
- /* Restart Auto_negotiation */
- tmp |= DP83848_RESTART_AUTONEG;
- davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
- /*check AutoNegotiate complete */
- udelay(10000);
- if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
- return(0);
-
- if (!(tmp & DP83848_AUTONEG_COMP))
- return(0);
-
- return (dp83848_get_link_speed(phy_addr));
-}
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/mach-davinci/et1011c.c b/arch/arm/mach-davinci/et1011c.c
deleted file mode 100644
index bfb7ff2..0000000
--- a/arch/arm/mach-davinci/et1011c.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * LSI ET1011C PHY Driver for TI DaVinci(TMS320DM6467) board.
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <common.h>
-#include <net.h>
-#include <miiphy.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/ti/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-/* LSI PHYSICAL LAYER TRANSCEIVER ET1011C */
-
-#define MII_PHY_CONFIG_REG 22
-
-/* PHY Config bits */
-#define PHY_SYS_CLK_EN (1 << 4)
-
-int et1011c_get_link_speed(int phy_addr)
-{
- u_int16_t data;
-
- if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &data) && (data & 0x04)) {
- davinci_eth_phy_read(phy_addr, MII_PHY_CONFIG_REG, &data);
- /* Enable 125MHz clock sourced from PHY */
- davinci_eth_phy_write(phy_addr, MII_PHY_CONFIG_REG,
- data | PHY_SYS_CLK_EN);
- return (1);
- }
- return (0);
-}
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/mach-davinci/include/mach/davinci_misc.h b/arch/arm/mach-davinci/include/mach/davinci_misc.h
index 842be58..48b11f7 100644
--- a/arch/arm/mach-davinci/include/mach/davinci_misc.h
+++ b/arch/arm/mach-davinci/include/mach/davinci_misc.h
@@ -40,13 +40,11 @@
int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins);
int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
int n_items);
-#if defined(CONFIG_DRIVER_TI_EMAC) && defined(CONFIG_SOC_DA8XX)
+#if defined(CONFIG_DRIVER_TI_EMAC)
void davinci_emac_mii_mode_sel(int mode_sel);
#endif
-#if defined(CONFIG_SOC_DA8XX)
void irq_init(void);
int da8xx_configure_lpsc_items(const struct lpsc_resource *item,
const int n_items);
-#endif
#endif /* __MISC_H */
diff --git a/arch/arm/mach-davinci/include/mach/emac_defs.h b/arch/arm/mach-davinci/include/mach/emac_defs.h
index b08d06d..7c6c19b 100644
--- a/arch/arm/mach-davinci/include/mach/emac_defs.h
+++ b/arch/arm/mach-davinci/include/mach/emac_defs.h
@@ -23,71 +23,15 @@
#include <asm/arch/hardware.h>
-#ifdef CONFIG_SOC_DM365
-#define EMAC_BASE_ADDR (0x01d07000)
-#define EMAC_WRAPPER_BASE_ADDR (0x01d0a000)
-#define EMAC_WRAPPER_RAM_ADDR (0x01d08000)
-#define EMAC_MDIO_BASE_ADDR (0x01d0b000)
-#define DAVINCI_EMAC_VERSION2
-#elif defined(CONFIG_SOC_DA8XX)
#define EMAC_BASE_ADDR DAVINCI_EMAC_CNTRL_REGS_BASE
#define EMAC_WRAPPER_BASE_ADDR DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE
#define EMAC_WRAPPER_RAM_ADDR DAVINCI_EMAC_WRAPPER_RAM_BASE
#define EMAC_MDIO_BASE_ADDR DAVINCI_MDIO_CNTRL_REGS_BASE
#define DAVINCI_EMAC_VERSION2
-#else
-#define EMAC_BASE_ADDR (0x01c80000)
-#define EMAC_WRAPPER_BASE_ADDR (0x01c81000)
-#define EMAC_WRAPPER_RAM_ADDR (0x01c82000)
-#define EMAC_MDIO_BASE_ADDR (0x01c84000)
-#endif
-#ifdef CONFIG_SOC_DM646X
-#define DAVINCI_EMAC_VERSION2
-#define DAVINCI_EMAC_GIG_ENABLE
-#endif
-
-#ifdef CONFIG_SOC_DM646X
-/* MDIO module input frequency */
-#define EMAC_MDIO_BUS_FREQ 76500000
-/* MDIO clock output frequency */
-#define EMAC_MDIO_CLOCK_FREQ 2500000 /* 2.5 MHz */
-#elif defined(CONFIG_SOC_DM365)
-/* MDIO module input frequency */
-#define EMAC_MDIO_BUS_FREQ 121500000
-/* MDIO clock output frequency */
-#define EMAC_MDIO_CLOCK_FREQ 2200000 /* 2.2 MHz */
-#elif defined(CONFIG_SOC_DA8XX)
/* MDIO module input frequency */
#define EMAC_MDIO_BUS_FREQ clk_get(DAVINCI_MDIO_CLKID)
/* MDIO clock output frequency */
#define EMAC_MDIO_CLOCK_FREQ 2000000 /* 2.0 MHz */
-#else
-/* MDIO module input frequency */
-#define EMAC_MDIO_BUS_FREQ 99000000 /* PLL/6 - 99 MHz */
-/* MDIO clock output frequency */
-#define EMAC_MDIO_CLOCK_FREQ 2000000 /* 2.0 MHz */
-#endif
-
-#define PHY_KSZ8873 (0x00221450)
-int ksz8873_is_phy_connected(int phy_addr);
-int ksz8873_get_link_speed(int phy_addr);
-int ksz8873_init_phy(int phy_addr);
-int ksz8873_auto_negotiate(int phy_addr);
-
-#define PHY_LXT972 (0x001378e2)
-int lxt972_is_phy_connected(int phy_addr);
-int lxt972_get_link_speed(int phy_addr);
-int lxt972_init_phy(int phy_addr);
-int lxt972_auto_negotiate(int phy_addr);
-
-#define PHY_DP83848 (0x20005c90)
-int dp83848_is_phy_connected(int phy_addr);
-int dp83848_get_link_speed(int phy_addr);
-int dp83848_init_phy(int phy_addr);
-int dp83848_auto_negotiate(int phy_addr);
-
-#define PHY_ET1011C (0x282f013)
-int et1011c_get_link_speed(int phy_addr);
#endif /* _DM644X_EMAC_H_ */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index 3981978..3dca50f 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -5,21 +5,12 @@
#ifndef _GPIO_DEFS_H_
#define _GPIO_DEFS_H_
-#ifndef CONFIG_SOC_DA8XX
-#define DAVINCI_GPIO_BINTEN 0x01C67008
-#define DAVINCI_GPIO_BANK01 0x01C67010
-#define DAVINCI_GPIO_BANK23 0x01C67038
-#define DAVINCI_GPIO_BANK45 0x01C67060
-#define DAVINCI_GPIO_BANK67 0x01C67088
-
-#else /* CONFIG_SOC_DA8XX */
#define DAVINCI_GPIO_BINTEN 0x01E26008
#define DAVINCI_GPIO_BANK01 0x01E26010
#define DAVINCI_GPIO_BANK23 0x01E26038
#define DAVINCI_GPIO_BANK45 0x01E26060
#define DAVINCI_GPIO_BANK67 0x01E26088
#define DAVINCI_GPIO_BANK8 0x01E260B0
-#endif /* CONFIG_SOC_DA8XX */
#define davinci_gpio_bank01 ((struct davinci_gpio *)DAVINCI_GPIO_BANK01)
#define davinci_gpio_bank23 ((struct davinci_gpio *)DAVINCI_GPIO_BANK23)
@@ -31,10 +22,7 @@
#define gpio_status() gpio_info()
#endif
#define GPIO_NAME_SIZE 20
-#if defined(CONFIG_SOC_DM644X)
-/* GPIO0 to GPIO53, omit the V3.3 volts one */
-#define MAX_NUM_GPIOS 70
-#elif defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850)
+#if !defined(CONFIG_SOC_DA850)
#define MAX_NUM_GPIOS 128
#else
#define MAX_NUM_GPIOS 144
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index ca5f85a..4466c6c 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -23,89 +23,6 @@
typedef volatile unsigned int * dv_reg_p;
#endif
-/*
- * Base register addresses
- *
- * NOTE: some of these DM6446-specific addresses DO NOT WORK
- * on other DaVinci chips. Double check them before you try
- * using the addresses ... or PSC module identifiers, etc.
- */
-#ifndef CONFIG_SOC_DA8XX
-
-#define DAVINCI_DMA_3PCC_BASE (0x01c00000)
-#define DAVINCI_DMA_3PTC0_BASE (0x01c10000)
-#define DAVINCI_DMA_3PTC1_BASE (0x01c10400)
-#define DAVINCI_UART0_BASE (0x01c20000)
-#define DAVINCI_UART1_BASE (0x01c20400)
-#define DAVINCI_TIMER3_BASE (0x01c20800)
-#define DAVINCI_I2C_BASE (0x01c21000)
-#define DAVINCI_TIMER0_BASE (0x01c21400)
-#define DAVINCI_TIMER1_BASE (0x01c21800)
-#define DAVINCI_WDOG_BASE (0x01c21c00)
-#define DAVINCI_PWM0_BASE (0x01c22000)
-#define DAVINCI_PWM1_BASE (0x01c22400)
-#define DAVINCI_PWM2_BASE (0x01c22800)
-#define DAVINCI_TIMER4_BASE (0x01c23800)
-#define DAVINCI_SYSTEM_MODULE_BASE (0x01c40000)
-#define DAVINCI_PLL_CNTRL0_BASE (0x01c40800)
-#define DAVINCI_PLL_CNTRL1_BASE (0x01c40c00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01c41000)
-#define DAVINCI_ARM_INTC_BASE (0x01c48000)
-#define DAVINCI_USB_OTG_BASE (0x01c64000)
-#define DAVINCI_CFC_ATA_BASE (0x01c66000)
-#define DAVINCI_SPI_BASE (0x01c66800)
-#define DAVINCI_GPIO_BASE (0x01c67000)
-#define DAVINCI_VPSS_REGS_BASE (0x01c70000)
-#if !defined(CONFIG_SOC_DM646X)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
-#endif
-#define DAVINCI_DDR_BASE (0x80000000)
-
-#ifdef CONFIG_SOC_DM644X
-#define DAVINCI_UART2_BASE 0x01c20800
-#define DAVINCI_UHPI_BASE 0x01c67800
-#define DAVINCI_EMAC_CNTRL_REGS_BASE 0x01c80000
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE 0x01c81000
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE 0x01c82000
-#define DAVINCI_MDIO_CNTRL_REGS_BASE 0x01c84000
-#define DAVINCI_IMCOP_BASE 0x01cc0000
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01e00000
-#define DAVINCI_VLYNQ_BASE 0x01e01000
-#define DAVINCI_ASP_BASE 0x01e02000
-#define DAVINCI_MMC_SD_BASE 0x01e10000
-#define DAVINCI_MS_BASE 0x01e20000
-#define DAVINCI_VLYNQ_REMOTE_BASE 0x0c000000
-
-#elif defined(CONFIG_SOC_DM355)
-#define DAVINCI_MMC_SD1_BASE 0x01e00000
-#define DAVINCI_ASP0_BASE 0x01e02000
-#define DAVINCI_ASP1_BASE 0x01e04000
-#define DAVINCI_UART2_BASE 0x01e06000
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01e10000
-#define DAVINCI_MMC_SD0_BASE 0x01e11000
-
-#elif defined(CONFIG_SOC_DM365)
-#define DAVINCI_MMC_SD1_BASE 0x01d00000
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01d10000
-#define DAVINCI_MMC_SD0_BASE 0x01d11000
-#define DAVINCI_DDR_EMIF_CTRL_BASE 0x20000000
-#define DAVINCI_SPI0_BASE 0x01c66000
-#define DAVINCI_SPI1_BASE 0x01c66800
-
-#elif defined(CONFIG_SOC_DM646X)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x20008000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x44000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x46000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x48000000
-
-#endif
-
-#else /* CONFIG_SOC_DA8XX */
-
#define DAVINCI_UART0_BASE 0x01c42000
#define DAVINCI_UART1_BASE 0x01d0c000
#define DAVINCI_UART2_BASE 0x01d0d000
@@ -162,66 +79,11 @@
#define GPIO_BANK6_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x8c)
#define GPIO_BANK6_REG_SET_ADDR (DAVINCI_GPIO_BASE + 0x90)
#define GPIO_BANK6_REG_CLR_ADDR (DAVINCI_GPIO_BASE + 0x94)
-#endif /* CONFIG_SOC_DA8XX */
/* Power and Sleep Controller (PSC) Domains */
#define DAVINCI_GPSC_ARMDOMAIN 0
#define DAVINCI_GPSC_DSPDOMAIN 1
-#ifndef CONFIG_SOC_DA8XX
-
-#define DAVINCI_LPSC_VPSSMSTR 0
-#define DAVINCI_LPSC_VPSSSLV 1
-#define DAVINCI_LPSC_TPCC 2
-#define DAVINCI_LPSC_TPTC0 3
-#define DAVINCI_LPSC_TPTC1 4
-#define DAVINCI_LPSC_EMAC 5
-#define DAVINCI_LPSC_EMAC_WRAPPER 6
-#define DAVINCI_LPSC_MDIO 7
-#define DAVINCI_LPSC_IEEE1394 8
-#define DAVINCI_LPSC_USB 9
-#define DAVINCI_LPSC_ATA 10
-#define DAVINCI_LPSC_VLYNQ 11
-#define DAVINCI_LPSC_UHPI 12
-#define DAVINCI_LPSC_DDR_EMIF 13
-#define DAVINCI_LPSC_AEMIF 14
-#define DAVINCI_LPSC_MMC_SD 15
-#define DAVINCI_LPSC_MEMSTICK 16
-#define DAVINCI_LPSC_McBSP 17
-#define DAVINCI_LPSC_I2C 18
-#define DAVINCI_LPSC_UART0 19
-#define DAVINCI_LPSC_UART1 20
-#define DAVINCI_LPSC_UART2 21
-#define DAVINCI_LPSC_SPI 22
-#define DAVINCI_LPSC_PWM0 23
-#define DAVINCI_LPSC_PWM1 24
-#define DAVINCI_LPSC_PWM2 25
-#define DAVINCI_LPSC_GPIO 26
-#define DAVINCI_LPSC_TIMER0 27
-#define DAVINCI_LPSC_TIMER1 28
-#define DAVINCI_LPSC_TIMER2 29
-#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
-#define DAVINCI_LPSC_ARM 31
-#define DAVINCI_LPSC_SCR2 32
-#define DAVINCI_LPSC_SCR3 33
-#define DAVINCI_LPSC_SCR4 34
-#define DAVINCI_LPSC_CROSSBAR 35
-#define DAVINCI_LPSC_CFG27 36
-#define DAVINCI_LPSC_CFG3 37
-#define DAVINCI_LPSC_CFG5 38
-#define DAVINCI_LPSC_GEM 39
-#define DAVINCI_LPSC_IMCOP 40
-#define DAVINCI_LPSC_VPSSMASTER 47
-#define DAVINCI_LPSC_MJCP 50
-#define DAVINCI_LPSC_HDVICP 51
-
-#define DAVINCI_DM646X_LPSC_EMAC 14
-#define DAVINCI_DM646X_LPSC_UART0 26
-#define DAVINCI_DM646X_LPSC_I2C 31
-#define DAVINCI_DM646X_LPSC_TIMER0 34
-
-#else /* CONFIG_SOC_DA8XX */
-
#define DAVINCI_LPSC_TPCC 0
#define DAVINCI_LPSC_TPTC0 1
#define DAVINCI_LPSC_TPTC1 2
@@ -283,8 +145,6 @@
#define DAVINCI_LPSC_SCR_F8 (DAVINCI_LPSC_PSC1_BASE + 29)
#define DAVINCI_LPSC_BR_F7 (DAVINCI_LPSC_PSC1_BASE + 30)
-#endif /* CONFIG_SOC_DA8XX */
-
#ifndef __ASSEMBLY__
void lpsc_on(unsigned int id);
void lpsc_syncreset(unsigned int id);
@@ -296,30 +156,6 @@
void davinci_enable_i2c(void);
void davinci_errata_workarounds(void);
-#ifndef CONFIG_SOC_DA8XX
-
-/* Some PSC defines */
-#define PSC_CHP_SHRTSW (0x01c40038)
-#define PSC_GBLCTL (0x01c41010)
-#define PSC_EPCPR (0x01c41070)
-#define PSC_EPCCR (0x01c41078)
-#define PSC_PTCMD (0x01c41120)
-#define PSC_PTSTAT (0x01c41128)
-#define PSC_PDSTAT (0x01c41200)
-#define PSC_PDSTAT1 (0x01c41204)
-#define PSC_PDCTL (0x01c41300)
-#define PSC_PDCTL1 (0x01c41304)
-
-#define PSC_MDCTL_BASE (0x01c41a00)
-#define PSC_MDSTAT_BASE (0x01c41800)
-
-#define VDD3P3V_PWDN (0x01c40048)
-#define UART0_PWREMU_MGMT (0x01c20030)
-
-#define PSC_SILVER_BULLET (0x01c41a20)
-
-#else /* CONFIG_SOC_DA8XX */
-
#define PSC_ENABLE 0x3
#define PSC_DISABLE 0x2
#define PSC_SYNCRESET 0x1
@@ -354,41 +190,9 @@
#define davinci_psc0_regs ((struct davinci_psc_regs *)DAVINCI_PSC0_BASE)
#define davinci_psc1_regs ((struct davinci_psc_regs *)DAVINCI_PSC1_BASE)
-#endif /* CONFIG_SOC_DA8XX */
-
#define PSC_MDSTAT_STATE 0x3f
#define PSC_MDCTL_NEXT 0x07
-#ifndef CONFIG_SOC_DA8XX
-
-/* Miscellania... */
-#define VBPR (0x20000020)
-
-/* NOTE: system control modules are *highly* chip-specific, both
- * as to register content (e.g. for muxing) and which registers exist.
- */
-#define PINMUX0 0x01c40000
-#define PINMUX1 0x01c40004
-#define PINMUX2 0x01c40008
-#define PINMUX3 0x01c4000c
-#define PINMUX4 0x01c40010
-
-struct davinci_uart_ctrl_regs {
- dv_reg revid1;
- dv_reg res;
- dv_reg pwremu_mgmt;
- dv_reg mdr;
-};
-
-#define DAVINCI_UART_CTRL_BASE 0x28
-
-/* UART PWREMU_MGMT definitions */
-#define DAVINCI_UART_PWREMU_MGMT_FREE (1 << 0)
-#define DAVINCI_UART_PWREMU_MGMT_URRST (1 << 13)
-#define DAVINCI_UART_PWREMU_MGMT_UTRST (1 << 14)
-
-#else /* CONFIG_SOC_DA8XX */
-
struct davinci_pllc_regs {
dv_reg revid;
dv_reg rsvd1[56];
@@ -606,26 +410,6 @@
DAVINCI_PLL1_SYSCLK2 : DAVINCI_PLL0_SYSCLK2;
}
-#endif /* CONFIG_SOC_DA8XX */
-
-#if defined(CONFIG_SOC_DM365)
-#include <asm/arch/aintc_defs.h>
-#include <asm/arch/ddr2_defs.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pll_defs.h>
-#include <asm/arch/psc_defs.h>
-#include <asm/arch/syscfg_defs.h>
-#include <asm/arch/timer_defs.h>
-
-#define TMPBUF 0x00017ff8
-#define TMPSTATUS 0x00017ff0
-#define DV_TMPBUF_VAL 0x591b3ed7
-#define FLAG_PORRST 0x00000001
-#define FLAG_WDTRST 0x00000002
-#define FLAG_FLGON 0x00000004
-#define FLAG_FLGOFF 0x00000010
-
-#endif
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/i2c_defs.h b/arch/arm/mach-davinci/include/mach/i2c_defs.h
index 50e31ca..f12460d 100644
--- a/arch/arm/mach-davinci/include/mach/i2c_defs.h
+++ b/arch/arm/mach-davinci/include/mach/i2c_defs.h
@@ -8,10 +8,6 @@
#ifndef _I2C_DEFS_H_
#define _I2C_DEFS_H_
-#ifndef CONFIG_SOC_DA8XX
-#define I2C_BASE 0x01c21000
-#else
#define I2C_BASE 0x01c22000
-#endif
#endif
diff --git a/arch/arm/mach-davinci/include/mach/syscfg_defs.h b/arch/arm/mach-davinci/include/mach/syscfg_defs.h
deleted file mode 100644
index 41deeda..0000000
--- a/arch/arm/mach-davinci/include/mach/syscfg_defs.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- */
-#ifndef _DV_SYSCFG_DEFS_H_
-#define _DV_SYSCFG_DEFS_H_
-
-#ifndef CONFIG_SOC_DA8XX
-/* System Control Module register structure for DM365 */
-struct dv_sys_module_regs {
- unsigned int pinmux[5]; /* 0x00 */
- unsigned int bootcfg; /* 0x14 */
- unsigned int arm_intmux; /* 0x18 */
- unsigned int edma_evtmux; /* 0x1C */
- unsigned int ddr_slew; /* 0x20 */
- unsigned int clkout; /* 0x24 */
- unsigned int device_id; /* 0x28 */
- unsigned int vdac_config; /* 0x2C */
- unsigned int timer64_ctl; /* 0x30 */
- unsigned int usbbphy_ctl; /* 0x34 */
- unsigned int misc; /* 0x38 */
- unsigned int mstpri[2]; /* 0x3C */
- unsigned int vpss_clkctl; /* 0x44 */
- unsigned int peri_clkctl; /* 0x48 */
- unsigned int deepsleep; /* 0x4C */
- unsigned int dft_enable; /* 0x50 */
- unsigned int debounce[8]; /* 0x54 */
- unsigned int vtpiocr; /* 0x74 */
- unsigned int pupdctl0; /* 0x78 */
- unsigned int pupdctl1; /* 0x7C */
- unsigned int hdimcopbt; /* 0x80 */
- unsigned int pll0_config; /* 0x84 */
- unsigned int pll1_config; /* 0x88 */
-};
-
-#define VPTIO_RDY (1 << 15)
-#define VPTIO_IOPWRDN (1 << 14)
-#define VPTIO_CLRZ (1 << 13)
-#define VPTIO_LOCK (1 << 7)
-#define VPTIO_PWRDN (1 << 6)
-
-#define VPSS_CLK_CTL_VPSS_CLKMD (1 << 7)
-
-#define dv_sys_module_regs \
- ((struct dv_sys_module_regs *)DAVINCI_SYSTEM_MODULE_BASE)
-
-#endif /* !CONFIG_SOC_DA8XX */
-#endif /* _DV_SYSCFG_DEFS_H_ */
diff --git a/arch/arm/mach-davinci/ksz8873.c b/arch/arm/mach-davinci/ksz8873.c
deleted file mode 100644
index 85b0c26..0000000
--- a/arch/arm/mach-davinci/ksz8873.c
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Micrel KSZ8873 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2011 Heiko Schocher <hsdenx.de>
- *
- * based on:
- * National Semiconductor DP83848 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <net.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/io.h>
-#include "../../../drivers/net/ti/davinci_emac.h"
-
-int ksz8873_is_phy_connected(int phy_addr)
-{
- u_int16_t dummy;
-
- return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy);
-}
-
-int ksz8873_get_link_speed(int phy_addr)
-{
- emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
-
- /* we always have a link to the switch, 100 FD */
- writel((EMAC_MACCONTROL_MIIEN_ENABLE |
- EMAC_MACCONTROL_FULLDUPLEX_ENABLE),
- &emac->MACCONTROL);
- return 1;
-}
-
-
-int ksz8873_init_phy(int phy_addr)
-{
- return 1;
-}
-
-
-int ksz8873_auto_negotiate(int phy_addr)
-{
- return dp83848_get_link_speed(phy_addr);
-}
diff --git a/arch/arm/mach-davinci/lxt972.c b/arch/arm/mach-davinci/lxt972.c
deleted file mode 100644
index b54f67d..0000000
--- a/arch/arm/mach-davinci/lxt972.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Intel LXT971/LXT972 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- */
-
-#include <common.h>
-#include <net.h>
-#include <miiphy.h>
-#include <lxt971a.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/ti/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-int lxt972_is_phy_connected(int phy_addr)
-{
- u_int16_t id1, id2;
-
- if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1))
- return(0);
- if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2))
- return(0);
-
- if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
- return(1);
-
- return(0);
-}
-
-int lxt972_get_link_speed(int phy_addr)
-{
- u_int16_t stat1, tmp;
- volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
-
- if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
- return(0);
-
- if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */
- return(0);
-
- if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
- return(0);
-
- tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
-
- davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
- /* Read back */
- if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
- return(0);
-
- /* Speed doesn't matter, there is no setting for it in EMAC... */
- if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
- /* set DM644x EMAC for Full Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
- EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
- } else {
- /*set DM644x EMAC for Half Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
- }
-
- return(1);
-}
-
-
-int lxt972_init_phy(int phy_addr)
-{
- int ret = 1;
-
- if (!lxt972_get_link_speed(phy_addr)) {
- /* Try another time */
- ret = lxt972_get_link_speed(phy_addr);
- }
-
- /* Disable PHY Interrupts */
- davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
-
- return(ret);
-}
-
-
-int lxt972_auto_negotiate(int phy_addr)
-{
- u_int16_t tmp;
-
- if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
- return(0);
-
- /* Restart Auto_negotiation */
- tmp |= BMCR_ANRESTART;
- davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
-
- /*check AutoNegotiate complete */
- udelay (10000);
- if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
- return(0);
-
- if (!(tmp & BMSR_ANEGCOMPLETE))
- return(0);
-
- return (lxt972_get_link_speed(phy_addr));
-}
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/mach-davinci/misc.c b/arch/arm/mach-davinci/misc.c
index 9190415..df500c8 100644
--- a/arch/arm/mach-davinci/misc.c
+++ b/arch/arm/mach-davinci/misc.c
@@ -68,7 +68,6 @@
/*
* Set the mii mode as MII or RMII
*/
-#if defined(CONFIG_SOC_DA8XX)
void davinci_emac_mii_mode_sel(int mode_sel)
{
int val;
@@ -80,7 +79,7 @@
val |= (1 << 8);
writel(val, &davinci_syscfg_regs->cfgchip3);
}
-#endif
+
/*
* If there is no MAC address in the environment, then it will be initialized
* (silently) from the value in the EEPROM.
@@ -106,7 +105,6 @@
}
#endif /* CONFIG_DRIVER_TI_EMAC */
-#if defined(CONFIG_SOC_DA8XX)
void irq_init(void)
{
/*
@@ -135,4 +133,3 @@
return 0;
}
-#endif
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 9c3ff91..dae10aa 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -33,19 +33,8 @@
static void lpsc_transition(unsigned int id, unsigned int state)
{
dv_reg_p mdstat, mdctl, ptstat, ptcmd;
-#ifdef CONFIG_SOC_DA8XX
struct davinci_psc_regs *psc_regs;
-#endif
-#ifndef CONFIG_SOC_DA8XX
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
- ptstat = REG_P(PSC_PTSTAT);
- ptcmd = REG_P(PSC_PTCMD);
-#else
if (id < DAVINCI_LPSC_PSC1_BASE) {
if (id >= PSC_PSC0_MODULE_ID_CNT)
return;
@@ -62,7 +51,6 @@
}
ptstat = &psc_regs->ptstat;
ptcmd = &psc_regs->ptcmd;
-#endif
while (readl(ptstat) & 0x01)
continue;
@@ -71,29 +59,6 @@
return; /* Already in that state */
writel((readl(mdctl) & ~PSC_MDCTL_NEXT) | state, mdctl);
-
- switch (id) {
-#ifdef CONFIG_SOC_DM644X
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- case DAVINCI_LPSC_VPSSSLV:
- case DAVINCI_LPSC_EMAC:
- case DAVINCI_LPSC_EMAC_WRAPPER:
- case DAVINCI_LPSC_MDIO:
- case DAVINCI_LPSC_USB:
- case DAVINCI_LPSC_ATA:
- case DAVINCI_LPSC_VLYNQ:
- case DAVINCI_LPSC_UHPI:
- case DAVINCI_LPSC_DDR_EMIF:
- case DAVINCI_LPSC_AEMIF:
- case DAVINCI_LPSC_MMC_SD:
- case DAVINCI_LPSC_MEMSTICK:
- case DAVINCI_LPSC_McBSP:
- case DAVINCI_LPSC_GPIO:
- writel(readl(mdctl) | 0x200, mdctl);
- break;
-#endif
- }
-
writel(0x01, ptcmd);
while (readl(ptstat) & 0x01)
@@ -116,44 +81,3 @@
{
lpsc_transition(id, 0x0);
}
-
-/* Not all DaVinci chips have a DSP power domain. */
-#ifdef CONFIG_SOC_DM644X
-
-/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-#endif /* have a DSP */
diff --git a/arch/arm/mach-davinci/spl.c b/arch/arm/mach-davinci/spl.c
index c9aaa48..103639e 100644
--- a/arch/arm/mach-davinci/spl.c
+++ b/arch/arm/mach-davinci/spl.c
@@ -33,12 +33,7 @@
void spl_board_init(void)
{
-#ifdef CONFIG_SOC_DM365
- dm36x_lowlevel_init(0);
-#endif
-#ifdef CONFIG_SOC_DA8XX
arch_cpu_init();
-#endif
preloader_console_init();
}
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 3807770..14347e7 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -116,7 +116,6 @@
config TARGET_SPRING
bool "Spring board"
select OF_CONTROL
- select SPL_DISABLE_OF_CONTROL
select SUPPORT_SPL
config TARGET_SMDK5420
@@ -150,7 +149,6 @@
select OF_CONTROL
select PINCTRL
select PINCTRL_EXYNOS7420
- select SPL_DISABLE_OF_CONTROL
select SUPPORT_SPL
endchoice
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 5d901d1..a3de7a4 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -59,6 +59,7 @@
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index c27916c..d2548ff 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -57,6 +57,7 @@
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig
index 23310c3..b52d321 100644
--- a/configs/am57xx_hs_evm_usb_defconfig
+++ b/configs/am57xx_hs_evm_usb_defconfig
@@ -63,6 +63,7 @@
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig
index b69702b6..be9d55e 100644
--- a/configs/apalis-tk1_defconfig
+++ b/configs/apalis-tk1_defconfig
@@ -34,6 +34,7 @@
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_SYS_I2C_TEGRA=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_TEGRA124_MMC_DISABLE_EXT_LOOPBACK=y
CONFIG_E1000=y
CONFIG_PCI=y
diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index 234416e..3292d64 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -58,6 +58,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig
index 3a1a749..9727d28 100644
--- a/configs/arndale_defconfig
+++ b/configs/arndale_defconfig
@@ -26,6 +26,7 @@
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_DM_I2C_COMPAT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig
index fc4429b..b504332 100644
--- a/configs/avnet_ultra96_rev1_defconfig
+++ b/configs/avnet_ultra96_rev1_defconfig
@@ -56,6 +56,7 @@
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig
index c613962..73c78e2 100644
--- a/configs/cl-som-imx7_defconfig
+++ b/configs/cl-som-imx7_defconfig
@@ -50,6 +50,7 @@
# CONFIG_ENV_IS_IN_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig
index 05b19b3..ee3fb14 100644
--- a/configs/clearfog_defconfig
+++ b/configs/clearfog_defconfig
@@ -45,6 +45,7 @@
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_MV=y
diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig
index fa9972b..dedc8b5 100644
--- a/configs/cm_t54_defconfig
+++ b/configs/cm_t54_defconfig
@@ -32,6 +32,7 @@
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_SCSI_AHCI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SCSI=y
CONFIG_CONS_INDEX=4
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index 449f4f9..ba17ec0 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -57,6 +57,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index 5e2a204..0617b12 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -45,6 +45,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
diff --git a/configs/display5_defconfig b/configs/display5_defconfig
index 5c06954..e2f69eb 100644
--- a/configs/display5_defconfig
+++ b/configs/display5_defconfig
@@ -63,6 +63,7 @@
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_DEVICE=y
CONFIG_SPI_FLASH=y
diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig
index 8e26671..0d9eed3 100644
--- a/configs/display5_factory_defconfig
+++ b/configs/display5_factory_defconfig
@@ -64,6 +64,7 @@
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DFU_MMC=y
CONFIG_DFU_SF=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_DEVICE=y
CONFIG_SPI_FLASH=y
diff --git a/configs/dms-ba16-1g_defconfig b/configs/dms-ba16-1g_defconfig
index eed0b67..980f7b4 100644
--- a/configs/dms-ba16-1g_defconfig
+++ b/configs/dms-ba16-1g_defconfig
@@ -32,6 +32,7 @@
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DWC_AHSATA=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
diff --git a/configs/dms-ba16_defconfig b/configs/dms-ba16_defconfig
index d9f6d59..bea75b5 100644
--- a/configs/dms-ba16_defconfig
+++ b/configs/dms-ba16_defconfig
@@ -31,6 +31,7 @@
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DWC_AHSATA=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index ec6b566..682e301 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -65,6 +65,7 @@
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 3f64669..7b50d2c 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -68,6 +68,7 @@
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig
index 47d4ad0..6d6bfbc 100644
--- a/configs/dra7xx_hs_evm_usb_defconfig
+++ b/configs/dra7xx_hs_evm_usb_defconfig
@@ -70,6 +70,7 @@
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
diff --git a/configs/edison_defconfig b/configs/edison_defconfig
index 22fc84a..b99906a 100644
--- a/configs/edison_defconfig
+++ b/configs/edison_defconfig
@@ -30,6 +30,7 @@
CONFIG_CPU=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_RTC_MC146818=y
CONFIG_USB_DWC3_GADGET=y
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index eba3793..3111451 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -42,6 +42,7 @@
CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig
index ff88c3e..f9857d1 100644
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@@ -62,6 +62,7 @@
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_DEVICE=y
CONFIG_PHYLIB=y
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
index b5251ab..27ef264 100644
--- a/configs/gwventana_gw5904_defconfig
+++ b/configs/gwventana_gw5904_defconfig
@@ -62,6 +62,7 @@
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_DEVICE=y
CONFIG_PHYLIB=y
diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig
index e90b3db..25af087 100644
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@@ -64,6 +64,7 @@
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig
index 6e668c5..09f3375 100644
--- a/configs/imx6dl_mamoj_defconfig
+++ b/configs/imx6dl_mamoj_defconfig
@@ -32,6 +32,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=2
CONFIG_SYS_I2C_MXC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig
index 989dc44..6811a62 100644
--- a/configs/imx8mq_evk_defconfig
+++ b/configs/imx8mq_evk_defconfig
@@ -29,6 +29,7 @@
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_DM_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 2fb2fdf..59675e5 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -53,6 +53,7 @@
CONFIG_I2C_MUX_PCA954x=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_PHYLIB=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ATHEROS=y
diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig
index 173ceed..a439631 100644
--- a/configs/liteboard_defconfig
+++ b/configs/liteboard_defconfig
@@ -38,6 +38,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_DM_ETH=y
diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig
index 5c411fe..ae82098 100644
--- a/configs/mt7623n_bpir2_defconfig
+++ b/configs/mt7623n_bpir2_defconfig
@@ -35,6 +35,7 @@
CONFIG_CLK=y
CONFIG_DM_MMC=y
# CONFIG_MMC_QUIRKS is not set
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_MMC_MTK=y
CONFIG_PHY_FIXED=y
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index d232fbc..d3ed3c4 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -73,6 +73,7 @@
CONFIG_FASTBOOT_FLASH_MMC_DEV=2
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig
index 88d363a..b2ca4f9 100644
--- a/configs/mx7dsabresd_defconfig
+++ b/configs/mx7dsabresd_defconfig
@@ -44,6 +44,7 @@
CONFIG_DM_74X164=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
diff --git a/configs/mx7dsabresd_qspi_defconfig b/configs/mx7dsabresd_qspi_defconfig
index 3d74967..27a8387 100644
--- a/configs/mx7dsabresd_qspi_defconfig
+++ b/configs/mx7dsabresd_qspi_defconfig
@@ -44,6 +44,7 @@
CONFIG_DM_74X164=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig
index 6bbacaa..d125ccc 100644
--- a/configs/mx7ulp_evk_defconfig
+++ b/configs/mx7ulp_evk_defconfig
@@ -21,6 +21,7 @@
# CONFIG_MXC_GPIO is not set
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7ULP=y
diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig
index 549ca2e..fcead94 100644
--- a/configs/mx7ulp_evk_plugin_defconfig
+++ b/configs/mx7ulp_evk_plugin_defconfig
@@ -20,6 +20,7 @@
# CONFIG_MXC_GPIO is not set
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7ULP=y
diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
index 4ec4e58..b8ebd56 100644
--- a/configs/odroid-xu3_defconfig
+++ b/configs/odroid-xu3_defconfig
@@ -34,6 +34,7 @@
CONFIG_ADC=y
CONFIG_ADC_EXYNOS=y
CONFIG_DFU_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig
index 9a7fccd..719ab8d 100644
--- a/configs/omap5_uevm_defconfig
+++ b/configs/omap5_uevm_defconfig
@@ -30,6 +30,7 @@
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_CMD_TCA642X=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_SCSI=y
CONFIG_CONS_INDEX=3
diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig
index 6a5e8cc..409bea8 100644
--- a/configs/opos6uldev_defconfig
+++ b/configs/opos6uldev_defconfig
@@ -68,6 +68,7 @@
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_PWRSEQ=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig
index cf55764..c1904f1 100644
--- a/configs/peach-pi_defconfig
+++ b/configs/peach-pi_defconfig
@@ -38,6 +38,7 @@
CONFIG_CROS_EC_KEYB=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_SPI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig
index cecb4ee..da4155b 100644
--- a/configs/peach-pit_defconfig
+++ b/configs/peach-pit_defconfig
@@ -37,6 +37,7 @@
CONFIG_CROS_EC_KEYB=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_SPI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
diff --git a/configs/pico-hobbit-imx6ul_defconfig b/configs/pico-hobbit-imx6ul_defconfig
index fdebb55..5481fffa 100644
--- a/configs/pico-hobbit-imx6ul_defconfig
+++ b/configs/pico-hobbit-imx6ul_defconfig
@@ -45,6 +45,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig
index 33f2a0a..17043d5 100644
--- a/configs/pico-hobbit-imx7d_defconfig
+++ b/configs/pico-hobbit-imx7d_defconfig
@@ -53,6 +53,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig
index 0c58716..af82677 100644
--- a/configs/pico-imx6ul_defconfig
+++ b/configs/pico-imx6ul_defconfig
@@ -47,6 +47,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig
index 41374a3..81eda9d 100644
--- a/configs/pico-imx7d_defconfig
+++ b/configs/pico-imx7d_defconfig
@@ -53,6 +53,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
diff --git a/configs/pico-pi-imx6ul_defconfig b/configs/pico-pi-imx6ul_defconfig
index d8d2661..295c822 100644
--- a/configs/pico-pi-imx6ul_defconfig
+++ b/configs/pico-pi-imx6ul_defconfig
@@ -45,6 +45,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig
index 81d19df..0aa1487 100644
--- a/configs/pico-pi-imx7d_defconfig
+++ b/configs/pico-pi-imx7d_defconfig
@@ -53,6 +53,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
index da08bb8..6b0d7e5 100644
--- a/configs/riotboard_defconfig
+++ b/configs/riotboard_defconfig
@@ -21,6 +21,7 @@
CONFIG_CMD_EXT4_WRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_DM=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
diff --git a/configs/riotboard_spl_defconfig b/configs/riotboard_spl_defconfig
index a485ceb..1b61232 100644
--- a/configs/riotboard_spl_defconfig
+++ b/configs/riotboard_spl_defconfig
@@ -31,6 +31,7 @@
CONFIG_CMD_EXT4_WRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_DM=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig
index 69b58f5..1bdcc47 100644
--- a/configs/smdk5250_defconfig
+++ b/configs/smdk5250_defconfig
@@ -33,6 +33,7 @@
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=1
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig
index 989cd63..7510f80 100644
--- a/configs/smdk5420_defconfig
+++ b/configs/smdk5420_defconfig
@@ -28,6 +28,7 @@
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=1
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
diff --git a/configs/snow_defconfig b/configs/snow_defconfig
index e87f5d5..f474409 100644
--- a/configs/snow_defconfig
+++ b/configs/snow_defconfig
@@ -43,6 +43,7 @@
CONFIG_CROS_EC_KEYB=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
diff --git a/configs/spring_defconfig b/configs/spring_defconfig
index b4a8d5e..bfc7495 100644
--- a/configs/spring_defconfig
+++ b/configs/spring_defconfig
@@ -43,6 +43,7 @@
CONFIG_CROS_EC_KEYB=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index bd75df8..0ea9dff 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -53,6 +53,7 @@
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index f82b770..3c2bb75 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -45,6 +45,7 @@
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig
index 25303e6..2cc30e0 100644
--- a/configs/uniphier_ld4_sld8_defconfig
+++ b/configs/uniphier_ld4_sld8_defconfig
@@ -40,6 +40,7 @@
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_UNIPHIER=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig
index 296424e..61007a6 100644
--- a/configs/uniphier_v7_defconfig
+++ b/configs/uniphier_v7_defconfig
@@ -39,6 +39,7 @@
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_UNIPHIER=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig
index b0c673c..83f7877 100644
--- a/configs/uniphier_v8_defconfig
+++ b/configs/uniphier_v8_defconfig
@@ -34,6 +34,7 @@
CONFIG_I2C_EEPROM=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_SDHCI=y
diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig
index 5d92943..745aa85 100644
--- a/configs/vinco_defconfig
+++ b/configs/vinco_defconfig
@@ -27,6 +27,7 @@
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="at91-vinco"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=50000000
diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index 5347ac8..073ff48 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -33,6 +33,7 @@
CONFIG_EFI_PARTITION=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig
index 300dc38..a79f670 100644
--- a/configs/warp7_bl33_defconfig
+++ b/configs/warp7_bl33_defconfig
@@ -29,6 +29,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig
index 1b5356c..5b35113 100644
--- a/configs/warp7_defconfig
+++ b/configs/warp7_defconfig
@@ -38,6 +38,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
diff --git a/configs/warp_defconfig b/configs/warp_defconfig
index df43a79..a37d769 100644
--- a/configs/warp_defconfig
+++ b/configs/warp_defconfig
@@ -29,6 +29,7 @@
CONFIG_ENV_IS_IN_MMC=y
# CONFIG_NET is not set
CONFIG_DFU_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig
index 91d7c69..c8d6886 100644
--- a/configs/xilinx_zynqmp_mini_emmc0_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig
@@ -53,6 +53,7 @@
# CONFIG_DM_WARN is not set
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
# CONFIG_EFI_LOADER is not set
diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig
index 4515b20..29e4728 100644
--- a/configs/xilinx_zynqmp_mini_emmc1_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig
@@ -53,6 +53,7 @@
# CONFIG_DM_WARN is not set
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
# CONFIG_EFI_LOADER is not set
diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
index a57c71e..7b1f5e9 100644
--- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
@@ -58,6 +58,7 @@
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig
index f0706f3..559a61e 100644
--- a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig
@@ -50,6 +50,7 @@
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_MTD_DEVICE=y
diff --git a/configs/xpress_defconfig b/configs/xpress_defconfig
index 2cbeeb3..709a7ef 100644
--- a/configs/xpress_defconfig
+++ b/configs/xpress_defconfig
@@ -25,6 +25,7 @@
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
diff --git a/configs/xpress_spl_defconfig b/configs/xpress_spl_defconfig
index fb2bf0a..e79a038 100644
--- a/configs/xpress_spl_defconfig
+++ b/configs/xpress_spl_defconfig
@@ -36,6 +36,7 @@
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
diff --git a/configs/zc5202_defconfig b/configs/zc5202_defconfig
index 9ba661c..ae3a6b3 100644
--- a/configs/zc5202_defconfig
+++ b/configs/zc5202_defconfig
@@ -34,6 +34,7 @@
CONFIG_CMD_EXT4_WRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_BUS=3
diff --git a/configs/zc5601_defconfig b/configs/zc5601_defconfig
index ba07f61..65a1915 100644
--- a/configs/zc5601_defconfig
+++ b/configs/zc5601_defconfig
@@ -33,6 +33,7 @@
CONFIG_CMD_EXT4_WRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_BUS=3
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index c34dd5d..e96e693 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -78,6 +78,12 @@
Enable support for reading, writing and programming the
key for the Replay Protection Memory Block partition in eMMC.
+config SUPPORT_EMMC_BOOT
+ bool "Support some additional features of the eMMC boot partitions"
+ help
+ Enable support for eMMC boot partitions. This also enables
+ extensions within the mmc command.
+
config MMC_IO_VOLTAGE
bool "Support IO voltage configuration"
help
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index e6a84a5..cfa9b53 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -730,43 +730,6 @@
return __raw_readl(&davinci_emif_regs->nandfsr) & 0x1;
}
-static void nand_flash_init(void)
-{
- /* This is for DM6446 EVM and *very* similar. DO NOT GROW THIS!
- * Instead, have your board_init() set EMIF timings, based on its
- * knowledge of the clocks and what devices are hooked up ... and
- * don't even do that unless no UBL handled it.
- */
-#ifdef CONFIG_SOC_DM644X
- u_int32_t acfg1 = 0x3ffffffc;
-
- /*------------------------------------------------------------------*
- * NAND FLASH CHIP TIMEOUT @ 459 MHz *
- * *
- * AEMIF.CLK freq = PLL1/6 = 459/6 = 76.5 MHz *
- * AEMIF.CLK period = 1/76.5 MHz = 13.1 ns *
- * *
- *------------------------------------------------------------------*/
- acfg1 = 0
- | (0 << 31) /* selectStrobe */
- | (0 << 30) /* extWait */
- | (1 << 26) /* writeSetup 10 ns */
- | (3 << 20) /* writeStrobe 40 ns */
- | (1 << 17) /* writeHold 10 ns */
- | (1 << 13) /* readSetup 10 ns */
- | (5 << 7) /* readStrobe 60 ns */
- | (1 << 4) /* readHold 10 ns */
- | (3 << 2) /* turnAround ?? ns */
- | (0 << 0) /* asyncSize 8-bit bus */
- ;
-
- __raw_writel(acfg1, &davinci_emif_regs->ab1cr); /* CS2 */
-
- /* NAND flash on CS2 */
- __raw_writel(0x00000101, &davinci_emif_regs->nandfcr);
-#endif
-}
-
void davinci_nand_init(struct nand_chip *nand)
{
#if defined CONFIG_KEYSTONE_RBL_NAND
@@ -820,8 +783,6 @@
nand->write_buf = nand_davinci_write_buf;
nand->dev_ready = nand_davinci_dev_ready;
-
- nand_flash_init();
}
int board_nand_init(struct nand_chip *chip) __attribute__((weak));
diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c
index bb879d8..9d53984 100644
--- a/drivers/net/ti/davinci_emac.c
+++ b/drivers/net/ti/davinci_emac.c
@@ -816,55 +816,12 @@
phy_id |= tmp & 0x0000ffff;
- switch (phy_id) {
-#ifdef PHY_KSZ8873
- case PHY_KSZ8873:
- sprintf(phy[i].name, "KSZ8873 @ 0x%02x",
- active_phy_addr[i]);
- phy[i].init = ksz8873_init_phy;
- phy[i].is_phy_connected = ksz8873_is_phy_connected;
- phy[i].get_link_speed = ksz8873_get_link_speed;
- phy[i].auto_negotiate = ksz8873_auto_negotiate;
- break;
-#endif
-#ifdef PHY_LXT972
- case PHY_LXT972:
- sprintf(phy[i].name, "LXT972 @ 0x%02x",
- active_phy_addr[i]);
- phy[i].init = lxt972_init_phy;
- phy[i].is_phy_connected = lxt972_is_phy_connected;
- phy[i].get_link_speed = lxt972_get_link_speed;
- phy[i].auto_negotiate = lxt972_auto_negotiate;
- break;
-#endif
-#ifdef PHY_DP83848
- case PHY_DP83848:
- sprintf(phy[i].name, "DP83848 @ 0x%02x",
- active_phy_addr[i]);
- phy[i].init = dp83848_init_phy;
- phy[i].is_phy_connected = dp83848_is_phy_connected;
- phy[i].get_link_speed = dp83848_get_link_speed;
- phy[i].auto_negotiate = dp83848_auto_negotiate;
- break;
-#endif
-#ifdef PHY_ET1011C
- case PHY_ET1011C:
- sprintf(phy[i].name, "ET1011C @ 0x%02x",
- active_phy_addr[i]);
- phy[i].init = gen_init_phy;
- phy[i].is_phy_connected = gen_is_phy_connected;
- phy[i].get_link_speed = et1011c_get_link_speed;
- phy[i].auto_negotiate = gen_auto_negotiate;
- break;
-#endif
- default:
- sprintf(phy[i].name, "GENERIC @ 0x%02x",
- active_phy_addr[i]);
- phy[i].init = gen_init_phy;
- phy[i].is_phy_connected = gen_is_phy_connected;
- phy[i].get_link_speed = gen_get_link_speed;
- phy[i].auto_negotiate = gen_auto_negotiate;
- }
+ sprintf(phy[i].name, "GENERIC @ 0x%02x",
+ active_phy_addr[i]);
+ phy[i].init = gen_init_phy;
+ phy[i].is_phy_connected = gen_is_phy_connected;
+ phy[i].get_link_speed = gen_get_link_speed;
+ phy[i].auto_negotiate = gen_auto_negotiate;
debug("Ethernet PHY: %s\n", phy[i].name);
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 2ee0f23..1f28052 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -327,9 +327,7 @@
csr = readw(&musbr->txcsr);
csr |= MUSB_CSR0_TXPKTRDY;
-#if !defined(CONFIG_SOC_DM365)
csr |= MUSB_CSR0_H_DIS_PING;
-#endif
writew(csr, &musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
if (result < 0)
@@ -352,9 +350,7 @@
/* Set the StatusPkt bit */
csr = readw(&musbr->txcsr);
csr |= (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_H_STATUSPKT);
-#if !defined(CONFIG_SOC_DM365)
csr |= MUSB_CSR0_H_DIS_PING;
-#endif
writew(csr, &musbr->txcsr);
/* Wait until TXPKTRDY bit is cleared */
@@ -372,9 +368,7 @@
/* Set the StatusPkt bit and ReqPkt bit */
csr = MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
-#if !defined(CONFIG_SOC_DM365)
csr |= MUSB_CSR0_H_DIS_PING;
-#endif
writew(csr, &musbr->txcsr);
result = wait_until_ep0_ready(dev, MUSB_CSR0_H_REQPKT);
diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h
index 57edeee..22d1e41 100644
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@@ -21,8 +21,6 @@
#define CONFIG_LOADCMD "fatload"
#define CONFIG_RFSPART "2"
-#define CONFIG_SUPPORT_EMMC_BOOT
-
#include "mx6_common.h"
#include <linux/sizes.h>
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index c14b010..2c651aa 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -63,8 +63,6 @@
#define CONFIG_NET_RETRY_COUNT 10
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 1d296ba..9c8c897 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -18,9 +18,6 @@
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-/* SD/MMC support */
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
CONFIG_TDX_CFG_BLOCK_OFFSET)
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 91054d8..9d9e16e 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -46,8 +46,6 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 3
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
/*
* SATA Configs
*/
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 06b02ce..dd321c4 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -14,9 +14,6 @@
#include "exynos5250-common.h"
#include <configs/exynos5-common.h>
-/* SD/MMC configuration */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 84c801d..51af93a 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -31,11 +31,6 @@
/*#define CONFIG_MACH_TYPE 3589*/
#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/
-/* MMC/SD IP block */
-#if defined(CONFIG_EMMC_BOOT)
- #define CONFIG_SUPPORT_EMMC_BOOT
-#endif /* CONFIG_EMMC_BOOT */
-
/*
* When we have NAND flash we expect to be making use of mtdparts,
* both for ease of use in U-Boot and for passing information on to
diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h
index 26d1a97..4c93fc6 100644
--- a/include/configs/cl-som-imx7.h
+++ b/include/configs/cl-som-imx7.h
@@ -153,7 +153,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#endif
/* USB Configs */
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index a00329d..4198ff0 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -26,10 +26,6 @@
*/
#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
/* USB/EHCI configuration */
#define CONFIG_EHCI_IS_TDI
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index cda1b55..2387f86 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -41,7 +41,6 @@
/* Enhance our eMMC support / experience. */
#define CONFIG_HSMMC2_8BIT
-#define CONFIG_SUPPORT_EMMC_BOOT
/* SATA Boot related defines */
#define CONFIG_SPL_SATA_BOOT_DEVICE 0
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 129a424..b540b3e 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -44,8 +44,6 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
/* Network */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE ENET_BASE_ADDR
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 5a4b980..7dfc92c 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -35,8 +35,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 1
#elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
#define CONFIG_SYS_FSL_USDHC_NUM 2
-
-#define CONFIG_SUPPORT_EMMC_BOOT
#endif
#undef CONFIG_BOOTM_PLAN9
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 8ab47ab..8829cba 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -83,7 +83,6 @@
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SUPPORT_EMMC_BOOT
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index f6be659..aec70ee 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -96,8 +96,6 @@
/* SPI SPL */
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
-#define CONFIG_SUPPORT_EMMC_BOOT
-
/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index cf02108..7155eba 100644
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -31,13 +31,6 @@
* it has to be done after each HCD reset */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-/* Support all possible USB ethernet dongles */
-
-/* Extra Commands */
-/* Enable that for switching of boot partitions */
-/* Disabled by default as some sub-commands can brick eMMC */
-/*#define CONFIG_SUPPORT_EMMC_BOOT */
-
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
diff --git a/include/configs/edison.h b/include/configs/edison.h
index a6155ba..218b50a 100644
--- a/include/configs/edison.h
+++ b/include/configs/edison.h
@@ -34,7 +34,6 @@
#define CONFIG_ENV_SIZE (64 * 1024)
#define CONFIG_ENV_OFFSET (3 * 1024 * 1024)
#define CONFIG_ENV_OFFSET_REDUND (6 * 1024 * 1024)
-#define CONFIG_SUPPORT_EMMC_BOOT
/* RTC */
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index 858bed0..8bc7a3a 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -76,7 +76,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 3
#define CONFIG_SYS_MMC_ENV_DEV 2 /* SDHC4 */
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
/* MarSBoard */
#define CONFIG_FDTFILE "imx6q-marsboard.dtb"
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index db1fc93..397bbf6 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -44,7 +44,6 @@
/* MMC SPL */
#define COPY_BL2_FNPTR_ADDR 0x02020030
-#define CONFIG_SUPPORT_EMMC_BOOT
/* specific .lds file */
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 196f114..0481ed0 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -19,9 +19,6 @@
#define CONFIG_MXC_UART_BASE UART3_BASE
#define CONSOLE_DEV "ttymxc2"
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-
#include "mx6_common.h"
#include <linux/sizes.h>
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 93608e5..02ceb4c 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -81,9 +81,6 @@
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-/* eMMC Configs */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
/*
* SATA Configs
*/
diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h
index 030dbed..7605e14 100644
--- a/include/configs/imx6dl-mamoj.h
+++ b/include/configs/imx6dl-mamoj.h
@@ -51,7 +51,6 @@
/* MMC */
#define CONFIG_SYS_MMC_ENV_DEV 2
-#define CONFIG_SUPPORT_EMMC_BOOT
/* Ethernet */
#define CONFIG_FEC_MXC_PHYADDR 1
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index aaecf6f..7759bbf 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -224,7 +224,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_MXC_GPIO
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 18ea5a8..40163c8 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -53,7 +53,6 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define USDHC1_BASE_ADDR 0x5B010000
#define USDHC2_BASE_ADDR 0x5B020000
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h
index a97ccb5..975f324 100644
--- a/include/configs/liteboard.h
+++ b/include/configs/liteboard.h
@@ -24,7 +24,6 @@
/* MMC Configs */
#ifdef CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
#endif
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h
index e449364..5f67893 100644
--- a/include/configs/mt7623.h
+++ b/include/configs/mt7623.h
@@ -42,7 +42,6 @@
/* MMC */
#define MMC_SUPPORTS_TUNING
-#define CONFIG_SUPPORT_EMMC_BOOT
/* DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 555942a..ec15375 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -16,8 +16,6 @@
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONSOLE_DEV "ttymxc0"
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
#include "mx6sabre_common.h"
/* Falcon Mode */
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 39d29de..77856a8 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -38,7 +38,6 @@
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#ifdef CONFIG_IMX_BOOTAUX
diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
index b8dcaa1..5bd6392 100644
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@@ -28,7 +28,6 @@
#define IOMUXC_BASE_ADDR IOMUXC1_RBASE
#define CONFIG_FSL_USDHC
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_SYS_FSL_USDHC_NUM 1
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 66bd288..0d8f945 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -39,7 +39,6 @@
/* Enhance our eMMC support / experience. */
#define CONFIG_HSMMC2_8BIT
-#define CONFIG_SUPPORT_EMMC_BOOT
/* Required support for the TCA642X GPIO we have on the uEVM */
#define CONFIG_TCA642X
diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h
index 70cf466..e0c76ff 100644
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -33,9 +33,6 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* MMC */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
/* USB */
#ifdef CONFIG_USB_EHCI_MX6
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index 050f698..cd051bf 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -41,7 +41,6 @@
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 04d316f..365a598 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -58,7 +58,6 @@
"bootmenu_1=Boot using PICO-Pi baseboard=" \
"setenv fdtfile imx7d-pico-pi.dtb\0" \
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index 3069373..fd6c97a 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -77,7 +77,6 @@
/*MMC SD*/
#define CONFIG_SYS_MMC_MAX_DEVICE 3
-#define CONFIG_SUPPORT_EMMC_BOOT
/*****************************************************************************/
#ifdef CONFIG_DISTRO_DEFAULTS
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 31a9c59..bec7b68 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -94,9 +94,6 @@
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-/* SD/MMC */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index ec22a30..eebb3f7 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -43,7 +43,6 @@
/* MMC */
#ifdef CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_GENERIC_ATMEL_MCI
#define ATMEL_BASE_MMCI 0xfc000000
#define CONFIG_SYS_MMC_CLK_OD 500000
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index d3cbdc6..fd98c14 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -95,7 +95,6 @@
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC4 eMMC */
/* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */
#define CONFIG_SYS_MMC_ENV_PART 1 /* boot0 */
diff --git a/include/configs/warp.h b/include/configs/warp.h
index 9aa8a48..5345f53 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -23,7 +23,6 @@
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
-#define CONFIG_SUPPORT_EMMC_BOOT
/* Watchdog */
#define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 37649cf..0ef8e35 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -29,7 +29,6 @@
/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 37a9ae9..684faae 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -47,10 +47,6 @@
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_MAY_FAIL
-#if defined(CONFIG_MMC_SDHCI_ZYNQ)
-# define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
#ifdef CONFIG_NAND_ARASAN
# define CONFIG_SYS_MAX_NAND_DEVICE 1
# define CONFIG_SYS_NAND_ONFI_DETECTION
diff --git a/include/configs/xpress.h b/include/configs/xpress.h
index 08e0ca0..4cbf8aa 100644
--- a/include/configs/xpress.h
+++ b/include/configs/xpress.h
@@ -21,7 +21,6 @@
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
/* I2C configs */
#define CONFIG_SYS_I2C
diff --git a/include/configs/zc5202.h b/include/configs/zc5202.h
index 40d33f7..77ff047 100644
--- a/include/configs/zc5202.h
+++ b/include/configs/zc5202.h
@@ -12,8 +12,6 @@
#define CONSOLE_DEV "ttymxc1"
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
#include "el6x_common.h"
/* Ethernet */
diff --git a/include/configs/zc5601.h b/include/configs/zc5601.h
index b9673e2..e4fe7a4 100644
--- a/include/configs/zc5601.h
+++ b/include/configs/zc5601.h
@@ -13,8 +13,6 @@
#define CONSOLE_DEV "ttymxc1"
#define CONFIG_MMCROOT "/dev/mmcblk0p1"
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
#include "el6x_common.h"
/* Ethernet */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 48ef031..bc86b84 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1937,7 +1937,6 @@
CONFIG_SUNXI_GPIO
CONFIG_SUNXI_MAX_FB_SIZE
CONFIG_SUPERH_ON_CHIP_R8A66597
-CONFIG_SUPPORT_EMMC_BOOT
CONFIG_SUVD3
CONFIG_SXNI855T
CONFIG_SYSFLAGS_ADDR