Patches by Kshitij, 04 Jul 2003
- added support for arm925t cpu core
- added support for TI OMAP 1510 Innovator Board
diff --git a/CHANGELOG b/CHANGELOG
index cc1d8c7..5f56755 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
Changes for U-Boot 0.4.3:
======================================================================
+* Patches by Kshitij, 04 Jul 2003
+ - added support for arm925t cpu core
+ - added support for TI OMAP 1510 Innovator Board
+
* Patches by Martin Krause, 14 Jul 2003:
- add I2C support for s3c2400 systems (trab board)
- (re-) add "ping" to command table
diff --git a/MAINTAINERS b/MAINTAINERS
index 50b824b..69263ce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -274,6 +274,9 @@
smdk2400 ARM920T
trab ARM920T
+Kshitij Gupta <kshitij@ti.com>
+ omap1510inn ARM925T
+
David Müller <d.mueller@elsoft.ch>
smdk2410 ARM920T
diff --git a/MAKEALL b/MAKEALL
index ae49753..112971e 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -108,7 +108,7 @@
## ARM9 Systems
#########################################################################
-LIST_ARM9="at91rm9200dk smdk2400 smdk2410 trab VCMA9"
+LIST_ARM9="at91rm9200dk omap1510inn smdk2400 smdk2410 trab VCMA9"
#########################################################################
## Xscale Systems
diff --git a/Makefile b/Makefile
index 5efe4e9..c205630 100644
--- a/Makefile
+++ b/Makefile
@@ -720,11 +720,14 @@
@./mkconfig $(@:_config=) arm sa1100 shannon
#########################################################################
-## ARM920T Systems
+## ARM92xT Systems
#########################################################################
xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
+omap1510inn_config : unconfig
+ @./mkconfig $(@:_config=) arm arm925t omap1510inn
+
smdk2400_config : unconfig
@./mkconfig $(@:_config=) arm arm920t smdk2400
diff --git a/README b/README
index ab78984..8224128 100644
--- a/README
+++ b/README
@@ -140,12 +140,14 @@
- tools Tools to build S-Record or U-Boot images, etc.
- cpu/74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs
+- cpu/arm925t Files specific to ARM 925 CPUs
- cpu/mpc5xx Files specific to Motorola MPC5xx CPUs
- cpu/mpc8xx Files specific to Motorola MPC8xx CPUs
- cpu/mpc824x Files specific to Motorola MPC824x CPUs
- cpu/mpc8260 Files specific to Motorola MPC8260 CPU
- cpu/ppc4xx Files specific to IBM 4xx CPUs
+
- board/LEOX/ Files specific to boards manufactured by The LEOX team
- board/LEOX/elpt860 Files specific to ELPT860 boards
- board/RPXClassic
@@ -204,6 +206,8 @@
- board/mvs1 Files specific to MVS1 boards
- board/nx823 Files specific to NX823 boards
- board/oxc Files specific to OXC boards
+- board/omap1510inn
+ Files specific to OMAP 1510 Innovator boards
- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards
- board/pm826 Files specific to PM826 boards
- board/ppmc8260
@@ -353,6 +357,7 @@
CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312,
CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK,
+ CONFIG_INNOVATOROMAP1510,
CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410,
CONFIG_TRAB, CONFIG_AT91RM9200DK
@@ -1857,7 +1862,7 @@
GENIETV_config TQM823L_config PIP405_config
GEN860T_config EBONY_config FPS860L_config
ELPT860_config cmi_mpc5xx_config NETVIA_config
- at91rm9200dk_config
+ at91rm9200dk_config omap1510inn_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
diff --git a/board/omap1510inn/Makefile b/board/omap1510inn/Makefile
new file mode 100644
index 0000000..28996ba
--- /dev/null
+++ b/board/omap1510inn/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := omap1510innovator.o flash.o
+SOBJS := platform.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/omap1510inn/config.mk b/board/omap1510inn/config.mk
new file mode 100644
index 0000000..c5fd706
--- /dev/null
+++ b/board/omap1510inn/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2003
+# Texas Instruments, <www.ti.com>
+# Kshitij Gupta <Kshitij@ti.com>
+#
+# TI Innovator board with OMAP1510 (ARM925T) cpu
+# see http://www.ti.com/ for more information on Texas Insturments
+#
+# Innovator has 1 bank of 256 MB SDRAM
+# Physical Address:
+# 1000'0000 to 2000'0000
+#
+#
+# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved)
+#
+# we load ourself to 1100'0000
+#
+#
+
+
+TEXT_BASE = 0x11000000
diff --git a/board/omap1510inn/flash.c b/board/omap1510inn/flash.c
new file mode 100644
index 0000000..6b2739d
--- /dev/null
+++ b/board/omap1510inn/flash.c
@@ -0,0 +1,428 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) __swab16(x)
+#else
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) __swab32(x)
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ int i;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+ break;
+ default:
+ panic ("configured to many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F128J3A:
+ printf ("28F128J3A\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+ volatile FPW value;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
+
+ mb ();
+ value = addr[0];
+
+ switch (value) {
+
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ mb ();
+ value = addr[1]; /* device ID */
+ switch (value) {
+
+ case (FPW) INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x02000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /*start = get_timer (0); */
+ last = start;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ printf ("Erasing sector %2d ... ", sect);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ *addr = (FPW) 0x00500050; /* clear status register */
+ *addr = (FPW) 0x00200020; /* erase setup */
+ *addr = (FPW) 0x00D000D0; /* erase confirm */
+
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = (FPW) 0x00B000B0; /* suspend erase */
+ *addr = (FPW) 0x00FF00FF; /* reset to read mode */
+ rcode = 1;
+ break;
+ }
+ }
+
+ *addr = (FPW) 0x00500050; /* clear status register cmd. */
+ *addr = (FPW) 0x00FF00FF; /* resest to read mode */
+
+ printf (" done\n");
+ }
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel ();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ *addr = (FPW) 0x00400040; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
+
+void inline spin_wheel (void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf ("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/omap1510inn/omap1510innovator.c b/board/omap1510inn/omap1510innovator.c
new file mode 100644
index 0000000..eba010a
--- /dev/null
+++ b/board/omap1510inn/omap1510innovator.c
@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+static void flash__init (void);
+static void ether__init (void);
+
+static inline void delay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number of OMAP 1510-Board */
+ gd->bd->bi_arch_number = 234;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0x10000100;
+
+/* kk - this speeds up your boot a quite a bit. However to make it
+ * work, you need make sure your kernel startup flush bug is fixed.
+ * ... rkw ...
+ */
+ icache_enable ();
+
+ flash__init ();
+ ether__init ();
+ return 0;
+}
+
+
+int misc_init_r (void)
+{
+ /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
+ /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
+
+ /* setup gpio direction to match board (no floats!) */
+ /**gdir = 0xCFF9; */
+ /**mdir = 0x103F; */
+
+ return (0);
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+static void flash__init (void)
+{
+#define CS0_CHIP_SELECT_REG 0xfffecc10
+#define CS3_CHIP_SELECT_REG 0xfffecc1c
+#define EMIFS_GlB_Config_REG 0xfffecc0c
+
+ {
+ unsigned int regval;
+
+ regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
+ regval = regval | 0x0001; /* Turn off write protection for flash devices. */
+ if (regval & 0x0002) {
+ regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
+ /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
+ /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
+ /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
+ }
+ *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
+ }
+}
+
+
+/******************************
+ Routine:
+ Description:
+******************************/
+static void ether__init (void)
+{
+#define ETH_CONTROL_REG 0x0800000b
+ /* take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete.
+ */
+ *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
+ udelay (3);
+}
+
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
diff --git a/board/omap1510inn/platform.S b/board/omap1510inn/platform.S
new file mode 100644
index 0000000..6bad32d
--- /dev/null
+++ b/board/omap1510inn/platform.S
@@ -0,0 +1,386 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ *
+ * -- Some bits of code used from rrload's head_OMAP1510.s --
+ * Copyright (C) 2002 RidgeRun, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1510)
+#include <./configs/omap1510.h>
+#endif
+
+#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
+
+
+_TEXT_BASE:
+ .word TEXT_BASE /* sdram load addr from config.mk */
+
+.globl platformsetup
+platformsetup:
+
+ /*
+ * Configure 1510 pins functions to match our board.
+ */
+ ldr r0, REG_PULL_DWN_CTRL_0
+ ldr r1, VAL_PULL_DWN_CTRL_0
+ str r1, [r0]
+ ldr r0, REG_PULL_DWN_CTRL_1
+ ldr r1, VAL_PULL_DWN_CTRL_1
+ str r1, [r0]
+ ldr r0, REG_PULL_DWN_CTRL_2
+ ldr r1, VAL_PULL_DWN_CTRL_2
+ str r1, [r0]
+ ldr r0, REG_PULL_DWN_CTRL_3
+ ldr r1, VAL_PULL_DWN_CTRL_3
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_4
+ ldr r1, VAL_FUNC_MUX_CTRL_4
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_5
+ ldr r1, VAL_FUNC_MUX_CTRL_5
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_6
+ ldr r1, VAL_FUNC_MUX_CTRL_6
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_7
+ ldr r1, VAL_FUNC_MUX_CTRL_7
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_8
+ ldr r1, VAL_FUNC_MUX_CTRL_8
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_9
+ ldr r1, VAL_FUNC_MUX_CTRL_9
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_A
+ ldr r1, VAL_FUNC_MUX_CTRL_A
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_B
+ ldr r1, VAL_FUNC_MUX_CTRL_B
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_C
+ ldr r1, VAL_FUNC_MUX_CTRL_C
+ str r1, [r0]
+ ldr r0, REG_VOLTAGE_CTRL_0
+ ldr r1, VAL_VOLTAGE_CTRL_0
+ str r1, [r0]
+ ldr r0, REG_TEST_DBG_CTRL_0
+ ldr r1, VAL_TEST_DBG_CTRL_0
+ str r1, [r0]
+ ldr r0, REG_MOD_CONF_CTRL_0
+ ldr r1, VAL_MOD_CONF_CTRL_0
+ str r1, [r0]
+
+ /* Move to 1510 mode */
+ ldr r0, REG_COMP_MODE_CTRL_0
+ ldr r1, VAL_COMP_MODE_CTRL_0
+ str r1, [r0]
+
+ /* Set up Traffic Ctlr*/
+ ldr r0, REG_TC_IMIF_PRIO
+ mov r1, #0x0
+ str r1, [r0]
+ ldr r0, REG_TC_EMIFS_PRIO
+ str r1, [r0]
+ ldr r0, REG_TC_EMIFF_PRIO
+ str r1, [r0]
+
+ ldr r0, REG_TC_EMIFS_CONFIG
+ ldr r1, [r0]
+ bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */
+ bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */
+ str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */
+
+ /* Setup some clock domains */
+ ldr r1, =OMAP1510_CLKS
+ ldr r0, REG_ARM_IDLECT2
+ strh r1, [r0] /* CLKM, Clock domain control. */
+
+ mov r1, #0x01 /* PER_EN bit */
+ ldr r0, REG_ARM_RSTCT2
+ strh r1, [r0] /* CLKM; Peripheral reset. */
+
+ /* Set CLKM to Sync-Scalable */
+ /* I supposidly need to enable the dsp clock before switching */
+ mov r1, #0x1000
+ ldr r0, REG_ARM_SYSST
+ strh r1, [r0]
+ mov r0, #0x400
+1:
+ subs r0, r0, #0x1 /* wait for any bubbles to finish */
+ bne 1b
+
+ ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
+ ldr r0, REG_ARM_CKCTL
+ strh r1, [r0]
+
+ /* setup DPLL 1 */
+ ldr r1, VAL_DPLL1_CTL
+ ldr r0, REG_DPLL1_CTL
+ strh r1, [r0]
+ ands r1, r1, #0x10 /* Check if PLL is enabled. */
+ beq lock_end /* Do not look for lock if BYPASS selected */
+2:
+ ldrh r1, [r0]
+ ands r1, r1, #0x01 /* Check the LOCK bit. */
+ beq 2b /* ...loop until bit goes hi. */
+lock_end:
+
+ /* Set memory timings corresponding to the new clock speed */
+
+ /* Check execution location to determine current execution location
+ * and branch to appropriate initialization code.
+ */
+ mov r0, #0x10000000 /* Load physical SDRAM base. */
+ mov r1, pc /* Get current execution location. */
+ cmp r1, r0 /* Compare. */
+ bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */
+
+ /*
+ * Delay for SDRAM initialization.
+ */
+ mov r3, #0x1800 /* value should be checked */
+3:
+ subs r3, r3, #0x1 /* Decrement count */
+ bne 3b
+
+ /*
+ * Set SDRAM control values. Disable refresh before MRS command.
+ */
+ ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */
+ bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
+ orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */
+ orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */
+ ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
+ str r3, [r2] /* Store the passed value with AR disabled. */
+
+ ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */
+ ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */
+ str r1, [r2] /* Store the passed value.*/
+
+ ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
+ str r0, [r2] /* Store the passed value. */
+
+ /*
+ * Delay for SDRAM initialization.
+ */
+ mov r3, #0x1800
+4:
+ subs r3, r3, #1 /* Decrement count. */
+ bne 4b
+
+skip_sdram:
+
+ /* slow interface */
+ ldr r1, VAL_TC_EMIFS_CS0_CONFIG
+ ldr r0, REG_TC_EMIFS_CS0_CONFIG
+ str r1, [r0] /* Chip Select 0 */
+ ldr r1, VAL_TC_EMIFS_CS1_CONFIG
+ ldr r0, REG_TC_EMIFS_CS1_CONFIG
+ str r1, [r0] /* Chip Select 1 */
+ ldr r1, VAL_TC_EMIFS_CS2_CONFIG
+ ldr r0, REG_TC_EMIFS_CS2_CONFIG
+ str r1, [r0] /* Chip Select 2 */
+ ldr r1, VAL_TC_EMIFS_CS3_CONFIG
+ ldr r0, REG_TC_EMIFS_CS3_CONFIG
+ str r1, [r0] /* Chip Select 3 */
+
+ /* Next, Enable the RS232 Line Drivers in the FPGA. */
+ /* Also, power on the audio CODEC's amplifier here, */
+ /* which will make a noise on the audio output. */
+ /* This is done here instead of in the kernel so there */
+ /* isn't a loud popping noise at the start of each */
+ /* song. */
+ /* Also, disable the CODEC's clocks. */
+ /* omap1510-HelenP1 [specific] */
+
+ ldr r0, REG_FPGA_POWER
+ mov r1, #0
+ ldr r2, REG_FPGA_DIP_SWITCH
+ ldrb r3, [r2]
+ cmp r3, #0x8
+ movne r1, #0x62 /* Enable the RS232 Line Drivers in the EPLD */
+ strb r1, [r0]
+ ldr r0, REG_FPGA_AUDIO
+ mov r1, #0x0 /* Disable sound driver (CODEC clocks) */
+ strb r1, [r0]
+
+ /* back to arch calling code */
+ mov pc, lr
+
+/* the literal pools origin */
+ .ltorg
+
+/* OMAP configuration registers */
+REG_FUNC_MUX_CTRL_0: /* 32 bits */
+ .word 0xfffe1000
+REG_FUNC_MUX_CTRL_1: /* 32 bits */
+ .word 0xfffe1004
+REG_FUNC_MUX_CTRL_2: /* 32 bits */
+ .word 0xfffe1008
+REG_COMP_MODE_CTRL_0: /* 32 bits */
+ .word 0xfffe100c
+REG_FUNC_MUX_CTRL_3: /* 32 bits */
+ .word 0xfffe1010
+REG_FUNC_MUX_CTRL_4: /* 32 bits */
+ .word 0xfffe1014
+REG_FUNC_MUX_CTRL_5: /* 32 bits */
+ .word 0xfffe1018
+REG_FUNC_MUX_CTRL_6: /* 32 bits */
+ .word 0xfffe101c
+REG_FUNC_MUX_CTRL_7: /* 32 bits */
+ .word 0xfffe1020
+REG_FUNC_MUX_CTRL_8: /* 32 bits */
+ .word 0xfffe1024
+REG_FUNC_MUX_CTRL_9: /* 32 bits */
+ .word 0xfffe1028
+REG_FUNC_MUX_CTRL_A: /* 32 bits */
+ .word 0xfffe102C
+REG_FUNC_MUX_CTRL_B: /* 32 bits */
+ .word 0xfffe1030
+REG_FUNC_MUX_CTRL_C: /* 32 bits */
+ .word 0xfffe1034
+REG_FUNC_MUX_CTRL_D: /* 32 bits */
+ .word 0xfffe1038
+REG_PULL_DWN_CTRL_0: /* 32 bits */
+ .word 0xfffe1040
+REG_PULL_DWN_CTRL_1: /* 32 bits */
+ .word 0xfffe1044
+REG_PULL_DWN_CTRL_2: /* 32 bits */
+ .word 0xfffe1048
+REG_PULL_DWN_CTRL_3: /* 32 bits */
+ .word 0xfffe104c
+REG_VOLTAGE_CTRL_0: /* 32 bits */
+ .word 0xfffe1060
+REG_TEST_DBG_CTRL_0: /* 32 bits */
+ .word 0xfffe1070
+REG_MOD_CONF_CTRL_0: /* 32 bits */
+ .word 0xfffe1080
+REG_TC_IMIF_PRIO: /* 32 bits */
+ .word 0xfffecc00
+REG_TC_EMIFS_PRIO: /* 32 bits */
+ .word 0xfffecc04
+REG_TC_EMIFF_PRIO: /* 32 bits */
+ .word 0xfffecc08
+REG_TC_EMIFS_CONFIG: /* 32 bits */
+ .word 0xfffecc0c
+REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
+ .word 0xfffecc10
+REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
+ .word 0xfffecc14
+REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
+ .word 0xfffecc18
+REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
+ .word 0xfffecc1c
+REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */
+ .word 0xfffecc20
+REG_TC_EMIFF_MRS: /* 32 bits */
+ .word 0xfffecc24
+/* MPU clock/reset/power mode control registers */
+REG_ARM_CKCTL: /* 16 bits */
+ .word 0xfffece00
+REG_ARM_IDLECT2: /* 16 bits */
+ .word 0xfffece08
+REG_ARM_RSTCT2: /* 16 bits */
+ .word 0xfffece14
+REG_ARM_SYSST: /* 16 bits */
+ .word 0xfffece18
+/* DPLL control registers */
+REG_DPLL1_CTL: /* 16 bits */
+ .word 0xfffecf00
+/* identification code register */
+REG_IDCODE: /* 32 bits */
+ .word 0xfffed404
+
+/* Innovator specific */
+REG_FPGA_LED_DIGIT: /* 8 bits (not used on Innovator) */
+ .word 0x08000003
+REG_FPGA_POWER: /* 8 bits */
+ .word 0x08000005
+REG_FPGA_AUDIO: /* 8 bits (not used on Innovator) */
+ .word 0x0800000c
+REG_FPGA_DIP_SWITCH: /* 8 bits (not used on Innovator) */
+ .word 0x0800000e
+
+VAL_COMP_MODE_CTRL_0:
+ .word 0x0000eaef
+VAL_FUNC_MUX_CTRL_4:
+ .word 0x00000000
+VAL_FUNC_MUX_CTRL_5:
+ .word 0x00000000
+VAL_FUNC_MUX_CTRL_6:
+ .word 0x00000001
+VAL_FUNC_MUX_CTRL_7:
+ .word 0x00000000
+VAL_FUNC_MUX_CTRL_8:
+ .word 0x10001200
+VAL_FUNC_MUX_CTRL_9:
+ .word 0x01201012
+VAL_FUNC_MUX_CTRL_A:
+ .word 0x00000248
+VAL_FUNC_MUX_CTRL_B:
+ .word 0x00000248
+VAL_FUNC_MUX_CTRL_C:
+ .word 0x09000000
+VAL_FUNC_MUX_CTRL_D:
+ .word 0x00000000
+VAL_PULL_DWN_CTRL_0:
+ .word 0x11a10000
+VAL_PULL_DWN_CTRL_1:
+ .word 0x2e047fff
+VAL_PULL_DWN_CTRL_2:
+ .word 0xffd7d3e6
+VAL_PULL_DWN_CTRL_3:
+ .word 0x00003f03
+VAL_VOLTAGE_CTRL_0:
+ .word 0x00000007
+VAL_TEST_DBG_CTRL_0:
+ /* See Errata 4.13, This works around a SRAM bug, for chips below ES2.5 .
+ * This slows down internal SRAM accesses.
+ */
+ .word 0x00000007
+VAL_MOD_CONF_CTRL_0:
+ .word 0x0b000008
+VAL_ARM_CKCTL:
+ .word 0x010f
+VAL_DPLL1_CTL:
+ .word 0x2710
+VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
+ .word 0x00001149
+VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
+ .word 0x00004158
+VAL_TC_EMIFS_CS0_CONFIG:
+ .word 0x002130b0
+VAL_TC_EMIFS_CS1_CONFIG:
+ .word 0x0000f559
+VAL_TC_EMIFS_CS2_CONFIG:
+ .word 0x000055f0
+VAL_TC_EMIFS_CS3_CONFIG:
+ .word 0x00003331
+VAL_TC_EMIFF_SDRAM_CONFIG:
+ .word 0x010290fc
+VAL_TC_EMIFF_MRS:
+ .word 0x00000027
diff --git a/board/omap1510inn/u-boot.lds b/board/omap1510inn/u-boot.lds
new file mode 100644
index 0000000..caa1d24
--- /dev/null
+++ b/board/omap1510inn/u-boot.lds
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm925t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ armboot_end_data = .;
+
+ . = ALIGN(4);
+ .bss : { *(.bss) }
+
+ armboot_end = .;
+}
diff --git a/cpu/arm925t/Makefile b/cpu/arm925t/Makefile
new file mode 100644
index 0000000..a1db818
--- /dev/null
+++ b/cpu/arm925t/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o
+OBJS = interrupts.o cpu.o omap925.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/arm925t/config.mk b/cpu/arm925t/config.mk
new file mode 100644
index 0000000..cef7d26
--- /dev/null
+++ b/cpu/arm925t/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+ -mshort-load-bytes -msoft-float
+
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
diff --git a/cpu/arm925t/cpu.c b/cpu/arm925t/cpu.c
new file mode 100644
index 0000000..c55fbc7
--- /dev/null
+++ b/cpu/arm925t/cpu.c
@@ -0,0 +1,159 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm925t.h>
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+ unsigned long value;
+
+ __asm__ __volatile__(
+ "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
+ : "=r" (value)
+ :
+ : "memory");
+
+#ifdef MMU_DEBUG
+ printf ("p15/c1 is = %08lx\n", value);
+#endif
+ return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+#ifdef MMU_DEBUG
+ printf ("write %08lx to p15/c1\n", value);
+#endif
+ __asm__ __volatile__(
+ "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
+ :
+ : "r" (value)
+ : "memory");
+
+ read_p15_c1 ();
+}
+
+static void cp_delay (void)
+{
+ volatile int i;
+
+ /* Many OMAP regs need at least 2 nops */
+ for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU (1<<0) /* mmu off/on */
+#define C1_ALIGN (1<<1) /* alignment faults off/on */
+#define C1_DC (1<<2) /* dcache off/on */
+#define C1_WB (1<<3) /* merging write buffer on/off */
+#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
+#define C1_SYS_PROT (1<<8) /* system protection */
+#define C1_ROM_PROT (1<<9) /* ROM protection */
+#define C1_IC (1<<12) /* icache off/on */
+#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
+
+int cpu_init (void)
+{
+ /*
+ * setup up stack if necessary
+ */
+#ifdef CONFIG_USE_IRQ
+ IRQ_STACK_START = _armboot_end +
+ CONFIG_STACKSIZE + CONFIG_STACKSIZE_IRQ - 4;
+ FIQ_STACK_START = IRQ_STACK_START + CONFIG_STACKSIZE_FIQ;
+ _armboot_real_end = FIQ_STACK_START + 4;
+#else
+ _armboot_real_end = _armboot_end + CONFIG_STACKSIZE;
+#endif /* CONFIG_USE_IRQ */
+ return (0);
+}
+
+int cleanup_before_linux (void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+
+ unsigned long i;
+
+ disable_interrupts ();
+
+ /* turn off I/D-cache */
+ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+ i &= ~(C1_DC | C1_IC);
+ asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+ /* flush I/D-cache */
+ i = 0;
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+ return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ extern void reset_cpu (ulong addr);
+
+ disable_interrupts ();
+ reset_cpu (0);
+ /*NOTREACHED*/
+ return (0);
+}
+
+void icache_enable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 (); /* get control reg. */
+ cp_delay ();
+ write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+ return (read_p15_c1 () & C1_IC) != 0;
+}
diff --git a/cpu/arm925t/interrupts.c b/cpu/arm925t/interrupts.c
new file mode 100644
index 0000000..ed8a1c7
--- /dev/null
+++ b/cpu/arm925t/interrupts.c
@@ -0,0 +1,301 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm925t.h>
+#include <configs/omap1510.h>
+
+#include <asm/proc-armv/ptrace.h>
+
+extern void reset_cpu(ulong addr);
+#define TIMER_LOAD_VAL 0xffffffff
+
+/* macro to read the 32 bit timer */
+#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8))
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+ unsigned long temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "bic %0, %0, #0x80\n"
+ "msr cpsr_c, %0"
+ : "=r" (temp)
+ :
+ : "memory");
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+ unsigned long old,temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "orr %1, %0, #0xc0\n"
+ "msr cpsr_c, %1"
+ : "=r" (old), "=r" (temp)
+ :
+ : "memory");
+ return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+ return;
+}
+int disable_interrupts (void)
+{
+ return 0;
+}
+#endif
+
+
+
+void bad_mode (void)
+{
+ panic ("Resetting CPU ...\n");
+ reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+ unsigned long flags;
+ const char *processor_modes[] = {
+ "USER_26", "FIQ_26", "IRQ_26", "SVC_26",
+ "UK4_26", "UK5_26", "UK6_26", "UK7_26",
+ "UK8_26", "UK9_26", "UK10_26", "UK11_26",
+ "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+ "USER_32", "FIQ_32", "IRQ_32", "SVC_32",
+ "UK4_32", "UK5_32", "UK6_32", "ABT_32",
+ "UK8_32", "UK9_32", "UK10_32", "UND_32",
+ "UK12_32", "UK13_32", "UK14_32", "SYS_32",
+ };
+
+ flags = condition_codes (regs);
+
+ printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
+ "sp : %08lx ip : %08lx fp : %08lx\n",
+ instruction_pointer (regs),
+ regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+ printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
+ regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+ printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+ regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+ printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+ regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+ printf ("Flags: %c%c%c%c",
+ flags & CC_N_BIT ? 'N' : 'n',
+ flags & CC_Z_BIT ? 'Z' : 'z',
+ flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+ printf (" IRQs %s FIQs %s Mode %s%s\n",
+ interrupts_enabled (regs) ? "on" : "off",
+ fast_interrupts_enabled (regs) ? "on" : "off",
+ processor_modes[processor_mode (regs)],
+ thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+ printf ("undefined instruction\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+ printf ("software interrupt\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+ printf ("prefetch abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+ printf ("data abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+ printf ("not used\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+ printf ("fast interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+ printf ("interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+static ulong timestamp;
+static ulong lastdec;
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int interrupt_init (void)
+{
+ int32_t val;
+
+ *((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
+ val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
+ *((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
+ return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+ return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+ timestamp = t;
+}
+
+/* very rough timer... */
+void udelay (unsigned long usec)
+{
+#ifdef CONFIG_INNOVATOROMAP1510
+#define LOOPS_PER_MSEC 60 /* tuned on omap1510 */
+ volatile int i, time_remaining = LOOPS_PER_MSEC * usec;
+
+ for (i = time_remaining; i > 0; i--) {
+ }
+#else
+
+ ulong tmo;
+
+ tmo = usec / 1000;
+ tmo *= CFG_HZ;
+ tmo /= 1000;
+
+ tmo += get_timer (0);
+
+ while (get_timer_masked () < tmo)
+ /*NOP*/;
+#endif
+}
+
+void reset_timer_masked (void)
+{
+ /* reset time */
+ lastdec = READ_TIMER;
+ timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+ ulong now = READ_TIMER; /* current tick value */
+
+ if (lastdec >= now) { /* did I roll (rem decrementer) */
+ /* normal mode */
+ timestamp += lastdec - now; /* record amount of time since last check */
+ } else {
+ /* we have an overflow ... */
+ timestamp += lastdec + TIMER_LOAD_VAL - now;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+#ifdef CONFIG_INNOVATOROMAP1510
+ #define LOOPS_PER_MSEC 60 /* tuned on omap1510 */
+ volatile int i, time_remaining = LOOPS_PER_MSEC*usec;
+ for (i=time_remaining; i>0; i--) { }
+#else
+
+ ulong tmo;
+
+ tmo = usec / 1000;
+ tmo *= CFG_HZ;
+ tmo /= 1000;
+
+ reset_timer_masked ();
+
+ while (get_timer_masked () < tmo)
+ /*NOP*/;
+#endif
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{ /* poor timer, may need to improve especiall for bootp. */
+ ulong tbclk;
+
+ tbclk = CFG_HZ;
+ return tbclk;
+}
diff --git a/cpu/arm925t/omap925.c b/cpu/arm925t/omap925.c
new file mode 100644
index 0000000..1166ca6
--- /dev/null
+++ b/cpu/arm925t/omap925.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm925t.h>
+
+ushort gpioreserved;
+
+void gpioreserve(ushort mask)
+{
+ gpioreserved |= mask;
+}
+
+void gpiosetdir(ushort mask, ushort in)
+{
+ *(ushort *)GPIO_DIR_CONTROL_REG = (*(ushort *)GPIO_DIR_CONTROL_REG & ~mask) | (in & mask);
+}
+
+
+void gpiosetout(ushort mask, ushort out)
+{
+ ushort *r_ptr, r_val;
+
+ r_ptr = (ushort *)GPIO_DATA_OUTPUT_REG; /* set pointer */
+ r_val = *r_ptr & ~mask; /* get previous val, clear bits we want to change */
+ r_val |= (out & mask); /* set specified bits in value + plus origional ones */
+ *r_ptr = r_val; /* write it out */
+/*
+ * gcc screwed this one up :(.
+ *
+ * *(ushort *)GPIO_DATA_OUTPUT_REG = (*(ushort *)GPIO_DATA_OUTPUT_REG & ~mask) | (out & mask);
+ */
+
+}
+
+void gpioinit(void)
+{
+}
+
+
+#define MIF_CONFIG_REG 0xFFFECC0C
+#define FLASH_GLOBAL_CTRL_NWP 1
+
+void archflashwp (void *archdata, int wp)
+{
+ ulong *fgc = (ulong *) MIF_CONFIG_REG;
+
+ if (wp == 1)
+ *fgc &= ~FLASH_GLOBAL_CTRL_NWP;
+ else
+ *fgc |= FLASH_GLOBAL_CTRL_NWP;
+}
diff --git a/cpu/arm925t/start.S b/cpu/arm925t/start.S
new file mode 100644
index 0000000..2115fb3
--- /dev/null
+++ b/cpu/arm925t/start.S
@@ -0,0 +1,424 @@
+/*
+ * armboot - Startup Code for ARM925 CPU-core
+ *
+ * Copyright (c) 2003 Texas Instruments
+ *
+ * ----- Adapted for OMAP1510 from ARM920 code ------
+ *
+ * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
+ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1510)
+#include <./configs/omap1510.h>
+#endif
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start: b reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction: .word undefined_instruction
+_software_interrupt: .word software_interrupt
+_prefetch_abort: .word prefetch_abort
+_data_abort: .word data_abort
+_not_used: .word not_used
+_irq: .word irq
+_fiq: .word fiq
+
+ .balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+/*
+ * CFG_MEM_END is in the board dependent config-file (configs/config_BOARD.h)
+ */
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+ .word _start
+
+/*
+ * Note: _armboot_end_data and _armboot_end are defined
+ * by the (board-dependent) linker script.
+ * _armboot_end_data is the first usable FLASH address after armboot
+ */
+.globl _armboot_end_data
+_armboot_end_data:
+ .word armboot_end_data
+.globl _armboot_end
+_armboot_end:
+ .word armboot_end
+
+/*
+ * _armboot_real_end is the first usable RAM address behind armboot
+ * and the various stacks
+ */
+.globl _armboot_real_end
+_armboot_real_end:
+ .word 0x0badc0de
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+ /*
+ * Set up 925T mode
+ */
+ mov r1, #0x81 /* Set ARM925T configuration. */
+ mcr p15, 0, r1, c15, c1, 0 /* Write ARM925T configuration register. */
+
+ /*
+ * turn off the watchdog, unlock/diable sequence
+ */
+ mov r1, #0xF5
+ ldr r0, =WDTIM_MODE
+ strh r1, [r0]
+ mov r1, #0xA0
+ strh r1, [r0]
+
+ /*
+ * mask all IRQs by setting all bits in the INTMR - default
+ */
+ mov r1, #0xffffffff
+ ldr r0, =REG_IHL1_MIR
+ str r1, [r0]
+ ldr r0, =REG_IHL2_MIR
+ str r1, [r0]
+
+ /*
+ * wait for dpll to lock
+ */
+ ldr r0, =CK_DPLL1
+ mov r1, #0x10
+ strh r1, [r0]
+poll1:
+ ldrh r1, [r0]
+ ands r1, r1, #0x01
+ beq poll1
+ bl cpu_init_crit
+
+relocate:
+ /*
+ * relocate armboot to RAM
+ */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r2, _armboot_start
+ ldr r3, _armboot_end
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ ldr r1, _TEXT_BASE /* r1 <- destination address */
+ add r2, r0, r2 /* r2 <- source end address */
+
+ /*
+ * r0 = source address
+ * r1 = target address
+ * r2 = source end address
+ */
+copy_loop:
+ ldmia r0!, {r3-r10}
+ stmia r1!, {r3-r10}
+ cmp r0, r2
+ ble copy_loop
+
+ /* set up the stack */
+ ldr r0, _armboot_end
+ add r0, r0, #CONFIG_STACKSIZE
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
+ ldr pc, _start_armboot
+
+_start_armboot: .word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+cpu_init_crit:
+ /*
+ * flush v4 I/D caches
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
+ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
+ orr r0, r0, #0x00000002 @ set bit 2 (A) Align
+ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
+ mcr p15, 0, r0, c1, c0, 0
+
+ /*
+ * Go setup Memory and board specific bits prior to relocation.
+ */
+ mov ip, lr /* perserve link reg across call */
+ bl platformsetup /* go setup pll,mux,memory */
+ mov lr, ip /* restore link */
+ mov pc, lr /* back to my caller */
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
+ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
+
+ ldr r2, _armboot_end @ find top of stack
+ add r2, r2, #CONFIG_STACKSIZE @ find base of normal stack
+ sub r2, r2, #8 @ set base 2 words into abort stack
+ ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
+ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
+
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp @ save current stack into r0 (param register)
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, _armboot_end @ get bottom of stack (into sp by by user stack pointer).
+ add r13, r13, #CONFIG_STACKSIZE @ head to reserved words at the top of the stack
+ sub r13, r13, #8 @ reserved a couple spots in abort stack
+
+ str lr, [r13] @ save caller lr in position 0 of saved stack
+ mrs lr, spsr @ get the spsr
+ str lr, [r13, #4] @ save spsr in position 1 of saved stack
+
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13 @ switch modes, make sure moves will execute
+ mov lr, pc @ capture return pc
+ movs pc, lr @ jump to next instruction & switch modes.
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+
+/*
+ * exception handlers
+ */
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif
+
+ .align 5
+.globl reset_cpu
+reset_cpu:
+ ldr r1, rstctl1 /* get clkm1 reset ctl */
+ mov r3, #0x0
+ strh r3, [r1] /* clear it */
+ mov r3, #0x8
+ strh r3, [r1] /* force dsp+arm reset */
+_loop_forever:
+ b _loop_forever
+rstctl1:
+ .word 0xfffece10
diff --git a/drivers/ns16550.c b/drivers/ns16550.c
index 6f818d7..9344a0a 100644
--- a/drivers/ns16550.c
+++ b/drivers/ns16550.c
@@ -17,12 +17,19 @@
void NS16550_init (NS16550_t com_port, int baud_divisor)
{
com_port->ier = 0x00;
+#ifdef CONFIG_OMAP1510
+ com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
+#endif
com_port->lcr = LCR_BKSE | LCRVAL;
com_port->dll = baud_divisor & 0xff;
com_port->dlm = (baud_divisor >> 8) & 0xff;
com_port->lcr = LCRVAL;
com_port->mcr = MCRVAL;
com_port->fcr = FCRVAL;
+#ifdef CONFIG_OMAP1510
+ com_port->mdr1 = 0; /* select uart mode */
+#endif
+
}
void NS16550_reinit (NS16550_t com_port, int baud_divisor)
diff --git a/drivers/serial.c b/drivers/serial.c
index 36d0e6e..f28ad80 100644
--- a/drivers/serial.c
+++ b/drivers/serial.c
@@ -42,12 +42,22 @@
#error no valid console defined
#endif
-int serial_init (void)
+static int calc_divisor (void)
{
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_OMAP1510
+ /* If can't cleanly clock 115200 set div to 1 */
+ if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
+ console->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
+ return (1); /* return 1 for base divisor */
+ }
+#endif
+ return (CFG_NS16550_CLK / 16 / gd->baudrate);
+}
- int clock_divisor = (CFG_NS16550_CLK + gd->baudrate * 8 )
- / (gd->baudrate * 16);
+int serial_init (void)
+{
+ int clock_divisor = calc_divisor();
#ifdef CFG_NS87308
initialise_ns87308();
@@ -91,10 +101,9 @@
void
serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
+ int clock_divisor;
- int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
-
+ clock_divisor = calc_divisor();
NS16550_reinit(console, clock_divisor);
}
diff --git a/include/arm925t.h b/include/arm925t.h
new file mode 100644
index 0000000..ab343ea
--- /dev/null
+++ b/include/arm925t.h
@@ -0,0 +1,15 @@
+/************************************************
+ * NAME : arm925t.h
+ * Version : 23 June 2003 *
+ ************************************************/
+
+#ifndef __ARM925T_H__
+#define __ARM925T_H__
+
+void gpioreserve(ushort mask);
+void gpiosetdir(ushort mask, ushort in);
+void gpiosetout(ushort mask, ushort out);
+void gpioinit(void);
+void archflashwp(void *archdata, int wp);
+
+#endif /*__ARM925T_H__*/
diff --git a/include/asm-arm/arch-arm925t/sizes.h b/include/asm-arm/arch-arm925t/sizes.h
new file mode 100644
index 0000000..7319bd9
--- /dev/null
+++ b/include/asm-arm/arch-arm925t/sizes.h
@@ -0,0 +1,50 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ * from .s file by awk -f s2h.awk
+ */
+/* Size defintions
+ * Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h 1
+
+/* handy sizes */
+#define SZ_1K 0x00000400
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif /* __sizes_h */
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index d427d80..717ba35 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -220,6 +220,19 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
+/*----------------------------------------------------------------------*/
+#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
+#undef CONFIG_MODEM_SUPPORT_DEBUG
+
+#define CONFIG_MODEM_KEY_MAGIC "3C+3F" /* press F3 + F6 keys to enable modem */
+#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
+#if 0
+#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */
+#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
+#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */
+#endif
+/*----------------------------------------------------------------------*/
+
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
@@ -576,9 +589,4 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
-#undef CONFIG_MODEM_SUPPORT_DEBUG
-
-#define CONFIG_MODEM_KEY_MAGIC "3C+3F" /* press F3 + F6 keys to enable modem */
-#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
#endif /* __CONFIG_H */
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
new file mode 100644
index 0000000..001e21a
--- /dev/null
+++ b/include/configs/omap1510.h
@@ -0,0 +1,687 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * OMAP hardware map
+ *
+ * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
+ * Author: RidgeRun, Inc.
+ * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/arch/sizes.h>
+
+/*
+ There are 2 sets of general I/O -->
+ 1. GPIO (shared between ARM & DSP, configured by ARM)
+ 2. MPUIO which can be used only by the ARM.
+
+ Base address FFFB:5000 is where the ARM accesses the MPUIO control registers
+ (see 7.2.2 of the TRM for MPUIO reg definitions).
+
+ Base address E101:5000 is reserved for ARM access of the same MPUIO control
+ regs, but via the DSP I/O map. This address is unavailable on 1510.
+
+ Base address FFFC:E000 is where the ARM accesses the GPIO config registers
+ directly via its own peripheral bus.
+
+ Base address E101:E000 is where the ARM can access the same GPIO config
+ registers, but the access takes place through the ARM port interface (called
+ API or MPUI) via the DSP's peripheral bus (DSP I/O space).
+
+ Therefore, the ARM should setup the GPIO regs thru the FFFC:E000 addresses
+ instead of the E101:E000 addresses. The DSP has only read access of the pin
+ control register, so this may explain the inability to write to E101:E018.
+ Try accessing pin control reg at FFFC:E018.
+ */
+#define OMAP1510_GPIO_BASE 0xfffce000
+#define OMAP1510_GPIO_START OMAP1510_GPIO_BASE
+#define OMAP1510_GPIO_SIZE SZ_4K
+
+#define OMAP1510_MCBSP1_BASE 0xE1011000
+#define OMAP1510_MCBSP1_SIZE SZ_4K
+#define OMAP1510_MCBSP1_START 0xE1011000
+
+#define OMAP1510_MCBSP2_BASE 0xFFFB1000
+
+#define OMAP1510_MCBSP3_BASE 0xE1017000
+#define OMAP1510_MCBSP3_SIZE SZ_4K
+#define OMAP1510_MCBSP3_START 0xE1017000
+
+/*
+ * Where's the flush address (for flushing D and I cache?)
+ */
+#define FLUSH_BASE 0xdf000000
+#define FLUSH_BASE_PHYS 0x00000000
+
+#ifndef __ASSEMBLER__
+
+#define PCIO_BASE 0
+
+/*
+ * RAM definitions
+ */
+#define MAPTOPHYS(a) ((unsigned long)(a) - PAGE_OFFSET)
+#define KERNTOPHYS(a) ((unsigned long)(&a))
+#define KERNEL_BASE (0x10008000)
+#endif
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x))
+
+/* ----------------------------------------------------------------------------
+ * OMAP1510 system registers
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1510_UART1_BASE 0xfffb0000 /* "BLUETOOTH-UART" */
+#define OMAP1510_UART2_BASE 0xfffb0800 /* "MODEM-UART" */
+#define OMAP1510_RTC_BASE 0xfffb4800 /* RTC */
+#define OMAP1510_UART3_BASE 0xfffb9800 /* Shared MPU/DSP UART */
+#define OMAP1510_COM_MCBSP2_BASE 0xffff1000 /* Com McBSP2 */
+#define OMAP1510_AUDIO_MCBSP_BASE 0xffff1800 /* Audio McBSP2 */
+#define OMAP1510_ARMIO_BASE 0xfffb5000 /* keyboard/gpio */
+
+/*
+ * OMAP1510 UART3 Registers
+ */
+
+#define OMAP_MPU_UART3_BASE 0xFFFB9800 /* UART3 through MPU bus */
+
+/* UART3 Registers Maping through MPU bus */
+
+#define UART3_RHR (OMAP_MPU_UART3_BASE + 0)
+#define UART3_THR (OMAP_MPU_UART3_BASE + 0)
+#define UART3_DLL (OMAP_MPU_UART3_BASE + 0)
+#define UART3_IER (OMAP_MPU_UART3_BASE + 4)
+#define UART3_DLH (OMAP_MPU_UART3_BASE + 4)
+#define UART3_IIR (OMAP_MPU_UART3_BASE + 8)
+#define UART3_FCR (OMAP_MPU_UART3_BASE + 8)
+#define UART3_EFR (OMAP_MPU_UART3_BASE + 8)
+#define UART3_LCR (OMAP_MPU_UART3_BASE + 0x0C)
+#define UART3_MCR (OMAP_MPU_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1 (OMAP_MPU_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2 (OMAP_MPU_UART3_BASE + 0x14)
+#define UART3_LSR (OMAP_MPU_UART3_BASE + 0x14)
+#define UART3_TCR (OMAP_MPU_UART3_BASE + 0x18)
+#define UART3_MSR (OMAP_MPU_UART3_BASE + 0x18)
+#define UART3_XOFF1 (OMAP_MPU_UART3_BASE + 0x18)
+#define UART3_XOFF2 (OMAP_MPU_UART3_BASE + 0x1C)
+#define UART3_SPR (OMAP_MPU_UART3_BASE + 0x1C)
+#define UART3_TLR (OMAP_MPU_UART3_BASE + 0x1C)
+#define UART3_MDR1 (OMAP_MPU_UART3_BASE + 0x20)
+#define UART3_MDR2 (OMAP_MPU_UART3_BASE + 0x24)
+#define UART3_SFLSR (OMAP_MPU_UART3_BASE + 0x28)
+#define UART3_TXFLL (OMAP_MPU_UART3_BASE + 0x28)
+#define UART3_RESUME (OMAP_MPU_UART3_BASE + 0x2C)
+#define UART3_TXFLH (OMAP_MPU_UART3_BASE + 0x2C)
+#define UART3_SFREGL (OMAP_MPU_UART3_BASE + 0x30)
+#define UART3_RXFLL (OMAP_MPU_UART3_BASE + 0x30)
+#define UART3_SFREGH (OMAP_MPU_UART3_BASE + 0x34)
+#define UART3_RXFLH (OMAP_MPU_UART3_BASE + 0x34)
+#define UART3_BLR (OMAP_MPU_UART3_BASE + 0x38)
+#define UART3_ACREG (OMAP_MPU_UART3_BASE + 0x3C)
+#define UART3_DIV16 (OMAP_MPU_UART3_BASE + 0x3C)
+#define UART3_SCR (OMAP_MPU_UART3_BASE + 0x40)
+#define UART3_SSR (OMAP_MPU_UART3_BASE + 0x44)
+#define UART3_EBLR (OMAP_MPU_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL (OMAP_MPU_UART3_BASE + 0x4C)
+#define UART3_MVR (OMAP_MPU_UART3_BASE + 0x50)
+
+/*
+ * Configuration Registers
+ */
+#define FUNC_MUX_CTRL_0 0xfffe1000
+#define FUNC_MUX_CTRL_1 0xfffe1004
+#define FUNC_MUX_CTRL_2 0xfffe1008
+#define COMP_MODE_CTRL_0 0xfffe100c
+#define FUNC_MUX_CTRL_3 0xfffe1010
+#define FUNC_MUX_CTRL_4 0xfffe1014
+#define FUNC_MUX_CTRL_5 0xfffe1018
+#define FUNC_MUX_CTRL_6 0xfffe101C
+#define FUNC_MUX_CTRL_7 0xfffe1020
+#define FUNC_MUX_CTRL_8 0xfffe1024
+#define FUNC_MUX_CTRL_9 0xfffe1028
+#define FUNC_MUX_CTRL_A 0xfffe102C
+#define FUNC_MUX_CTRL_B 0xfffe1030
+#define FUNC_MUX_CTRL_C 0xfffe1034
+#define FUNC_MUX_CTRL_D 0xfffe1038
+#define PULL_DWN_CTRL_0 0xfffe1040
+#define PULL_DWN_CTRL_1 0xfffe1044
+#define PULL_DWN_CTRL_2 0xfffe1048
+#define PULL_DWN_CTRL_3 0xfffe104c
+#define GATE_INH_CTRL_0 0xfffe1050
+#define VOLTAGE_CTRL_0 0xfffe1060
+#define TEST_DBG_CTRL_0 0xfffe1070
+
+#define MOD_CONF_CTRL_0 0xfffe1080
+
+/*
+ * Traffic Controller Memory Interface Registers
+ */
+#define TCMIF_BASE 0xfffecc00
+#define IMIF_PRIO (TCMIF_BASE + 0x00)
+#define EMIFS_PRIO_REG (TCMIF_BASE + 0x04)
+#define EMIFF_PRIO_REG (TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG_REG (TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20)
+#define EMIFF_MRS (TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1 (TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3 (TCMIF_BASE + 0x30)
+#define TC_ENDIANISM (TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40)
+
+/*
+ * LCD Panel
+ */
+#define TI925_LCD_BASE 0xFFFEC000
+#define TI925_LCD_CONTROL (TI925_LCD_BASE)
+#define TI925_LCD_TIMING0 (TI925_LCD_BASE+0x4)
+#define TI925_LCD_TIMING1 (TI925_LCD_BASE+0x8)
+#define TI925_LCD_TIMING2 (TI925_LCD_BASE+0xc)
+#define TI925_LCD_STATUS (TI925_LCD_BASE+0x10)
+#define TI925_LCD_SUBPANEL (TI925_LCD_BASE+0x14)
+
+#define OMAP_LCD_CONTROL TI925_LCD_CONTROL
+
+/*
+ * MMC/SD Host Controller Registers
+ */
+
+#define OMAP_MMC_CMD 0xFFFB7800 /* MMC Command */
+#define OMAP_MMC_ARGL 0xFFFB7804 /* MMC argument low */
+#define OMAP_MMC_ARGH 0xFFFB7808 /* MMC argument high */
+#define OMAP_MMC_CON 0xFFFB780C /* MMC system configuration */
+#define OMAP_MMC_STAT 0xFFFB7810 /* MMC status */
+#define OMAP_MMC_IE 0xFFFB7814 /* MMC system interrupt enable */
+#define OMAP_MMC_CTO 0xFFFB7818 /* MMC command time-out */
+#define OMAP_MMC_DTO 0xFFFB781C /* MMC data time-out */
+#define OMAP_MMC_DATA 0xFFFB7820 /* MMC TX/RX FIFO data */
+#define OMAP_MMC_BLEN 0xFFFB7824 /* MMC block length */
+#define OMAP_MMC_NBLK 0xFFFB7828 /* MMC number of blocks */
+#define OMAP_MMC_BUF 0xFFFB782C /* MMC buffer configuration */
+#define OMAP_MMC_SPI 0xFFFB7830 /* MMC serial port interface */
+#define OMAP_MMC_SDIO 0xFFFB7834 /* MMC SDIO mode configuration */
+#define OMAP_MMC_SYST 0xFFFB7838 /* MMC system test */
+#define OMAP_MMC_REV 0xFFFB783C /* MMC module version */
+#define OMAP_MMC_RSP0 0xFFFB7840 /* MMC command response 0 */
+#define OMAP_MMC_RSP1 0xFFFB7844 /* MMC command response 1 */
+#define OMAP_MMC_RSP2 0xFFFB7848 /* MMC command response 2 */
+#define OMAP_MMC_RSP3 0xFFFB784C /* MMC command response 3 */
+#define OMAP_MMC_RSP4 0xFFFB7850 /* MMC command response 4 */
+#define OMAP_MMC_RSP5 0xFFFB7854 /* MMC command response 5 */
+#define OMAP_MMC_RSP6 0xFFFB7858 /* MMC command response 6 */
+#define OMAP_MMC_RSP7 0xFFFB785C /* MMC command response 4 */
+
+/* MMC masks */
+
+#define OMAP_MMC_END_OF_CMD (1 << 0) /* End of command phase */
+#define OMAP_MMC_CARD_BUSY (1 << 2) /* Card enter busy state */
+#define OMAP_MMC_BLOCK_RS (1 << 3) /* Block received/sent */
+#define OMAP_MMC_EOF_BUSY (1 << 4) /* Card exit busy state */
+#define OMAP_MMC_DATA_TIMEOUT (1 << 5) /* Data response time-out */
+#define OMAP_MMC_DATA_CRC (1 << 6) /* Date CRC error */
+#define OMAP_MMC_CMD_TIMEOUT (1 << 7) /* Command response time-out */
+#define OMAP_MMC_CMD_CRC (1 << 8) /* Command CRC error */
+#define OMAP_MMC_A_FULL (1 << 10) /* Buffer almost full */
+#define OMAP_MMC_A_EMPTY (1 << 11) /* Buffer almost empty */
+#define OMAP_MMC_OCR_BUSY (1 << 12) /* OCR busy */
+#define OMAP_MMC_CARD_IRQ (1 << 13) /* Card IRQ received */
+#define OMAP_MMC_CARD_ERR (1 << 14) /* Card status error in response */
+
+/* 2.9.2 MPUI Interface Registers FFFE:C900 */
+
+#define MPUI_CTRL_REG (volatile __u32 *)(0xfffec900)
+#define MPUI_DEBUG_ADDR (volatile __u32 *)(0xfffec904)
+#define MPUI_DEBUG_DATA (volatile __u32 *)(0xfffec908)
+#define MPUI_DEBUG_FLAG (volatile __u16 *)(0xfffec90c)
+#define MPUI_STATUS_REG (volatile __u16 *)(0xfffec910)
+#define MPUI_DSP_STATUS_REG (volatile __u16 *)(0xfffec914)
+#define MPUI_DSP_BOOT_CONFIG (volatile __u16 *)(0xfffec918)
+#define MPUI_DSP_API_CONFIG (volatile __u16 *)(0xfffec91c)
+
+/* 2.9.6 Traffic Controller Memory Interface Registers: */
+#define OMAP_IMIF_PRIO_REG 0xfffecc00
+#define OMAP_EMIFS_PRIO_REG 0xfffecc04
+#define OMAP_EMIFF_PRIO_REG 0xfffecc08
+#define OMAP_EMIFS_CONFIG_REG 0xfffecc0c
+#define OMAP_EMIFS_CS0_CONFIG 0xfffecc10
+#define OMAP_EMIFS_CS1_CONFIG 0xfffecc14
+#define OMAP_EMIFS_CS2_CONFIG 0xfffecc18
+#define OMAP_EMIFS_CS3_CONFIG 0xfffecc1c
+#define OMAP_EMIFF_SDRAM_CONFIG 0xfffecc20
+#define OMAP_EMIFF_MRS 0xfffecc24
+#define OMAP_TIMEOUT1 0xfffecc28
+#define OMAP_TIMEOUT2 0xfffecc2c
+#define OMAP_TIMEOUT3 0xfffecc30
+#define OMAP_ENDIANISM 0xfffecc34
+
+/* 2.9.10 EMIF Slow Interface Configuration Register (EMIFS_CONFIG_REG): */
+#define OMAP_EMIFS_CONFIG_FR (1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE (1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2)
+#define OMAP_EMIFS_CONFIG_BM (1 << 1)
+#define OMAP_EMIFS_CONFIG_WP (1 << 0)
+
+/*
+ * Memory chunk set aside for the Framebuffer in SRAM
+ */
+#define SRAM_FRAMEBUFFER_MEMORY OMAP1510_SRAM_BASE
+
+
+/*
+ * DMA
+ */
+
+#define OMAP1510_DMA_BASE 0xFFFED800
+#define OMAP_DMA_BASE OMAP1510_DMA_BASE
+
+/* Global Register selection */
+#define NO_GLOBAL_DMA_ACCESS 0
+
+/* Channel select field
+ * NOTE: all other channels are linear, chan0 is 0, chan1 is 1, etc...
+ */
+#define LCD_CHANNEL 0xc
+
+/* Register Select Field (LCD) */
+#define DMA_LCD_CTRL 0
+#define DMA_LCD_TOP_F1_L 1
+#define DMA_LCD_TOP_F1_U 2
+#define DMA_LCD_BOT_F1_L 3
+#define DMA_LCD_BOT_F1_U 4
+
+#define LCD_FRAME_MODE (1<<0)
+#define LCD_FRAME_IT_IE (1<<1)
+#define LCD_BUS_ERROR_IT_IE (1<<2)
+#define LCD_FRAME_1_IT_COND (1<<3)
+#define LCD_FRAME_2_IT_COND (1<<4)
+#define LCD_BUS_ERROR_IT_COND (1<<5)
+#define LCD_SOURCE_IMIF (1<<6)
+
+/*
+ * Real-Time Clock
+ */
+
+#define RTC_SECONDS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x00)
+#define RTC_MINUTES (volatile __u8 *)(OMAP1510_RTC_BASE + 0x04)
+#define RTC_HOURS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x08)
+#define RTC_DAYS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x0C)
+#define RTC_MONTHS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x10)
+#define RTC_YEARS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x14)
+#define RTC_CTRL (volatile __u8 *)(OMAP1510_RTC_BASE + 0x40)
+
+
+/* ---------------------------------------------------------------------------
+ * OMAP1510 Interrupt Handlers
+ * ---------------------------------------------------------------------------
+ *
+ */
+#define OMAP_IH1_BASE 0xfffecb00
+#define OMAP_IH2_BASE 0xfffe0000
+#define OMAP1510_ITR 0x0
+#define OMAP1510_MASK 0x4
+
+#define INTERRUPT_HANDLER_BASE OMAP_IH1_BASE
+#define INTERRUPT_INPUT_REGISTER OMAP1510_ITR
+#define INTERRUPT_MASK_REGISTER OMAP1510_MASK
+
+
+/* ---------------------------------------------------------------------------
+ * OMAP1510 TIMERS
+ * ---------------------------------------------------------------------------
+ *
+ */
+
+#define OMAP1510_32kHz_TIMER_BASE 0xfffb9000
+
+/* 32k Timer Registers */
+#define TIMER32k_CR 0x08
+#define TIMER32k_TVR 0x00
+#define TIMER32k_TCR 0x04
+
+/* 32k Timer Control Register definition */
+#define TIMER32k_TSS (1<<0)
+#define TIMER32k_TRB (1<<1)
+#define TIMER32k_INT (1<<2)
+#define TIMER32k_ARL (1<<3)
+
+/* MPU Timer base addresses */
+#define OMAP1510_MPUTIMER_BASE 0xfffec500
+#define OMAP1510_MPUTIMER_OFF 0x00000100
+
+#define OMAP1510_TIMER1_BASE 0xfffec500
+#define OMAP1510_TIMER2_BASE 0xfffec600
+#define OMAP1510_TIMER3_BASE 0xfffec700
+
+/* MPU Timer Registers */
+#define CNTL_TIMER 0
+#define LOAD_TIM 4
+#define READ_TIM 8
+
+/* CNTL_TIMER register bits */
+#define MPUTIM_FREE (1<<6)
+#define MPUTIM_CLOCK_ENABLE (1<<5)
+#define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
+#define MPUTIM_PTV_BIT 2
+#define MPUTIM_AR (1<<1)
+#define MPUTIM_ST (1<<0)
+
+/* ---------------------------------------------------------------------------
+ * OMAP1510 GPIO (SHARED)
+ * ---------------------------------------------------------------------------
+ *
+ */
+#define GPIO_DATA_INPUT_REG (OMAP1510_GPIO_BASE + 0x0)
+#define GPIO_DATA_OUTPUT_REG (OMAP1510_GPIO_BASE + 0x4)
+#define GPIO_DIR_CONTROL_REG (OMAP1510_GPIO_BASE + 0x8)
+#define GPIO_INT_CONTROL_REG (OMAP1510_GPIO_BASE + 0xc)
+#define GPIO_INT_MASK_REG (OMAP1510_GPIO_BASE + 0x10)
+#define GPIO_INT_STATUS_REG (OMAP1510_GPIO_BASE + 0x14)
+#define GPIO_PIN_CONTROL_REG (OMAP1510_GPIO_BASE + 0x18)
+
+
+/* ---------------------------
+ * OMAP1510 MPUIO (ARM only)
+ *----------------------------
+ */
+#define OMAP1510_MPUIO_BASE 0xFFFB5000
+#define MPUIO_DATA_INPUT_REG (OMAP1510_MPUIO_BASE + 0x0)
+#define MPUIO_DATA_OUTPUT_REG (OMAP1510_MPUIO_BASE + 0x4)
+#define MPUIO_DIR_CONTROL_REG (OMAP1510_MPUIO_BASE + 0x8)
+
+/* ---------------------------------------------------------------------------
+ * OMAP1510 TIPB (only)
+ * ---------------------------------------------------------------------------
+ *
+ */
+#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL_REG (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL_REG (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * OMAP1510 Camera Interface
+ * ---------------------------------------------------------------------------
+ */
+#define CAMERA_BASE (IO_BASE + 0x6800)
+#define CAM_CTRLCLOCK_REG (CAMERA_BASE + 0x00)
+#define CAM_IT_STATUS_REG (CAMERA_BASE + 0x04)
+#define CAM_MODE_REG (CAMERA_BASE + 0x08)
+#define CAM_STATUS_REG (CAMERA_BASE + 0x0C)
+#define CAM_CAMDATA_REG (CAMERA_BASE + 0x10)
+#define CAM_GPIO_REG (CAMERA_BASE + 0x14)
+#define CAM_PEAK_CTR_REG (CAMERA_BASE + 0x18)
+
+#if 0
+#ifndef __ASSEMBLY__
+typedef struct {
+ __u32 ctrlclock;
+ __u32 it_status;
+ __u32 mode;
+ __u32 status;
+ __u32 camdata;
+ __u32 gpio;
+ __u32 peak_counter;
+} camera_regs_t;
+#endif
+#endif
+
+/* CTRLCLOCK bit shifts */
+#define FOSCMOD_BIT 0
+#define FOSCMOD_MASK (0x7 << FOSCMOD_BIT)
+#define FOSCMOD_12MHz 0x0
+#define FOSCMOD_6MHz 0x2
+#define FOSCMOD_9_6MHz 0x4
+#define FOSCMOD_24MHz 0x5
+#define FOSCMOD_8MHz 0x6
+#define POLCLK (1<<3)
+#define CAMEXCLK_EN (1<<4)
+#define MCLK_EN (1<<5)
+#define DPLL_EN (1<<6)
+#define LCLK_EN (1<<7)
+
+/* IT_STATUS bit shifts */
+#define V_UP (1<<0)
+#define V_DOWN (1<<1)
+#define H_UP (1<<2)
+#define H_DOWN (1<<3)
+#define FIFO_FULL (1<<4)
+#define DATA_XFER (1<<5)
+
+/* MODE bit shifts */
+#define CAMOSC (1<<0)
+#define IMGSIZE_BIT 1
+#define IMGSIZE_MASK (0x3 << IMGSIZE_BIT)
+#define IMGSIZE_CIF (0x0 << IMGSIZE_BIT) /* 352x288 */
+#define IMGSIZE_QCIF (0x1 << IMGSIZE_BIT) /* 176x144 */
+#define IMGSIZE_VGA (0x2 << IMGSIZE_BIT) /* 640x480 */
+#define IMGSIZE_QVGA (0x3 << IMGSIZE_BIT) /* 320x240 */
+#define ORDERCAMD (1<<3)
+#define EN_V_UP (1<<4)
+#define EN_V_DOWN (1<<5)
+#define EN_H_UP (1<<6)
+#define EN_H_DOWN (1<<7)
+#define EN_DMA (1<<8)
+#define THRESHOLD (1<<9)
+#define THRESHOLD_BIT 9
+#define THRESHOLD_MASK (0x7f<<9)
+#define EN_NIRQ (1<<16)
+#define EN_FIFO_FULL (1<<17)
+#define RAZ_FIFO (1<<18)
+
+/* STATUS bit shifts */
+#define VSTATUS (1<<0)
+#define HSTATUS (1<<1)
+
+/* GPIO bit shifts */
+#define CAM_RST (1<<0)
+
+
+/*********************
+ * Watchdog timer.
+ *********************/
+#define WDTIM_BASE 0xfffec800
+#define WDTIM_CONTROL (WDTIM_BASE+0x00)
+#define WDTIM_LOAD (WDTIM_BASE+0x04)
+#define WDTIM_READ (WDTIM_BASE+0x04)
+#define WDTIM_MODE (WDTIM_BASE+0x08)
+
+/* Values to write to mode register to disable the watchdog function. */
+#define DISABLE_SEQ1 0xF5
+#define DISABLE_SEQ2 0xA0
+
+/* WDTIM_CONTROL bit definitions. */
+#define WDTIM_CONTROL_ST BIT7
+
+
+
+/* ---------------------------------------------------------------------------
+ * Differentiating processor versions for those who care.
+ * ---------------------------------------------------------------------------
+ *
+ */
+#define OMAP1509 0
+#define OMAP1510 1
+
+#define OMAP1510_ID_CODE_REG 0xfffed404
+
+#ifndef __ASSEMBLY__
+int cpu_type(void);
+#endif
+
+/*
+ * EVM Implementation Specifics.
+ *
+ * *** NOTE ***
+ * Any definitions in these files should be prefixed by an identifier -
+ * eg. OMAP1510P1_FLASH0_BASE .
+ *
+ */
+#ifdef CONFIG_OMAP_INNOVATOR
+#include "innovator.h"
+#endif
+
+#ifdef CONFIG_OMAP_1510P1
+#include "omap1510p1.h"
+#endif
+
+/*****************************************************************************/
+
+#define CLKGEN_RESET_BASE (0xfffece00)
+#define ARM_CKCTL (volatile __u16 *)(CLKGEN_RESET_BASE + 0x0)
+#define ARM_IDLECT1 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x4)
+#define ARM_IDLECT2 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x8)
+#define ARM_EWUPCT (volatile __u16 *)(CLKGEN_RESET_BASE + 0xC)
+#define ARM_RSTCT1 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x10)
+#define ARM_RSTCT2 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x14)
+#define ARM_SYSST (volatile __u16 *)(CLKGEN_RESET_BASE + 0x18)
+
+
+#define CK_CLKIN 12 /* MHz */
+#define CK_RATEF 1
+#define CK_IDLEF 2
+#define CK_ENABLEF 4
+#define CK_SELECTF 8
+#ifndef __ASSEMBLER__
+#define CK_DPLL1 ((volatile __u16 *)0xfffecf00)
+#else
+#define CK_DPLL1 (0xfffecf00)
+#endif
+#define SETARM_IDLE_SHIFT
+
+/* ARM_CKCTL bit shifts */
+#define PERDIV 0
+#define LCDDIV 2
+#define ARMDIV 4
+#define DSPDIV 6
+#define TCDIV 8
+#define DSPMMUDIV 10
+#define ARM_TIMXO 12
+#define EN_DSPCK 13
+#define ARM_INTHCK_SEL 14 /* REVISIT -- where is this used? */
+
+#define ARM_CKCTL_RSRVD_BIT15 (1 << 15)
+#define ARM_CKCTL_ARM_INTHCK_SEL (1 << 14)
+#define ARM_CKCTL_EN_DSPCK (1 << 13)
+#define ARM_CKCTL_ARM_TIMXO (1 << 12)
+#define ARM_CKCTL_DSPMMU_DIV1 (1 << 11)
+#define ARM_CKCTL_DSPMMU_DIV2 (1 << 10)
+#define ARM_CKCTL_TCDIV1 (1 << 9)
+#define ARM_CKCTL_TCDIV2 (1 << 8)
+#define ARM_CKCTL_DSPDIV1 (1 << 7)
+#define ARM_CKCTL_DSPDIV0 (1 << 6)
+#define ARM_CKCTL_ARMDIV1 (1 << 5)
+#define ARM_CKCTL_ARMDIV0 (1 << 4)
+#define ARM_CKCTL_LCDDIV1 (1 << 3)
+#define ARM_CKCTL_LCDDIV0 (1 << 2)
+#define ARM_CKCTL_PERDIV1 (1 << 1)
+#define ARM_CKCTL_PERDIV0 (1 << 0)
+
+/* ARM_IDLECT1 bit shifts */
+#define IDLWDT_ARM 0
+#define IDLXORP_ARM 1
+#define IDLPER_ARM 2
+#define IDLLCD_ARM 3
+#define IDLLB_ARM 4
+#define IDLHSAB_ARM 5
+#define IDLIF_ARM 6
+#define IDLDPLL_ARM 7
+#define IDLAPI_ARM 8
+#define IDLTIM_ARM 9
+#define SETARM_IDLE 11
+
+/* ARM_IDLECT2 bit shifts */
+#define EN_WDTCK 0
+#define EN_XORPCK 1
+#define EN_PERCK 2
+#define EN_LCDCK 3
+#define EN_LBCK 4
+#define EN_HSABCK 5
+#define EN_APICK 6
+#define EN_TIMCK 7
+#define DMACK_REQ 8
+#define EN_GPIOCK 9
+#define EN_LBFREECK 10
+
+#define ARM_RSTCT1_SW_RST (1 << 3)
+#define ARM_RSTCT1_DSP_RST (1 << 2)
+#define ARM_RSTCT1_DSP_EN (1 << 1)
+#define ARM_RSTCT1_ARM_RST (1 << 0)
+
+/* ARM_RSTCT2 bit shifts */
+#define EN_PER 0
+
+#define ARM_SYSST_RSRVD_BIT15 (1 << 15)
+#define ARM_SYSST_RSRVD_BIT14 (1 << 14)
+#define ARM_SYSST_CLOCK_SELECT2 (1 << 13)
+#define ARM_SYSST_CLOCK_SELECT1 (1 << 12)
+#define ARM_SYSST_CLOCK_SELECT0 (1 << 11)
+#define ARM_SYSST_RSRVD_BIT10 (1 << 10)
+#define ARM_SYSST_RSRVD_BIT9 (1 << 9)
+#define ARM_SYSST_RSRVD_BIT8 (1 << 8)
+#define ARM_SYSST_RSRVD_BIT7 (1 << 7)
+#define ARM_SYSST_IDLE_DSP (1 << 6)
+#define ARM_SYSST_POR (1 << 5)
+#define ARM_SYSST_EXT_RST (1 << 4)
+#define ARM_SYSST_ARM_MCRST (1 << 3)
+#define ARM_SYSST_ARM_WDRST (1 << 2)
+#define ARM_SYSST_GLOB_SWRST (1 << 1)
+#define ARM_SYSST_DSP_WDRST (1 << 0)
+
+/* Table 15-23. DPLL Control Registers: */
+#define DPLL_CTL_REG (volatile __u16 *)(0xfffecf00)
+
+/* Table 15-24. Control Register (CTL_REG): */
+
+#define DPLL_CTL_REG_IOB (1 << 13)
+#define DPLL_CTL_REG_PLL_MULT Fld(5,0)
+
+/*****************************************************************************/
+
+/* OMAP INTERRUPT REGISTERS */
+#define IRQ_ITR 0x00
+#define IRQ_MIR 0x04
+#define IRQ_SIR_IRQ 0x10
+#define IRQ_SIR_FIQ 0x14
+#define IRQ_CONTROL_REG 0x18
+#define IRQ_ISR 0x9c
+#define IRQ_ILR0 0x1c
+
+#define REG_IHL1_MIR (OMAP_IH1_BASE+IRQ_MIR)
+#define REG_IHL2_MIR (OMAP_IH2_BASE+IRQ_MIR)
+
+/* INTERRUPT LEVEL REGISTER BITS */
+#define ILR_PRIORITY_MASK (0x3c)
+#define ILR_PRIORITY_SHIFT (2)
+#define ILR_LEVEL_TRIGGER (1<<1)
+#define ILR_FIQ (1<<0)
+
+#define IRQ_LEVEL_INT 1
+#define IRQ_EDGE_INT 0
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
new file mode 100644
index 0000000..66a8b6b
--- /dev/null
+++ b/include/configs/omap1510inn.h
@@ -0,0 +1,170 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments.
+ * Kshitij Gupta <kshitij@ti.com>
+ * Configuation settings for the TI OMAP Innovator board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */
+#define CONFIG_INNOVATOROMAP1510 1 /* a Innovator Board */
+
+/* input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+/*
+ * Hardware drivers
+ */
+/*
+#define CONFIG_DRIVER_SMC9196
+#define CONFIG_SMC9196_BASE 0x08000300
+#define CONFIG_SMC9196_EXT_PHY
+*/
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE 0x08000300
+#define CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE (-4)
+#define CFG_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */
+#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1510 Innovator */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+#include <configs/omap1510.h>
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=157.87.82.48:/home/a0875451/mwd/myfs/target ip=dhcp"
+/*#define CONFIG_ETHADDR 00:0B:36:00:05:25 */
+#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */
+#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */
+#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */
+#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x10000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x10000000 /* default load address */
+
+/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+ * This time is further subdivided by a local divisor.
+ */
+#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */
+#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
+#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
+#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) /* addr of environment */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CFG_ENV_OFFSET 0x20000 /* environment starts here */
+
+#endif /* __CONFIG_H */
diff --git a/include/ns16550.h b/include/ns16550.h
index b2e791a..dff4165 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -60,6 +60,13 @@
int pad7:24;
unsigned char scr; /* 7 */
int pad8:24;
+#ifdef CONFIG_OMAP1510
+ unsigned char mdr1; /* mode select reset TL16C750*/
+ int pad9:24;
+ unsigned long pad[10];
+ unsigned char osc_12m_sel;
+ int pad10:24;
+#endif
} __attribute__ ((packed));
#else
#error "Please define NS16550 registers size."
@@ -102,6 +109,10 @@
#define LSR_TEMT 0x40 /* Xmitter empty */
#define LSR_ERR 0x80 /* Error */
+#ifdef CONFIG_OMAP1510
+#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */
+#endif
+
/* useful defaults for LCR */
#define LCR_8N1 0x03