riscv: Remove OF_PRIOR_STAGE from RISC-V boards
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
introduced, in order to support a DTB handed over by an earlier stage boo
loader. However we have another option in the Kconfig (OF_BOARD) which has
identical semantics.
On RISC-V some of the boards pick up the DTB from a1 and copy it in their
private gd_t. Apart from that they copy it to prior_stage_fdt_address, if
the Kconfig option is selected, which is unnecessary.
So let's switch the config option for those boards to OF_BOARD and define
the required board_fdt_blob_setup() for them.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
index 8e49b6d..8d90c5e 100644
--- a/arch/riscv/cpu/cpu.c
+++ b/arch/riscv/cpu/cpu.c
@@ -17,9 +17,6 @@
* The variables here must be stored in the data section since they are used
* before the bss section is available.
*/
-#ifdef CONFIG_OF_PRIOR_STAGE
-phys_addr_t prior_stage_fdt_address __section(".data");
-#endif
#ifndef CONFIG_XIP
u32 hart_lottery __section(".data") = 0;
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index 308b0a9..76850ec 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -142,11 +142,6 @@
bnez tp, secondary_hart_loop
#endif
-#ifdef CONFIG_OF_PRIOR_STAGE
- la t0, prior_stage_fdt_address
- SREG s1, 0(t0)
-#endif
-
jal board_init_f_init_reserve
SREG s1, GD_FIRMWARE_FDT_ADDR(gp)
diff --git a/arch/riscv/dts/binman.dtsi b/arch/riscv/dts/binman.dtsi
index d26cfdb..5757ef6 100644
--- a/arch/riscv/dts/binman.dtsi
+++ b/arch/riscv/dts/binman.dtsi
@@ -48,7 +48,7 @@
};
};
-#ifndef CONFIG_OF_PRIOR_STAGE
+#ifndef CONFIG_OF_BOARD
@fdt-SEQ {
description = "NAME";
type = "flat_dt";
@@ -60,7 +60,7 @@
configurations {
default = "conf-1";
-#ifndef CONFIG_OF_PRIOR_STAGE
+#ifndef CONFIG_OF_BOARD
@conf-SEQ {
#else
conf-1 {
@@ -68,7 +68,7 @@
description = "NAME";
firmware = "opensbi";
loadables = "uboot";
-#ifndef CONFIG_OF_PRIOR_STAGE
+#ifndef CONFIG_OF_BOARD
fdt = "fdt-SEQ";
#endif
};
diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c b/board/AndesTech/ax25-ae350/ax25-ae350.c
index 15da58a..b28894e 100644
--- a/board/AndesTech/ax25-ae350/ax25-ae350.c
+++ b/board/AndesTech/ax25-ae350/ax25-ae350.c
@@ -21,7 +21,6 @@
DECLARE_GLOBAL_DATA_PTR;
-extern phys_addr_t prior_stage_fdt_address;
/*
* Miscellaneous platform dependent initializations
*/
@@ -57,7 +56,13 @@
void *board_fdt_blob_setup(void)
{
+#if CONFIG_IS_ENABLED(OF_BOARD)
+ return (void *)(ulong)gd->arch.firmware_fdt_addr;
+#elif CONFIG_IS_ENABLED(OF_SEPARATE)
return (void *)CONFIG_SYS_FDT_BASE;
+#else
+ return NULL;
+#endif
}
int smc_init(void)
diff --git a/board/emulation/qemu-riscv/qemu-riscv.c b/board/emulation/qemu-riscv/qemu-riscv.c
index dcfd3f2..2a26e26 100644
--- a/board/emulation/qemu-riscv/qemu-riscv.c
+++ b/board/emulation/qemu-riscv/qemu-riscv.c
@@ -14,6 +14,8 @@
#include <virtio_types.h>
#include <virtio.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int board_init(void)
{
/*
@@ -69,3 +71,9 @@
return 0;
}
#endif
+
+void *board_fdt_blob_setup(void)
+{
+ /* Stored the DTB address there during our init */
+ return (void *)(ulong)gd->arch.firmware_fdt_addr;
+}
diff --git a/configs/ae350_rv32_defconfig b/configs/ae350_rv32_defconfig
index dab35f9..2ee5bf1 100644
--- a/configs/ae350_rv32_defconfig
+++ b/configs/ae350_rv32_defconfig
@@ -17,7 +17,7 @@
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_CACHE=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/configs/ae350_rv32_spl_defconfig b/configs/ae350_rv32_spl_defconfig
index 11063e9..7093569 100644
--- a/configs/ae350_rv32_spl_defconfig
+++ b/configs/ae350_rv32_spl_defconfig
@@ -21,7 +21,7 @@
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_CACHE=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTP_SEND_HOSTNAME=y
diff --git a/configs/ae350_rv64_defconfig b/configs/ae350_rv64_defconfig
index d2d0e31..4b98531 100644
--- a/configs/ae350_rv64_defconfig
+++ b/configs/ae350_rv64_defconfig
@@ -18,7 +18,7 @@
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_CACHE=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/configs/ae350_rv64_spl_defconfig b/configs/ae350_rv64_spl_defconfig
index 90511ae..3c072aa 100644
--- a/configs/ae350_rv64_spl_defconfig
+++ b/configs/ae350_rv64_spl_defconfig
@@ -22,7 +22,7 @@
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_CACHE=y
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTP_SEND_HOSTNAME=y
diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig
index f49d49e..e77e3ed 100644
--- a/configs/qemu-riscv32_defconfig
+++ b/configs/qemu-riscv32_defconfig
@@ -11,6 +11,6 @@
CONFIG_CMD_BOOTEFI_SELFTEST=y
CONFIG_CMD_NVEDIT_EFI=y
# CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_MTD=y
diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig
index a009f62..0378741 100644
--- a/configs/qemu-riscv32_smode_defconfig
+++ b/configs/qemu-riscv32_smode_defconfig
@@ -12,7 +12,7 @@
CONFIG_CMD_BOOTEFI_SELFTEST=y
CONFIG_CMD_NVEDIT_EFI=y
# CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_MTD=y
CONFIG_SYSRESET_SBI=y
diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig
index aac6f389..b0e655b 100644
--- a/configs/qemu-riscv32_spl_defconfig
+++ b/configs/qemu-riscv32_spl_defconfig
@@ -14,7 +14,7 @@
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_CMD_SBI=y
# CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_MTD=y
CONFIG_SYSRESET_SBI=y
diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig
index 506ac43..1f8dc2d 100644
--- a/configs/qemu-riscv64_defconfig
+++ b/configs/qemu-riscv64_defconfig
@@ -12,6 +12,6 @@
CONFIG_CMD_BOOTEFI_SELFTEST=y
CONFIG_CMD_NVEDIT_EFI=y
# CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_MTD=y
diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig
index db2f21d..bdcec1f 100644
--- a/configs/qemu-riscv64_smode_defconfig
+++ b/configs/qemu-riscv64_smode_defconfig
@@ -15,7 +15,7 @@
CONFIG_CMD_BOOTEFI_SELFTEST=y
CONFIG_CMD_NVEDIT_EFI=y
# CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_MTD=y
CONFIG_SYSRESET_SBI=y
diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig
index cf33870..9745c1a 100644
--- a/configs/qemu-riscv64_spl_defconfig
+++ b/configs/qemu-riscv64_spl_defconfig
@@ -15,7 +15,7 @@
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_CMD_SBI=y
# CONFIG_CMD_MII is not set
-CONFIG_OF_PRIOR_STAGE=y
+CONFIG_OF_BOARD=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_MTD=y
CONFIG_SYSRESET_SBI=y
diff --git a/dts/Kconfig b/dts/Kconfig
index 0cc562c..7a297b2 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -118,7 +118,7 @@
Boards in the mainline U-Boot tree should not use it.
config OF_BOARD
- bool "Provided by the board at runtime"
+ bool "Provided by the board (e.g a previous loader) at runtime"
depends on !SANDBOX
help
If this option is enabled, the device tree will be provided by