NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.
This patch covers the non-PPC boards that were missed in the previous
patch (commit 170c1972).
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index c5134a2..8a1c4f5 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -106,6 +106,8 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* NOR flash - no real flash on this board */
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index fa5a7a9..575f60e 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -256,6 +256,8 @@
#define CONFIG_ENV_IS_IN_ONENAND 1
#define CONFIG_ENV_ADDR 0x00020000
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#ifdef CONFIG_SYS_USE_UBI
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT "onenand0=onenand"
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index 219eea3..df73661 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -130,6 +130,8 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 1828c63..7eef9a3 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -122,6 +122,8 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* NOR flash - no real flash on this board */
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 6d24023..028a04f 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -132,6 +132,8 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* NOR flash - no real flash on this board */
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 00f3114..9539d18 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -266,6 +266,8 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 572c45b..af97afe 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -118,6 +118,7 @@
/* NOR flash, if populated */
#ifndef CONFIG_CMD_NAND
#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#else
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
@@ -140,6 +141,8 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index c466823..bc2a32b 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -118,6 +118,8 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet - not present */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 9cb9838..7909569 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -93,6 +93,7 @@
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*=====================*/
/* Board related stuff */
/*=====================*/
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index a47620f..531baf1 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -88,6 +88,7 @@
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/* I2C switch definitions for PCA9543 chip */
#define CONFIG_SYS_I2C_PCA9543_ADDR 0x70
#define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */
diff --git a/include/configs/delta.h b/include/configs/delta.h
index e7186e8..1572eef 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -228,6 +228,8 @@
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* nand timeout values */
#define CONFIG_SYS_NAND_PROG_ERASE_TO 3000
#define CONFIG_SYS_NAND_OTHER_TO 100
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 28c4de0..8253172 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -119,6 +119,8 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index 5062cdb..f0b4207 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -110,6 +110,8 @@
#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23)
#define NAND_ALLOW_ERASE_ALL 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#define CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 1
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index c2bd7e6..a1a849e 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -142,6 +142,7 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index e205c01..198c3d1 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -138,6 +138,7 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 8902312..3bf798a 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -128,6 +128,8 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index dbd4dcc..d7e0ea1 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -132,6 +132,8 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 9e000ed..4034ea4 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -138,6 +138,9 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index c2ad5bf..701a296 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -158,6 +158,8 @@
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* Environment information */
#define CONFIG_BOOTDELAY 10
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 1255f21..2612165 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -265,7 +265,8 @@
* NAND-FLASH stuff
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */
+#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/*
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 4784c40..315d7f8 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -236,6 +236,8 @@
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* NOR flash */
#define CONFIG_SYS_FLASH_CFI 1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 94e1eb9..f8197b1 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -258,6 +258,8 @@
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
#define CONFIG_CMD_JFFS2 1
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index 018f576..ddc8e71 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -269,6 +269,8 @@
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63}
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* Boot configuration (define only one of next 3) */
#define CONFIG_BOOT_NAND
/* None of these are currently implemented. Left from the original Samsung
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 15c3708..6b4586e 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -206,6 +206,8 @@
#define CONFIG_SYS_NAND_SENDCMD_RETRY 3
#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/* NAND Timing Parameters (in ns) */
#define NAND_TIMING_tCH 10
#define NAND_TIMING_tCS 0