blob: b9f7dc39c9660ed5f4fd6c9dce77eedea6de4a57 [file] [log] [blame]
.. SPDX-License-Identifier: GPL-2.0+
Verdin iMX8M Mini Module
========================
Quick Start
-----------
- Build the ARM trusted firmware binary
- Get the DDR firmware
- Build U-Boot
- Flash to eMMC
- Boot
Get and Build the ARM Trusted Firmware (Trusted Firmware A)
-----------------------------------------------------------
.. code-block:: bash
$ echo "Downloading and building TF-A..."
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
$ cd trusted-firmware-a
Then build ATF (TF-A):
.. code-block:: bash
$ make PLAT=imx8mm IMX_BOOT_UART_BASE=0x30860000 bl31
$ cp build/imx8mm/release/bl31.bin ../
Get the DDR Firmware
--------------------
.. code-block:: bash
$ cd ..
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
$ chmod +x firmware-imx-8.4.1.bin
$ ./firmware-imx-8.4.1.bin
$ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ export ATF_LOAD_ADDR=0x920000
$ make verdin-imx8mm_defconfig
$ make flash.bin
Flash to eMMC
-------------
.. code-block:: bash
> tftpboot ${loadaddr} flash.bin
> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
As a convenience, instead of the last two commands one may also use the update
U-Boot wrapper:
.. code-block:: bash
> run update_uboot
Boot
----
ATF, U-Boot proper and u-boot.dtb images are packed into FIT image,
which is loaded and parsed by SPL.
Boot sequence is:
* SPL ---> ATF (TF-A) ---> U-Boot proper
Output:
.. code-block:: bash
U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
Normal Boot
Trying to boot from MMC1
U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
Reset cause: POR
DRAM: 2 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
Net: eth0: ethernet@30be0000
Hit any key to stop autoboot: 0
Verdin iMX8MM #