tegra: Convert tegra GPIO driver to use driver model

This is an implementation of GPIOs for Tegra that uses driver model. It has
been tested on trimslice and also using the new iotrace feature.

The implementation uses a top-level GPIO device (which has no actual GPIOS).
Under this all the banks are created as separate GPIO devices.

The GPIOs are named as per the Tegra datasheet/header files: A0..A7, B0..B7,
..., Z0..Z7, AA0..AA7, etc.

Since driver model is not yet available before relocation, or in SPL, a
special function is provided for seaboard's SPL code.

Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c
index fea9d17..1cc4abb 100644
--- a/drivers/gpio/tegra_gpio.c
+++ b/drivers/gpio/tegra_gpio.c
@@ -12,10 +12,17 @@
  */
 
 #include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <errno.h>
+#include <fdtdec.h>
 #include <asm/io.h>
 #include <asm/bitops.h>
 #include <asm/arch/tegra.h>
 #include <asm/gpio.h>
+#include <dm/device-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 enum {
 	TEGRA_CMD_INFO,
@@ -24,14 +31,18 @@
 	TEGRA_CMD_INPUT,
 };
 
-static struct gpio_names {
-	char name[GPIO_NAME_SIZE];
-} gpio_names[MAX_NUM_GPIOS];
+struct tegra_gpio_platdata {
+	struct gpio_ctlr_bank *bank;
+	const char *port_name;	/* Name of port, e.g. "B" */
+	int base_gpio;		/* Port number for this port (0, 1,.., n-1) */
+};
 
-static char *get_name(int i)
-{
-	return *gpio_names[i].name ? gpio_names[i].name : "UNKNOWN";
-}
+/* Information about each port at run-time */
+struct tegra_port_info {
+	char label[TEGRA_GPIOS_PER_PORT][GPIO_NAME_SIZE];
+	struct gpio_ctlr_bank *bank;
+	int base_gpio;		/* Port number for this port (0, 1,.., n-1) */
+};
 
 /* Return config of pin 'gpio' as GPIO (1) or SFPIO (0) */
 static int get_config(unsigned gpio)
@@ -121,38 +132,72 @@
 	writel(u, &bank->gpio_out[GPIO_PORT(gpio)]);
 }
 
+static int check_reserved(struct udevice *dev, unsigned offset,
+			  const char *func)
+{
+	struct tegra_port_info *state = dev_get_priv(dev);
+	struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+
+	if (!*state->label[offset]) {
+		printf("tegra_gpio: %s: error: gpio %s%d not reserved\n",
+		       func, uc_priv->bank_name, offset);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/* set GPIO pin 'gpio' as an output, with polarity 'value' */
+int tegra_spl_gpio_direction_output(int gpio, int value)
+{
+	/* Configure as a GPIO */
+	set_config(gpio, 1);
+
+	/* Configure GPIO output value. */
+	set_level(gpio, value);
+
+	/* Configure GPIO direction as output. */
+	set_direction(gpio, 1);
+
+	return 0;
+}
+
 /*
  * Generic_GPIO primitives.
  */
 
-int gpio_request(unsigned gpio, const char *label)
+static int tegra_gpio_request(struct udevice *dev, unsigned offset,
+			      const char *label)
 {
-	if (gpio >= MAX_NUM_GPIOS)
-		return -1;
+	struct tegra_port_info *state = dev_get_priv(dev);
 
-	if (label != NULL) {
-		strncpy(gpio_names[gpio].name, label, GPIO_NAME_SIZE);
-		gpio_names[gpio].name[GPIO_NAME_SIZE - 1] = '\0';
-	}
+	if (*state->label[offset])
+		return -EBUSY;
+
+	strncpy(state->label[offset], label, GPIO_NAME_SIZE);
+	state->label[offset][GPIO_NAME_SIZE - 1] = '\0';
 
 	/* Configure as a GPIO */
-	set_config(gpio, 1);
+	set_config(state->base_gpio + offset, 1);
 
 	return 0;
 }
 
-int gpio_free(unsigned gpio)
+static int tegra_gpio_free(struct udevice *dev, unsigned offset)
 {
-	if (gpio >= MAX_NUM_GPIOS)
-		return -1;
+	struct tegra_port_info *state = dev_get_priv(dev);
+	int ret;
 
-	gpio_names[gpio].name[0] = '\0';
-	/* Do not configure as input or change pin mux here */
+	ret = check_reserved(dev, offset, __func__);
+	if (ret)
+		return ret;
+	state->label[offset][0] = '\0';
+
 	return 0;
 }
 
 /* read GPIO OUT value of pin 'gpio' */
-static int gpio_get_output_value(unsigned gpio)
+static int tegra_gpio_get_output_value(unsigned gpio)
 {
 	struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
 	struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)];
@@ -166,24 +211,34 @@
 	return (val >> GPIO_BIT(gpio)) & 1;
 }
 
+
 /* set GPIO pin 'gpio' as an input */
-int gpio_direction_input(unsigned gpio)
+static int tegra_gpio_direction_input(struct udevice *dev, unsigned offset)
 {
-	debug("gpio_direction_input: pin = %d (port %d:bit %d)\n",
-		gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio));
+	struct tegra_port_info *state = dev_get_priv(dev);
+	int ret;
+
+	ret = check_reserved(dev, offset, __func__);
+	if (ret)
+		return ret;
 
 	/* Configure GPIO direction as input. */
-	set_direction(gpio, 0);
+	set_direction(state->base_gpio + offset, 0);
 
 	return 0;
 }
 
 /* set GPIO pin 'gpio' as an output, with polarity 'value' */
-int gpio_direction_output(unsigned gpio, int value)
+static int tegra_gpio_direction_output(struct udevice *dev, unsigned offset,
+				       int value)
 {
-	debug("gpio_direction_output: pin = %d (port %d:bit %d) = %s\n",
-		gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio),
-		value ? "HIGH" : "LOW");
+	struct tegra_port_info *state = dev_get_priv(dev);
+	int gpio = state->base_gpio + offset;
+	int ret;
+
+	ret = check_reserved(dev, offset, __func__);
+	if (ret)
+		return ret;
 
 	/* Configure GPIO output value. */
 	set_level(gpio, value);
@@ -195,25 +250,38 @@
 }
 
 /* read GPIO IN value of pin 'gpio' */
-int gpio_get_value(unsigned gpio)
+static int tegra_gpio_get_value(struct udevice *dev, unsigned offset)
 {
-	struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
-	struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)];
+	struct tegra_port_info *state = dev_get_priv(dev);
+	int gpio = state->base_gpio + offset;
+	int ret;
 	int val;
 
-	debug("gpio_get_value: pin = %d (port %d:bit %d)\n",
-		gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio));
+	ret = check_reserved(dev, offset, __func__);
+	if (ret)
+		return ret;
 
-	val = readl(&bank->gpio_in[GPIO_PORT(gpio)]);
+	debug("%s: pin = %d (port %d:bit %d)\n", __func__,
+	      gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio));
+
+	val = readl(&state->bank->gpio_in[GPIO_PORT(gpio)]);
 
 	return (val >> GPIO_BIT(gpio)) & 1;
 }
 
 /* write GPIO OUT value to pin 'gpio' */
-int gpio_set_value(unsigned gpio, int value)
+static int tegra_gpio_set_value(struct udevice *dev, unsigned offset, int value)
 {
+	struct tegra_port_info *state = dev_get_priv(dev);
+	int gpio = state->base_gpio + offset;
+	int ret;
+
+	ret = check_reserved(dev, offset, __func__);
+	if (ret)
+		return ret;
+
 	debug("gpio_set_value: pin = %d (port %d:bit %d), value = %d\n",
-		gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio), value);
+	      gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio), value);
 
 	/* Configure GPIO output value. */
 	set_level(gpio, value);
@@ -241,26 +309,175 @@
 	}
 }
 
-/*
- * Display Tegra GPIO information
- */
-void gpio_info(void)
+static int tegra_gpio_get_function(struct udevice *dev, unsigned offset)
 {
-	unsigned c;
-	int type;
+	struct tegra_port_info *state = dev_get_priv(dev);
+	int gpio = state->base_gpio + offset;
 
-	for (c = 0; c < MAX_NUM_GPIOS; c++) {
-		type = get_config(c);		/* GPIO, not SFPIO */
-		if (type) {
-			printf("GPIO_%d:\t%s is an %s, ", c,
-				get_name(c),
-				get_direction(c) ? "OUTPUT" : "INPUT");
-			if (get_direction(c))
-				printf("value = %d", gpio_get_output_value(c));
-			else
-				printf("value = %d", gpio_get_value(c));
-			printf("\n");
-		} else
-			continue;
-	}
+	if (!*state->label[offset])
+		return GPIOF_UNUSED;
+	if (!get_config(gpio))
+		return GPIOF_FUNC;
+	else if (get_direction(gpio))
+		return GPIOF_OUTPUT;
+	else
+		return GPIOF_INPUT;
 }
+
+static int tegra_gpio_get_state(struct udevice *dev, unsigned int offset,
+				char *buf, int bufsize)
+{
+	struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+	struct tegra_port_info *state = dev_get_priv(dev);
+	int gpio = state->base_gpio + offset;
+	const char *label;
+	int is_output;
+	int is_gpio;
+	int size;
+
+	label = state->label[offset];
+	is_gpio = get_config(gpio); /* GPIO, not SFPIO */
+	size = snprintf(buf, bufsize, "%s%d: ",
+			uc_priv->bank_name ? uc_priv->bank_name : "", offset);
+	buf += size;
+	bufsize -= size;
+	if (is_gpio) {
+		is_output = get_direction(gpio);
+
+		snprintf(buf, bufsize, "%s: %d [%c]%s%s",
+			 is_output ? "out" : " in",
+			 is_output ?
+				tegra_gpio_get_output_value(gpio) :
+				tegra_gpio_get_value(dev, offset),
+			 *label ? 'x' : ' ',
+			 *label ? " " : "",
+			 label);
+	} else {
+		snprintf(buf, bufsize, "sfpio");
+	}
+
+	return 0;
+}
+
+static const struct dm_gpio_ops gpio_tegra_ops = {
+	.request		= tegra_gpio_request,
+	.free			= tegra_gpio_free,
+	.direction_input	= tegra_gpio_direction_input,
+	.direction_output	= tegra_gpio_direction_output,
+	.get_value		= tegra_gpio_get_value,
+	.set_value		= tegra_gpio_set_value,
+	.get_function		= tegra_gpio_get_function,
+	.get_state		= tegra_gpio_get_state,
+};
+
+/**
+ * Returns the name of a GPIO port
+ *
+ * GPIOs are named A, B, C, ..., Z, AA, BB, CC, ...
+ *
+ * @base_port: Base port number (0, 1..n-1)
+ * @return allocated string containing the name
+ */
+static char *gpio_port_name(int base_port)
+{
+	char *name, *s;
+
+	name = malloc(3);
+	if (name) {
+		s = name;
+		*s++ = 'A' + (base_port % 26);
+		if (base_port >= 26)
+			*s++ = *name;
+		*s = '\0';
+	}
+
+	return name;
+}
+
+static const struct udevice_id tegra_gpio_ids[] = {
+	{ .compatible = "nvidia,tegra30-gpio" },
+	{ .compatible = "nvidia,tegra20-gpio" },
+	{ }
+};
+
+static int gpio_tegra_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+	struct tegra_port_info *priv = dev->priv;
+	struct tegra_gpio_platdata *plat = dev->platdata;
+
+	/* Only child devices have ports */
+	if (!plat)
+		return 0;
+
+	priv->bank = plat->bank;
+	priv->base_gpio = plat->base_gpio;
+
+	uc_priv->gpio_count = TEGRA_GPIOS_PER_PORT;
+	uc_priv->bank_name = plat->port_name;
+
+	return 0;
+}
+
+/**
+ * We have a top-level GPIO device with no actual GPIOs. It has a child
+ * device for each Tegra port.
+ */
+static int gpio_tegra_bind(struct udevice *parent)
+{
+	struct tegra_gpio_platdata *plat = parent->platdata;
+	struct gpio_ctlr *ctlr;
+	int bank_count;
+	int bank;
+	int ret;
+	int len;
+
+	/* If this is a child device, there is nothing to do here */
+	if (plat)
+		return 0;
+
+	/*
+	 * This driver does not make use of interrupts, other than to figure
+	 * out the number of GPIO banks
+	 */
+	if (!fdt_getprop(gd->fdt_blob, parent->of_offset, "interrupts", &len))
+		return -EINVAL;
+	bank_count = len / 3 / sizeof(u32);
+	ctlr = (struct gpio_ctlr *)fdtdec_get_addr(gd->fdt_blob,
+						   parent->of_offset, "reg");
+	for (bank = 0; bank < bank_count; bank++) {
+		int port;
+
+		for (port = 0; port < TEGRA_PORTS_PER_BANK; port++) {
+			struct tegra_gpio_platdata *plat;
+			struct udevice *dev;
+			int base_port;
+
+			plat = calloc(1, sizeof(*plat));
+			if (!plat)
+				return -ENOMEM;
+			plat->bank = &ctlr->gpio_bank[bank];
+			base_port = bank * TEGRA_PORTS_PER_BANK + port;
+			plat->base_gpio = TEGRA_GPIOS_PER_PORT * base_port;
+			plat->port_name = gpio_port_name(base_port);
+
+			ret = device_bind(parent, parent->driver,
+					  plat->port_name, plat, -1, &dev);
+			if (ret)
+				return ret;
+			dev->of_offset = parent->of_offset;
+		}
+	}
+
+	return 0;
+}
+
+U_BOOT_DRIVER(gpio_tegra) = {
+	.name	= "gpio_tegra",
+	.id	= UCLASS_GPIO,
+	.of_match = tegra_gpio_ids,
+	.bind	= gpio_tegra_bind,
+	.probe = gpio_tegra_probe,
+	.priv_auto_alloc_size = sizeof(struct tegra_port_info),
+	.ops	= &gpio_tegra_ops,
+};