armv8: ls2080ardb: Add LS2081ARDB board support
LS2081ARDB board is similar to LS2080ARDB board with few differences
It hosts LS2081A SoC
Default boot source is QSPI-boot
It does not have IFC interface
RTC and QSPI flash device are different
It provides QIXIS access via I2C
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig
index 2f0465f..8f64642 100644
--- a/board/freescale/ls2080ardb/Kconfig
+++ b/board/freescale/ls2080ardb/Kconfig
@@ -16,3 +16,21 @@
source "board/freescale/common/Kconfig"
endif
+
+if TARGET_LS2081ARDB
+
+config SYS_BOARD
+ default "ls2080ardb"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "ls2080ardb"
+
+source "board/freescale/common/Kconfig"
+
+endif
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
index 3175ba3..91f13ea 100644
--- a/board/freescale/ls2080ardb/MAINTAINERS
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -12,6 +12,11 @@
S: Maintained
F: configs/ls2088ardb_qspi_defconfig
+LS2081ARDB BOARD
+M: Priyanka Jain <priyanka.jain@nxp.com>
+S: Maintained
+F: configs/ls2081ardb_defconfig
+
LS2080A_SECURE_BOOT BOARD
M: Saksham Jain <saksham.jain@nxp.freescale.com>
S: Maintained
diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README
index 873aadf..fde143d 100644
--- a/board/freescale/ls2080ardb/README
+++ b/board/freescale/ls2080ardb/README
@@ -4,10 +4,14 @@
evaluation, and development platform that supports the QorIQ LS2080A, LS2088A
Layerscape Architecture processor.
-LS2080A, LS2088A SoC Overview
---------------------
+The LS2081A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS2081A
+Layerscape Architecture processor.More details in below sections
+
+LS2080A, LS2088A, LS2081A SoC Overview
+--------------------------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A,
-LS2088A SoC overview.
+LS2081A, LS2088A SoC overview.
LS2080ARDB board Overview
-----------------------
@@ -38,6 +42,16 @@
- UART
- ARM JTAG support
+ LS2081ARDB board Overview
+ -------------------------
+ LS2081ARDB board is similar to LS2080ARDB board
+ with few differences like
+ - Hosts LS2081A SoC
+ - Default boot source is QSPI-boot
+ - Does not have IFC interface
+ - RTC and QSPI flash devices are different
+ - Provides QIXIS access via I2C
+
Memory map from core's view
----------------------------
0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 10e8ea4..df2d768 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -68,6 +68,44 @@
cpu_name(buf);
printf("Board: %s-RDB, ", buf);
+#ifdef CONFIG_TARGET_LS2081ARDB
+#ifdef CONFIG_FSL_QIXIS
+ sw = QIXIS_READ(arch);
+ printf("Board Arch: V%d, ", sw >> 4);
+ printf("Board version: %c, ", (sw & 0xf) + 'A');
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_QMAP_MASK) >> QIXIS_QMAP_SHIFT;
+ switch (sw) {
+ case 0:
+ puts("boot from QSPI DEV#0\n");
+ puts("QSPI_CSA_1 mapped to QSPI DEV#1\n");
+ break;
+ case 1:
+ puts("boot from QSPI DEV#1\n");
+ puts("QSPI_CSA_1 mapped to QSPI DEV#0\n");
+ break;
+ case 2:
+ puts("boot from QSPI EMU\n");
+ puts("QSPI_CSA_1 mapped to QSPI DEV#0\n");
+ break;
+ case 3:
+ puts("boot from QSPI EMU\n");
+ puts("QSPI_CSA_1 mapped to QSPI DEV#1\n");
+ break;
+ case 4:
+ puts("boot from QSPI DEV#0\n");
+ puts("QSPI_CSA_1 mapped to QSPI EMU\n");
+ break;
+ default:
+ printf("invalid setting of SW%u\n", sw);
+ break;
+ }
+#endif
+ puts("SERDES1 Reference : ");
+ printf("Clock1 = 100MHz ");
+ printf("Clock2 = 161.13MHz");
+#else
#ifdef CONFIG_FSL_QIXIS
sw = QIXIS_READ(arch);
printf("Board Arch: V%d, ", sw >> 4);
@@ -88,6 +126,7 @@
puts("SERDES1 Reference : ");
printf("Clock1 = 156.25MHz ");
printf("Clock2 = 156.25MHz");
+#endif
puts("\nSERDES2 Reference : ");
printf("Clock1 = 100MHz ");
@@ -209,6 +248,9 @@
int board_early_init_f(void)
{
+#ifdef CONFIG_SYS_I2C_EARLY_INIT
+ i2c_early_init_f();
+#endif
fsl_lsch3_early_init_f();
return 0;
}
@@ -216,6 +258,11 @@
int misc_init_r(void)
{
#ifdef CONFIG_FSL_QIXIS
+ /*
+ * LS2081ARDB has smart voltage translator which needs
+ * to be programmed as below
+ */
+#ifndef CONFIG_TARGET_LS2081ARDB
u8 sw;
sw = QIXIS_READ(arch);
@@ -225,12 +272,15 @@
* by setting GPIO4_10 output to zero
*/
if ((sw & 0xf) == 0x5) {
+#endif
out_le32(GPIO4_GPDIR_ADDR, (1 << 21 |
in_le32(GPIO4_GPDIR_ADDR)));
out_le32(GPIO4_GPDAT_ADDR, (~(1 << 21) &
in_le32(GPIO4_GPDAT_ADDR)));
+#ifndef CONFIG_TARGET_LS2081ARDB
}
#endif
+#endif
if (hwconfig("sdhc"))
config_board_mux(MUX_TYPE_SDHC);
@@ -350,6 +400,7 @@
unsigned int slot,
unsigned int *addr)
{
+#ifndef CONFIG_TARGET_LS2081ARDB
#ifdef CONFIG_FSL_QIXIS
u8 sw;
@@ -361,4 +412,5 @@
*addr = SPD_EEPROM_ADDRESS3;
}
#endif
+#endif
}