mpc83xx: Migrate BATS config to Kconfig
The BATs (block address translation registers) determine the initial
memory window mappings. Hence, they must be known at compile time and
cannot be implemented in the DT mechanism.
Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/configs/MPC832XEMDS_HOST_66_defconfig b/configs/MPC832XEMDS_HOST_66_defconfig
index 2a4ff9a..dac8f28 100644
--- a/configs/MPC832XEMDS_HOST_66_defconfig
+++ b/configs/MPC832XEMDS_HOST_66_defconfig
@@ -10,6 +10,72 @@
CONFIG_PCI_INT_ARBITER1_ENABLE=y
CONFIG_BOOT_MEMORY_SPACE_LOW=y
CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
+CONFIG_BAT0=y
+CONFIG_BAT0_NAME="SDRAM"
+CONFIG_BAT0_BASE=0x00000000
+CONFIG_BAT0_LENGTH_256_MBYTES=y
+CONFIG_BAT0_ACCESS_RW=y
+CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
+CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
+CONFIG_BAT0_USER_MODE_VALID=y
+CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
+CONFIG_BAT1=y
+CONFIG_BAT1_NAME="IMMR"
+CONFIG_BAT1_BASE=0xE0000000
+CONFIG_BAT1_LENGTH_4_MBYTES=y
+CONFIG_BAT1_ACCESS_RW=y
+CONFIG_BAT1_ICACHE_INHIBITED=y
+CONFIG_BAT1_ICACHE_GUARDED=y
+CONFIG_BAT1_DCACHE_INHIBITED=y
+CONFIG_BAT1_DCACHE_GUARDED=y
+CONFIG_BAT1_USER_MODE_VALID=y
+CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
+CONFIG_BAT2=y
+CONFIG_BAT2_NAME="BCSR"
+CONFIG_BAT2_BASE=0xF8000000
+CONFIG_BAT2_ACCESS_RW=y
+CONFIG_BAT2_ICACHE_INHIBITED=y
+CONFIG_BAT2_ICACHE_GUARDED=y
+CONFIG_BAT2_DCACHE_INHIBITED=y
+CONFIG_BAT2_DCACHE_GUARDED=y
+CONFIG_BAT2_USER_MODE_VALID=y
+CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
+CONFIG_BAT3=y
+CONFIG_BAT3_NAME="FLASH"
+CONFIG_BAT3_BASE=0xFE000000
+CONFIG_BAT3_LENGTH_32_MBYTES=y
+CONFIG_BAT3_ACCESS_RW=y
+CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y
+CONFIG_BAT3_DCACHE_INHIBITED=y
+CONFIG_BAT3_DCACHE_GUARDED=y
+CONFIG_BAT3_USER_MODE_VALID=y
+CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
+CONFIG_BAT5=y
+CONFIG_BAT5_NAME="STACK_IN_DCACHE"
+CONFIG_BAT5_BASE=0xE6000000
+CONFIG_BAT5_ACCESS_RW=y
+CONFIG_BAT5_USER_MODE_VALID=y
+CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
+CONFIG_BAT6=y
+CONFIG_BAT6_NAME="PCI_MEM_PHYS"
+CONFIG_BAT6_BASE=0x80000000
+CONFIG_BAT6_LENGTH_256_MBYTES=y
+CONFIG_BAT6_ACCESS_RW=y
+CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
+CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
+CONFIG_BAT6_USER_MODE_VALID=y
+CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
+CONFIG_BAT7=y
+CONFIG_BAT7_NAME="PCI1_MMIO_PHYS"
+CONFIG_BAT7_BASE=0x90000000
+CONFIG_BAT7_LENGTH_256_MBYTES=y
+CONFIG_BAT7_ACCESS_RW=y
+CONFIG_BAT7_ICACHE_INHIBITED=y
+CONFIG_BAT7_ICACHE_GUARDED=y
+CONFIG_BAT7_DCACHE_INHIBITED=y
+CONFIG_BAT7_DCACHE_GUARDED=y
+CONFIG_BAT7_USER_MODE_VALID=y
+CONFIG_BAT7_SUPERVISOR_MODE_VALID=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="PCI_66M,PQ_MDS_PIB=1"