AX88180: new gigabit network driver
Signed-off-by: Louis Su <louis@asix.com.tw>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a4ea3a2..439c354 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -26,6 +26,7 @@
LIB := $(obj)libnet.a
COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
+COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
COBJS-$(CONFIG_DRIVER_CS8900) += cs8900.o
diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c
new file mode 100644
index 0000000..d843397
--- /dev/null
+++ b/drivers/net/ax88180.c
@@ -0,0 +1,727 @@
+/*
+ * ax88180: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver
+ *
+ * This program is free software; you can distribute it and/or modify
+ * it under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
+ * USA.
+ */
+
+/*
+ * ========================================================================
+ * ASIX AX88180 Non-PCI 16/32-bit Gigabit Ethernet Linux Driver
+ *
+ * The AX88180 Ethernet controller is a high performance and highly
+ * integrated local CPU bus Ethernet controller with embedded 40K bytes
+ * SRAM and supports both 16-bit and 32-bit SRAM-Like interfaces for any
+ * embedded systems.
+ * The AX88180 is a single chip 10/100/1000Mbps Gigabit Ethernet
+ * controller that supports both MII and RGMII interfaces and is
+ * compliant to IEEE 802.3, IEEE 802.3u and IEEE 802.3z standards.
+ *
+ * Please visit ASIX's web site (http://www.asix.com.tw) for more
+ * details.
+ *
+ * Module Name : ax88180.c
+ * Date : 2008-07-07
+ * History
+ * 09/06/2006 : New release for AX88180 US2 chip.
+ * 07/07/2008 : Fix up the coding style and using inline functions
+ * instead of macros
+ * ========================================================================
+ */
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+#include "ax88180.h"
+
+/*
+ * ===========================================================================
+ * Local SubProgram Declaration
+ * ===========================================================================
+ */
+static void ax88180_rx_handler (struct eth_device *dev);
+static int ax88180_phy_initial (struct eth_device *dev);
+static void ax88180_meidia_config (struct eth_device *dev);
+static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev);
+static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev);
+static unsigned short ax88180_mdio_read (struct eth_device *dev,
+ unsigned long regaddr);
+static void ax88180_mdio_write (struct eth_device *dev,
+ unsigned long regaddr, unsigned short regdata);
+
+/*
+ * ===========================================================================
+ * Local SubProgram Bodies
+ * ===========================================================================
+ */
+static int ax88180_mdio_check_complete (struct eth_device *dev)
+{
+ int us_cnt = 10000;
+ unsigned short tmpval;
+
+ /* MDIO read/write should not take more than 10 ms */
+ while (--us_cnt) {
+ tmpval = INW (dev, MDIOCTRL);
+ if (((tmpval & READ_PHY) == 0) && ((tmpval & WRITE_PHY) == 0))
+ break;
+ }
+
+ return us_cnt;
+}
+
+static unsigned short
+ax88180_mdio_read (struct eth_device *dev, unsigned long regaddr)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long tmpval = 0;
+
+ OUTW (dev, (READ_PHY | (regaddr << 8) | priv->PhyAddr), MDIOCTRL);
+
+ if (ax88180_mdio_check_complete (dev))
+ tmpval = INW (dev, MDIODP);
+ else
+ printf ("Failed to read PHY register!\n");
+
+ return (unsigned short)(tmpval & 0xFFFF);
+}
+
+static void
+ax88180_mdio_write (struct eth_device *dev, unsigned long regaddr,
+ unsigned short regdata)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+
+ OUTW (dev, regdata, MDIODP);
+
+ OUTW (dev, (WRITE_PHY | (regaddr << 8) | priv->PhyAddr), MDIOCTRL);
+
+ if (!ax88180_mdio_check_complete (dev))
+ printf ("Failed to write PHY register!\n");
+}
+
+static int ax88180_phy_reset (struct eth_device *dev)
+{
+ unsigned short delay_cnt = 500;
+
+ ax88180_mdio_write (dev, BMCR, (PHY_RESET | AUTONEG_EN));
+
+ /* Wait for the reset to complete, or time out (500 ms) */
+ while (ax88180_mdio_read (dev, BMCR) & PHY_RESET) {
+ udelay (1000);
+ if (--delay_cnt == 0) {
+ printf ("Failed to reset PHY!\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static void ax88180_mac_reset (struct eth_device *dev)
+{
+ unsigned long tmpval;
+ unsigned char i;
+
+ struct {
+ unsigned short offset, value;
+ } program_seq[] = {
+ {
+ MISC, MISC_NORMAL}, {
+ RXINDICATOR, DEFAULT_RXINDICATOR}, {
+ TXCMD, DEFAULT_TXCMD}, {
+ TXBS, DEFAULT_TXBS}, {
+ TXDES0, DEFAULT_TXDES0}, {
+ TXDES1, DEFAULT_TXDES1}, {
+ TXDES2, DEFAULT_TXDES2}, {
+ TXDES3, DEFAULT_TXDES3}, {
+ TXCFG, DEFAULT_TXCFG}, {
+ MACCFG2, DEFAULT_MACCFG2}, {
+ MACCFG3, DEFAULT_MACCFG3}, {
+ TXLEN, DEFAULT_TXLEN}, {
+ RXBTHD0, DEFAULT_RXBTHD0}, {
+ RXBTHD1, DEFAULT_RXBTHD1}, {
+ RXFULTHD, DEFAULT_RXFULTHD}, {
+ DOGTHD0, DEFAULT_DOGTHD0}, {
+ DOGTHD1, DEFAULT_DOGTHD1},};
+
+ OUTW (dev, MISC_RESET_MAC, MISC);
+ tmpval = INW (dev, MISC);
+
+ for (i = 0; i < (sizeof (program_seq) / sizeof (program_seq[0])); i++)
+ OUTW (dev, program_seq[i].value, program_seq[i].offset);
+}
+
+static int ax88180_poll_tx_complete (struct eth_device *dev)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long tmpval, txbs_txdp;
+ int TimeOutCnt = 10000;
+
+ txbs_txdp = 1 << priv->NextTxDesc;
+
+ while (TimeOutCnt--) {
+
+ tmpval = INW (dev, TXBS);
+
+ if ((tmpval & txbs_txdp) == 0)
+ break;
+
+ udelay (100);
+ }
+
+ if (TimeOutCnt)
+ return 0;
+ else
+ return -TimeOutCnt;
+}
+
+static void ax88180_rx_handler (struct eth_device *dev)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long data_size;
+ unsigned short rxcurt_ptr, rxbound_ptr, next_ptr;
+ int i;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+ unsigned short *rxdata = (unsigned short *)NetRxPackets[0];
+#else
+ unsigned long *rxdata = (unsigned long *)NetRxPackets[0];
+#endif
+ unsigned short count;
+
+ rxcurt_ptr = INW (dev, RXCURT);
+ rxbound_ptr = INW (dev, RXBOUND);
+ next_ptr = (rxbound_ptr + 1) & RX_PAGE_NUM_MASK;
+
+ debug ("ax88180: RX original RXBOUND=0x%04x,"
+ " RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+
+ while (next_ptr != rxcurt_ptr) {
+
+ OUTW (dev, RX_START_READ, RXINDICATOR);
+
+ data_size = READ_RXBUF (dev) & 0xFFFF;
+
+ if ((data_size == 0) || (data_size > MAX_RX_SIZE)) {
+
+ OUTW (dev, RX_STOP_READ, RXINDICATOR);
+
+ ax88180_mac_reset (dev);
+ printf ("ax88180: Invalid Rx packet length!"
+ " (len=0x%04lx)\n", data_size);
+
+ debug ("ax88180: RX RXBOUND=0x%04x,"
+ "RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+ return;
+ }
+
+ rxbound_ptr += (((data_size + 0xF) & 0xFFF0) >> 4) + 1;
+ rxbound_ptr &= RX_PAGE_NUM_MASK;
+
+ /* Comput access times */
+ count = (data_size + priv->PadSize) >> priv->BusWidth;
+
+ for (i = 0; i < count; i++) {
+ *(rxdata + i) = READ_RXBUF (dev);
+ }
+
+ OUTW (dev, RX_STOP_READ, RXINDICATOR);
+
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], data_size);
+
+ OUTW (dev, rxbound_ptr, RXBOUND);
+
+ rxcurt_ptr = INW (dev, RXCURT);
+ rxbound_ptr = INW (dev, RXBOUND);
+ next_ptr = (rxbound_ptr + 1) & RX_PAGE_NUM_MASK;
+
+ debug ("ax88180: RX updated RXBOUND=0x%04x,"
+ "RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+ }
+
+ return;
+}
+
+static int ax88180_phy_initial (struct eth_device *dev)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long tmp_regval;
+
+ /* Check avaliable PHY chipset */
+ priv->PhyAddr = MARVELL_88E1111_PHYADDR;
+ priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+
+ if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
+
+ debug ("ax88180: Found Marvell 88E1111 PHY."
+ " (PHY Addr=0x%x)\n", priv->PhyAddr);
+
+ tmp_regval = ax88180_mdio_read (dev, M88_EXT_SSR);
+ if ((tmp_regval & HWCFG_MODE_MASK) == RGMII_COPPER_MODE) {
+
+ ax88180_mdio_write (dev, M88_EXT_SCR, DEFAULT_EXT_SCR);
+ if (ax88180_phy_reset (dev) < 0)
+ return 0;
+ ax88180_mdio_write (dev, M88_IER, LINK_CHANGE_INT);
+ }
+ } else {
+
+ priv->PhyAddr = CICADA_CIS8201_PHYADDR;
+ priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+
+ if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
+
+ debug ("ax88180: Found CICADA CIS8201 PHY"
+ " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr);
+ ax88180_mdio_write (dev, CIS_IMR,
+ (CIS_INT_ENABLE | LINK_CHANGE_INT));
+
+ /* Set CIS_SMI_PRIORITY bit before force the media mode */
+ tmp_regval =
+ ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS);
+ tmp_regval &= ~CIS_SMI_PRIORITY;
+ ax88180_mdio_write (dev, CIS_AUX_CTRL_STATUS,
+ tmp_regval);
+ } else {
+ printf ("ax88180: Unknown PHY chipset!!\n");
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static void ax88180_meidia_config (struct eth_device *dev)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long bmcr_val, bmsr_val;
+ unsigned long rxcfg_val, maccfg0_val, maccfg1_val;
+ unsigned long RealMediaMode;
+ int i;
+
+ /* Waiting 2 seconds for PHY link stable */
+ for (i = 0; i < 20000; i++) {
+ bmsr_val = ax88180_mdio_read (dev, BMSR);
+ if (bmsr_val & LINKOK) {
+ break;
+ }
+ udelay (100);
+ }
+
+ bmsr_val = ax88180_mdio_read (dev, BMSR);
+ debug ("ax88180: BMSR=0x%04x\n", (unsigned int)bmsr_val);
+
+ if (bmsr_val & LINKOK) {
+ bmcr_val = ax88180_mdio_read (dev, BMCR);
+
+ if (bmcr_val & AUTONEG_EN) {
+
+ /*
+ * Waiting for Auto-negotiation completion, this may
+ * take up to 5 seconds.
+ */
+ debug ("ax88180: Auto-negotiation is "
+ "enabled. Waiting for NWay completion..\n");
+ for (i = 0; i < 50000; i++) {
+ bmsr_val = ax88180_mdio_read (dev, BMSR);
+ if (bmsr_val & AUTONEG_COMPLETE) {
+ break;
+ }
+ udelay (100);
+ }
+ } else
+ debug ("ax88180: Auto-negotiation is disabled.\n");
+
+ debug ("ax88180: BMCR=0x%04x, BMSR=0x%04x\n",
+ (unsigned int)bmcr_val, (unsigned int)bmsr_val);
+
+ /* Get real media mode here */
+ if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
+ RealMediaMode = get_MarvellPHY_meida_mode (dev);
+ } else if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
+ RealMediaMode = get_CicadaPHY_meida_mode (dev);
+ } else {
+ RealMediaMode = MEDIA_1000FULL;
+ }
+
+ priv->LinkState = INS_LINK_UP;
+
+ switch (RealMediaMode) {
+ case MEDIA_1000FULL:
+ debug ("ax88180: 1000Mbps Full-duplex mode.\n");
+ rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+ maccfg0_val = TXFLOW_ENABLE | DEFAULT_MACCFG0;
+ maccfg1_val = GIGA_MODE_EN | RXFLOW_EN |
+ FULLDUPLEX | DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_1000HALF:
+ debug ("ax88180: 1000Mbps Half-duplex mode.\n");
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = DEFAULT_MACCFG0;
+ maccfg1_val = GIGA_MODE_EN | DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_100FULL:
+ debug ("ax88180: 100Mbps Full-duplex mode.\n");
+ rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+ maccfg0_val = SPEED100 | TXFLOW_ENABLE
+ | DEFAULT_MACCFG0;
+ maccfg1_val = RXFLOW_EN | FULLDUPLEX | DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_100HALF:
+ debug ("ax88180: 100Mbps Half-duplex mode.\n");
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = SPEED100 | DEFAULT_MACCFG0;
+ maccfg1_val = DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_10FULL:
+ debug ("ax88180: 10Mbps Full-duplex mode.\n");
+ rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+ maccfg0_val = TXFLOW_ENABLE | DEFAULT_MACCFG0;
+ maccfg1_val = RXFLOW_EN | FULLDUPLEX | DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_10HALF:
+ debug ("ax88180: 10Mbps Half-duplex mode.\n");
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = DEFAULT_MACCFG0;
+ maccfg1_val = DEFAULT_MACCFG1;
+ break;
+ default:
+ debug ("ax88180: Unknow media mode.\n");
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = DEFAULT_MACCFG0;
+ maccfg1_val = DEFAULT_MACCFG1;
+
+ priv->LinkState = INS_LINK_DOWN;
+ break;
+ }
+
+ } else {
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = DEFAULT_MACCFG0;
+ maccfg1_val = DEFAULT_MACCFG1;
+
+ priv->LinkState = INS_LINK_DOWN;
+ }
+
+ OUTW (dev, rxcfg_val, RXCFG);
+ OUTW (dev, maccfg0_val, MACCFG0);
+ OUTW (dev, maccfg1_val, MACCFG1);
+
+ return;
+}
+
+static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev)
+{
+ unsigned long m88_ssr;
+ unsigned long MediaMode;
+
+ m88_ssr = ax88180_mdio_read (dev, M88_SSR);
+ switch (m88_ssr & SSR_MEDIA_MASK) {
+ case SSR_1000FULL:
+ MediaMode = MEDIA_1000FULL;
+ break;
+ case SSR_1000HALF:
+ MediaMode = MEDIA_1000HALF;
+ break;
+ case SSR_100FULL:
+ MediaMode = MEDIA_100FULL;
+ break;
+ case SSR_100HALF:
+ MediaMode = MEDIA_100HALF;
+ break;
+ case SSR_10FULL:
+ MediaMode = MEDIA_10FULL;
+ break;
+ case SSR_10HALF:
+ MediaMode = MEDIA_10HALF;
+ break;
+ default:
+ MediaMode = MEDIA_UNKNOWN;
+ break;
+ }
+
+ return MediaMode;
+}
+
+static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev)
+{
+ unsigned long tmp_regval;
+ unsigned long MediaMode;
+
+ tmp_regval = ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS);
+ switch (tmp_regval & CIS_MEDIA_MASK) {
+ case CIS_1000FULL:
+ MediaMode = MEDIA_1000FULL;
+ break;
+ case CIS_1000HALF:
+ MediaMode = MEDIA_1000HALF;
+ break;
+ case CIS_100FULL:
+ MediaMode = MEDIA_100FULL;
+ break;
+ case CIS_100HALF:
+ MediaMode = MEDIA_100HALF;
+ break;
+ case CIS_10FULL:
+ MediaMode = MEDIA_10FULL;
+ break;
+ case CIS_10HALF:
+ MediaMode = MEDIA_10HALF;
+ break;
+ default:
+ MediaMode = MEDIA_UNKNOWN;
+ break;
+ }
+
+ return MediaMode;
+}
+
+static void ax88180_halt (struct eth_device *dev)
+{
+ /* Disable AX88180 TX/RX functions */
+ OUTW (dev, WAKEMOD, CMD);
+}
+
+static int ax88180_init (struct eth_device *dev, bd_t * bd)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned short tmp_regval;
+
+ ax88180_mac_reset (dev);
+
+ /* Disable interrupt */
+ OUTW (dev, CLEAR_IMR, IMR);
+
+ /* Disable AX88180 TX/RX functions */
+ OUTW (dev, WAKEMOD, CMD);
+
+ /* Fill the MAC address */
+ tmp_regval =
+ dev->enetaddr[0] | (((unsigned short)dev->enetaddr[1]) << 8);
+ OUTW (dev, tmp_regval, MACID0);
+
+ tmp_regval =
+ dev->enetaddr[2] | (((unsigned short)dev->enetaddr[3]) << 8);
+ OUTW (dev, tmp_regval, MACID1);
+
+ tmp_regval =
+ dev->enetaddr[4] | (((unsigned short)dev->enetaddr[5]) << 8);
+ OUTW (dev, tmp_regval, MACID2);
+
+ ax88180_meidia_config (dev);
+
+ OUTW (dev, DEFAULT_RXFILTER, RXFILTER);
+
+ /* Initial variables here */
+ priv->FirstTxDesc = TXDP0;
+ priv->NextTxDesc = TXDP0;
+
+ /* Check if there is any invalid interrupt status and clear it. */
+ OUTW (dev, INW (dev, ISR), ISR);
+
+ /* Start AX88180 TX/RX functions */
+ OUTW (dev, (RXEN | TXEN | WAKEMOD), CMD);
+
+ return 0;
+}
+
+/* Get a data block via Ethernet */
+static int ax88180_recv (struct eth_device *dev)
+{
+ unsigned short ISR_Status;
+ unsigned short tmp_regval;
+
+ /* Read and check interrupt status here. */
+ ISR_Status = INW (dev, ISR);
+
+ while (ISR_Status) {
+ /* Clear the interrupt status */
+ OUTW (dev, ISR_Status, ISR);
+
+ debug ("\nax88180: The interrupt status = 0x%04x\n",
+ ISR_Status);
+
+ if (ISR_Status & ISR_PHY) {
+ /* Read ISR register once to clear PHY interrupt bit */
+ tmp_regval = ax88180_mdio_read (dev, M88_ISR);
+ ax88180_meidia_config (dev);
+ }
+
+ if ((ISR_Status & ISR_RX) || (ISR_Status & ISR_RXBUFFOVR)) {
+ ax88180_rx_handler (dev);
+ }
+
+ /* Read and check interrupt status again */
+ ISR_Status = INW (dev, ISR);
+ }
+
+ return 0;
+}
+
+/* Send a data block via Ethernet. */
+static int
+ax88180_send (struct eth_device *dev, volatile void *packet, int length)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned short TXDES_addr;
+ unsigned short txcmd_txdp, txbs_txdp;
+ unsigned short tmp_data;
+ int i;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+ volatile unsigned short *txdata = (volatile unsigned short *)packet;
+#else
+ volatile unsigned long *txdata = (volatile unsigned long *)packet;
+#endif
+ unsigned short count;
+
+ if (priv->LinkState != INS_LINK_UP) {
+ return 0;
+ }
+
+ priv->FirstTxDesc = priv->NextTxDesc;
+ txbs_txdp = 1 << priv->FirstTxDesc;
+
+ debug ("ax88180: TXDP%d is available\n", priv->FirstTxDesc);
+
+ txcmd_txdp = priv->FirstTxDesc << 13;
+ TXDES_addr = TXDES0 + (priv->FirstTxDesc << 2);
+
+ OUTW (dev, (txcmd_txdp | length | TX_START_WRITE), TXCMD);
+
+ /* Comput access times */
+ count = (length + priv->PadSize) >> priv->BusWidth;
+
+ for (i = 0; i < count; i++) {
+ WRITE_TXBUF (dev, *(txdata + i));
+ }
+
+ OUTW (dev, txcmd_txdp | length, TXCMD);
+ OUTW (dev, txbs_txdp, TXBS);
+ OUTW (dev, (TXDPx_ENABLE | length), TXDES_addr);
+
+ priv->NextTxDesc = (priv->NextTxDesc + 1) & TXDP_MASK;
+
+ /*
+ * Check the available transmit descriptor, if we had exhausted all
+ * transmit descriptor ,then we have to wait for at least one free
+ * descriptor
+ */
+ txbs_txdp = 1 << priv->NextTxDesc;
+ tmp_data = INW (dev, TXBS);
+
+ if (tmp_data & txbs_txdp) {
+ if (ax88180_poll_tx_complete (dev) < 0) {
+ ax88180_mac_reset (dev);
+ priv->FirstTxDesc = TXDP0;
+ priv->NextTxDesc = TXDP0;
+ printf ("ax88180: Transmit time out occurred!\n");
+ }
+ }
+
+ return 0;
+}
+
+static void ax88180_read_mac_addr (struct eth_device *dev)
+{
+ unsigned short macid0_val, macid1_val, macid2_val;
+ unsigned short tmp_regval;
+ unsigned short i;
+
+ /* Reload MAC address from EEPROM */
+ OUTW (dev, RELOAD_EEPROM, PROMCTRL);
+
+ /* Waiting for reload eeprom completion */
+ for (i = 0; i < 500; i++) {
+ tmp_regval = INW (dev, PROMCTRL);
+ if ((tmp_regval & RELOAD_EEPROM) == 0)
+ break;
+ udelay (1000);
+ }
+
+ /* Get MAC addresses */
+ macid0_val = INW (dev, MACID0);
+ macid1_val = INW (dev, MACID1);
+ macid2_val = INW (dev, MACID2);
+
+ if (((macid0_val | macid1_val | macid2_val) != 0) &&
+ ((macid0_val & 0x01) == 0)) {
+ dev->enetaddr[0] = (unsigned char)macid0_val;
+ dev->enetaddr[1] = (unsigned char)(macid0_val >> 8);
+ dev->enetaddr[2] = (unsigned char)macid1_val;
+ dev->enetaddr[3] = (unsigned char)(macid1_val >> 8);
+ dev->enetaddr[4] = (unsigned char)macid2_val;
+ dev->enetaddr[5] = (unsigned char)(macid2_val >> 8);
+ }
+}
+
+/*
+===========================================================================
+<<<<<< Exported SubProgram Bodies >>>>>>
+===========================================================================
+*/
+int ax88180_initialize (bd_t * bis)
+{
+ struct eth_device *dev;
+ struct ax88180_private *priv;
+
+ dev = (struct eth_device *)malloc (sizeof *dev);
+
+ if (NULL == dev)
+ return 0;
+
+ memset (dev, 0, sizeof *dev);
+
+ priv = (struct ax88180_private *)malloc (sizeof (*priv));
+
+ if (NULL == priv)
+ return 0;
+
+ memset (priv, 0, sizeof *priv);
+
+ sprintf (dev->name, "ax88180");
+ dev->iobase = AX88180_BASE;
+ dev->priv = priv;
+ dev->init = ax88180_init;
+ dev->halt = ax88180_halt;
+ dev->send = ax88180_send;
+ dev->recv = ax88180_recv;
+
+ priv->BusWidth = BUS_WIDTH_32;
+ priv->PadSize = 3;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+ OUTW (dev, (START_BASE >> 8), BASE);
+ OUTW (dev, DECODE_EN, DECODE);
+
+ priv->BusWidth = BUS_WIDTH_16;
+ priv->PadSize = 1;
+#endif
+
+ ax88180_mac_reset (dev);
+
+ /* Disable interrupt */
+ OUTW (dev, CLEAR_IMR, IMR);
+
+ /* Disable AX88180 TX/RX functions */
+ OUTW (dev, WAKEMOD, CMD);
+
+ ax88180_read_mac_addr (dev);
+
+ eth_register (dev);
+
+ return ax88180_phy_initial (dev);
+
+}
diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h
new file mode 100644
index 0000000..5254e7d
--- /dev/null
+++ b/drivers/net/ax88180.h
@@ -0,0 +1,412 @@
+/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */
+/*
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _AX88180_H_
+#define _AX88180_H_
+
+#include <asm/types.h>
+#include <config.h>
+
+typedef enum _ax88180_link_state {
+ INS_LINK_DOWN,
+ INS_LINK_UP,
+ INS_LINK_UNKNOWN
+} ax88180_link_state;
+
+struct ax88180_private {
+ unsigned char BusWidth;
+ unsigned char PadSize;
+ unsigned short PhyAddr;
+ unsigned short PhyID0;
+ unsigned short FirstTxDesc;
+ unsigned short NextTxDesc;
+ ax88180_link_state LinkState;
+};
+
+#define BUS_WIDTH_16 1
+#define BUS_WIDTH_32 2
+
+#define ENABLE_JUMBO 1
+#define DISABLE_JUMBO 0
+
+#define ENABLE_BURST 1
+#define DISABLE_BURST 0
+
+#define NORMAL_RX_MODE 0
+#define RX_LOOPBACK_MODE 1
+#define RX_INIFINIT_LOOP_MODE 2
+#define TX_INIFINIT_LOOP_MODE 3
+
+#define DEFAULT_ETH_MTU 1500
+
+/* Jumbo packet size 4086 bytes included 4 bytes CRC*/
+#define MAX_JUMBO_MTU 4072
+
+/* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */
+#define MAX_TX_JUMBO_SIZE 4086
+
+/* Max Rx Jumbo size is 15K Bytes */
+#define MAX_RX_SIZE 0x3C00
+
+#define MARVELL_88E1111_PHYADDR 0x18
+#define MARVELL_88E1111_PHYIDR0 0x0141
+
+#define CICADA_CIS8201_PHYADDR 0x01
+#define CICADA_CIS8201_PHYIDR0 0x000F
+
+#define MEDIA_AUTO 0
+#define MEDIA_1000FULL 1
+#define MEDIA_1000HALF 2
+#define MEDIA_100FULL 3
+#define MEDIA_100HALF 4
+#define MEDIA_10FULL 5
+#define MEDIA_10HALF 6
+#define MEDIA_UNKNOWN 7
+
+#define AUTO_MEDIA 0
+#define FORCE_MEDIA 1
+
+#define TXDP_MASK 3
+#define TXDP0 0
+#define TXDP1 1
+#define TXDP2 2
+#define TXDP3 3
+
+#define CMD_MAP_SIZE 0x100
+
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+ #define AX88180_MEMORY_SIZE 0x00004000
+ #define START_BASE 0x1000
+
+ #define RX_BUF_SIZE 0x1000
+ #define TX_BUF_SIZE 0x0F00
+
+ #define TX_BASE START_BASE
+ #define CMD_BASE (TX_BASE + TX_BUF_SIZE)
+ #define RX_BASE (CMD_BASE + CMD_MAP_SIZE)
+#else
+ #define AX88180_MEMORY_SIZE 0x00010000
+
+ #define RX_BUF_SIZE 0x8000
+ #define TX_BUF_SIZE 0x7C00
+
+ #define RX_BASE 0x0000
+ #define TX_BASE (RX_BASE + RX_BUF_SIZE)
+ #define CMD_BASE (TX_BASE + TX_BUF_SIZE)
+#endif
+
+/* AX88180 Memory Mapping Definition */
+#define RXBUFFER_START RX_BASE
+ #define RX_PACKET_LEN_OFFSET 0
+ #define RX_PAGE_NUM_MASK 0x7FF /* RX pages 0~7FFh */
+#define TXBUFFER_START TX_BASE
+
+/* AX88180 MAC Register Definition */
+#define DECODE (0)
+ #define DECODE_EN 0x00000001
+#define BASE (6)
+#define CMD (CMD_BASE + 0x0000)
+ #define WAKEMOD 0x00000001
+ #define TXEN 0x00000100
+ #define RXEN 0x00000200
+ #define DEFAULT_CMD WAKEMOD
+#define IMR (CMD_BASE + 0x0004)
+ #define IMR_RXBUFFOVR 0x00000001
+ #define IMR_WATCHDOG 0x00000002
+ #define IMR_TX 0x00000008
+ #define IMR_RX 0x00000010
+ #define IMR_PHY 0x00000020
+ #define CLEAR_IMR 0x00000000
+ #define DEFAULT_IMR (IMR_PHY | IMR_RX | IMR_TX |\
+ IMR_RXBUFFOVR | IMR_WATCHDOG)
+#define ISR (CMD_BASE + 0x0008)
+ #define ISR_RXBUFFOVR 0x00000001
+ #define ISR_WATCHDOG 0x00000002
+ #define ISR_TX 0x00000008
+ #define ISR_RX 0x00000010
+ #define ISR_PHY 0x00000020
+#define TXCFG (CMD_BASE + 0x0010)
+ #define AUTOPAD_CRC 0x00000050
+ #define DEFAULT_TXCFG AUTOPAD_CRC
+#define TXCMD (CMD_BASE + 0x0014)
+ #define TXCMD_TXDP_MASK 0x00006000
+ #define TXCMD_TXDP0 0x00000000
+ #define TXCMD_TXDP1 0x00002000
+ #define TXCMD_TXDP2 0x00004000
+ #define TXCMD_TXDP3 0x00006000
+ #define TX_START_WRITE 0x00008000
+ #define TX_STOP_WRITE 0x00000000
+ #define DEFAULT_TXCMD 0x00000000
+#define TXBS (CMD_BASE + 0x0018)
+ #define TXDP0_USED 0x00000001
+ #define TXDP1_USED 0x00000002
+ #define TXDP2_USED 0x00000004
+ #define TXDP3_USED 0x00000008
+ #define DEFAULT_TXBS 0x00000000
+#define TXDES0 (CMD_BASE + 0x0020)
+ #define TXDPx_ENABLE 0x00008000
+ #define TXDPx_LEN_MASK 0x00001FFF
+ #define DEFAULT_TXDES0 0x00000000
+#define TXDES1 (CMD_BASE + 0x0024)
+ #define TXDPx_ENABLE 0x00008000
+ #define TXDPx_LEN_MASK 0x00001FFF
+ #define DEFAULT_TXDES1 0x00000000
+#define TXDES2 (CMD_BASE + 0x0028)
+ #define TXDPx_ENABLE 0x00008000
+ #define TXDPx_LEN_MASK 0x00001FFF
+ #define DEFAULT_TXDES2 0x00000000
+#define TXDES3 (CMD_BASE + 0x002C)
+ #define TXDPx_ENABLE 0x00008000
+ #define TXDPx_LEN_MASK 0x00001FFF
+ #define DEFAULT_TXDES3 0x00000000
+#define RXCFG (CMD_BASE + 0x0030)
+ #define RXBUFF_PROTECT 0x00000001
+ #define RXTCPCRC_CHECK 0x00000010
+ #define RXFLOW_ENABLE 0x00000100
+ #define DEFAULT_RXCFG RXBUFF_PROTECT
+#define RXCURT (CMD_BASE + 0x0034)
+ #define DEFAULT_RXCURT 0x00000000
+#define RXBOUND (CMD_BASE + 0x0038)
+ #define DEFAULT_RXBOUND 0x7FF //RX pages 0~7FFh
+#define MACCFG0 (CMD_BASE + 0x0040)
+ #define MACCFG0_BIT3_0 0x00000007
+ #define IPGT_VAL 0x00000150
+ #define TXFLOW_ENABLE 0x00001000
+ #define SPEED100 0x00008000
+ #define DEFAULT_MACCFG0 (IPGT_VAL | MACCFG0_BIT3_0)
+#define MACCFG1 (CMD_BASE + 0x0044)
+ #define RGMII_EN 0x00000002
+ #define RXFLOW_EN 0x00000020
+ #define FULLDUPLEX 0x00000040
+ #define MAX_JUMBO_LEN 0x00000780
+ #define RXJUMBO_EN 0x00000800
+ #define GIGA_MODE_EN 0x00001000
+ #define RXCRC_CHECK 0x00002000
+ #define RXPAUSE_DA_CHECK 0x00004000
+
+ #define JUMBO_LEN_4K 0x00000200
+ #define JUMBO_LEN_15K 0x00000780
+ #define DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK | \
+ RGMII_EN)
+ #define CICADA_DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK)
+#define MACCFG2 (CMD_BASE + 0x0048)
+ #define MACCFG2_BIT15_8 0x00000100
+ #define JAM_LIMIT_MASK 0x000000FC
+ #define DEFAULT_JAM_LIMIT 0x00000064
+ #define DEFAULT_MACCFG2 MACCFG2_BIT15_8
+#define MACCFG3 (CMD_BASE + 0x004C)
+ #define IPGR2_VAL 0x0000000E
+ #define IPGR1_VAL 0x00000600
+ #define NOABORT 0x00008000
+ #define DEFAULT_MACCFG3 (IPGR1_VAL | IPGR2_VAL)
+#define TXPAUT (CMD_BASE + 0x0054)
+ #define DEFAULT_TXPAUT 0x001FE000
+#define RXBTHD0 (CMD_BASE + 0x0058)
+ #define DEFAULT_RXBTHD0 0x00000300
+#define RXBTHD1 (CMD_BASE + 0x005C)
+ #define DEFAULT_RXBTHD1 0x00000600
+#define RXFULTHD (CMD_BASE + 0x0060)
+ #define DEFAULT_RXFULTHD 0x00000100
+#define MISC (CMD_BASE + 0x0068)
+ /* Normal operation mode */
+ #define MISC_NORMAL 0x00000003
+ /* Clear bit 0 to reset MAC */
+ #define MISC_RESET_MAC 0x00000002
+ /* Clear bit 1 to reset PHY */
+ #define MISC_RESET_PHY 0x00000001
+ /* Clear bit 0 and 1 to reset MAC and PHY */
+ #define MISC_RESET_MAC_PHY 0x00000000
+ #define DEFAULT_MISC MISC_NORMAL
+#define MACID0 (CMD_BASE + 0x0070)
+#define MACID1 (CMD_BASE + 0x0074)
+#define MACID2 (CMD_BASE + 0x0078)
+#define TXLEN (CMD_BASE + 0x007C)
+ #define DEFAULT_TXLEN 0x000005FC
+#define RXFILTER (CMD_BASE + 0x0080)
+ #define RX_RXANY 0x00000001
+ #define RX_MULTICAST 0x00000002
+ #define RX_UNICAST 0x00000004
+ #define RX_BROADCAST 0x00000008
+ #define RX_MULTI_HASH 0x00000010
+ #define DISABLE_RXFILTER 0x00000000
+ #define DEFAULT_RXFILTER (RX_BROADCAST + RX_UNICAST)
+#define MDIOCTRL (CMD_BASE + 0x0084)
+ #define PHY_ADDR_MASK 0x0000001F
+ #define REG_ADDR_MASK 0x00001F00
+ #define READ_PHY 0x00004000
+ #define WRITE_PHY 0x00008000
+#define MDIODP (CMD_BASE + 0x0088)
+#define GPIOCTRL (CMD_BASE + 0x008C)
+#define RXINDICATOR (CMD_BASE + 0x0090)
+ #define RX_START_READ 0x00000001
+ #define RX_STOP_READ 0x00000000
+ #define DEFAULT_RXINDICATOR RX_STOP_READ
+#define TXST (CMD_BASE + 0x0094)
+#define MDCCLKPAT (CMD_BASE + 0x00A0)
+#define RXIPCRCCNT (CMD_BASE + 0x00A4)
+#define RXCRCCNT (CMD_BASE + 0x00A8)
+#define TXFAILCNT (CMD_BASE + 0x00AC)
+#define PROMDP (CMD_BASE + 0x00B0)
+#define PROMCTRL (CMD_BASE + 0x00B4)
+ #define RELOAD_EEPROM 0x00000200
+#define MAXRXLEN (CMD_BASE + 0x00B8)
+#define HASHTAB0 (CMD_BASE + 0x00C0)
+#define HASHTAB1 (CMD_BASE + 0x00C4)
+#define HASHTAB2 (CMD_BASE + 0x00C8)
+#define HASHTAB3 (CMD_BASE + 0x00CC)
+#define DOGTHD0 (CMD_BASE + 0x00E0)
+ #define DEFAULT_DOGTHD0 0x0000FFFF
+#define DOGTHD1 (CMD_BASE + 0x00E4)
+ #define START_WATCHDOG_TIMER 0x00008000
+ #define DEFAULT_DOGTHD1 0x00000FFF
+#define SOFTRST (CMD_BASE + 0x00EC)
+ #define SOFTRST_NORMAL 0x00000003
+ #define SOFTRST_RESET_MAC 0x00000002
+
+/* External PHY Register Definition */
+#define BMCR 0x0000
+ #define LINE_SPEED_MSB 0x0040
+ #define DUPLEX_MODE 0x0100
+ #define RESTART_AUTONEG 0x0200
+ #define POWER_DOWN 0x0800
+ #define AUTONEG_EN 0x1000
+ #define LINE_SPEED_LSB 0x2000
+ #define PHY_RESET 0x8000
+
+ #define MEDIAMODE_MASK (LINE_SPEED_MSB | LINE_SPEED_LSB |\
+ DUPLEX_MODE)
+ #define BMCR_SPEED_1000 LINE_SPEED_MSB
+ #define BMCR_SPEED_100 LINE_SPEED_LSB
+ #define BMCR_SPEED_10 0x0000
+
+ #define BMCR_1000FULL (BMCR_SPEED_1000 | DUPLEX_MODE)
+ #define BMCR_100FULL (BMCR_SPEED_100 | DUPLEX_MODE)
+ #define BMCR_100HALF BMCR_SPEED_100
+ #define BMCR_10FULL DUPLEX_MODE
+ #define BMCR_10HALF 0x0000
+#define BMSR 0x0001
+ #define LINKOK 0x0004
+ #define AUTONEG_ENABLE_STS 0x0008
+ #define AUTONEG_COMPLETE 0x0020
+#define PHYIDR0 0x0002
+#define PHYIDR1 0x0003
+#define ANAR 0x0004
+ #define ANAR_PAUSE 0x0400
+ #define ANAR_100FULL 0x0100
+ #define ANAR_100HALF 0x0080
+ #define ANAR_10FULL 0x0040
+ #define ANAR_10HALF 0x0020
+ #define ANAR_8023BIT 0x0001
+#define ANLPAR 0x0005
+#define ANER 0x0006
+#define AUX_1000_CTRL 0x0009
+ #define ENABLE_1000HALF 0x0100
+ #define ENABLE_1000FULL 0x0200
+ #define DEFAULT_AUX_1000_CTRL (ENABLE_1000HALF | ENABLE_1000FULL)
+#define AUX_1000_STATUS 0x000A
+ #define LP_1000HALF 0x0400
+ #define LP_1000FULL 0x0800
+
+/* Marvell 88E1111 Gigabit PHY Register Definition */
+#define M88_SSR 0x0011
+ #define SSR_SPEED_MASK 0xC000
+ #define SSR_SPEED_1000 0x8000
+ #define SSR_SPEED_100 0x4000
+ #define SSR_SPEED_10 0x0000
+ #define SSR_DUPLEX 0x2000
+ #define SSR_MEDIA_RESOLVED_OK 0x0800
+
+ #define SSR_MEDIA_MASK (SSR_SPEED_MASK | SSR_DUPLEX)
+ #define SSR_1000FULL (SSR_SPEED_1000 | SSR_DUPLEX)
+ #define SSR_1000HALF SSR_SPEED_1000
+ #define SSR_100FULL (SSR_SPEED_100 | SSR_DUPLEX)
+ #define SSR_100HALF SSR_SPEED_100
+ #define SSR_10FULL (SSR_SPEED_10 | SSR_DUPLEX)
+ #define SSR_10HALF SSR_SPEED_10
+#define M88_IER 0x0012
+ #define LINK_CHANGE_INT 0x0400
+#define M88_ISR 0x0013
+ #define LINK_CHANGE_STATUS 0x0400
+#define M88_EXT_SCR 0x0014
+ #define RGMII_RXCLK_DELAY 0x0080
+ #define RGMII_TXCLK_DELAY 0x0002
+ #define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY)
+#define M88_EXT_SSR 0x001B
+ #define HWCFG_MODE_MASK 0x000F
+ #define RGMII_COPPER_MODE 0x000B
+
+/* CICADA CIS8201 Gigabit PHY Register Definition */
+#define CIS_IMR 0x0019
+ #define CIS_INT_ENABLE 0x8000
+ #define CIS_LINK_CHANGE_INT 0x2000
+#define CIS_ISR 0x001A
+ #define CIS_INT_PENDING 0x8000
+ #define CIS_LINK_CHANGE_STATUS 0x2000
+#define CIS_AUX_CTRL_STATUS 0x001C
+ #define CIS_AUTONEG_COMPLETE 0x8000
+ #define CIS_SPEED_MASK 0x0018
+ #define CIS_SPEED_1000 0x0010
+ #define CIS_SPEED_100 0x0008
+ #define CIS_SPEED_10 0x0000
+ #define CIS_DUPLEX 0x0020
+
+ #define CIS_MEDIA_MASK (CIS_SPEED_MASK | CIS_DUPLEX)
+ #define CIS_1000FULL (CIS_SPEED_1000 | CIS_DUPLEX)
+ #define CIS_1000HALF CIS_SPEED_1000
+ #define CIS_100FULL (CIS_SPEED_100 | CIS_DUPLEX)
+ #define CIS_100HALF CIS_SPEED_100
+ #define CIS_10FULL (CIS_SPEED_10 | CIS_DUPLEX)
+ #define CIS_10HALF CIS_SPEED_10
+ #define CIS_SMI_PRIORITY 0x0004
+
+static inline unsigned short INW (struct eth_device *dev, unsigned long addr)
+{
+ return le16_to_cpu (*(volatile unsigned short *) (addr + dev->iobase));
+}
+
+static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
+{
+ *(volatile unsigned short *) ((addr + dev->iobase)) = cpu_to_le16 (command);
+}
+
+/*
+ Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer
+*/
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+static inline unsigned short READ_RXBUF (struct eth_device *dev)
+{
+ return le16_to_cpu (*(volatile unsigned short *) (RXBUFFER_START + dev->iobase));
+}
+
+static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data)
+{
+ *(volatile unsigned short *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le16 (data);
+}
+#else
+static inline unsigned long READ_RXBUF (struct eth_device *dev)
+{
+ return le32_to_cpu (*(volatile unsigned long *) (RXBUFFER_START + dev->iobase));
+}
+
+static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data)
+{
+ *(volatile unsigned long *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le32 (data);
+}
+#endif
+
+#endif /* _AX88180_H_ */