ARC: HSDK: introduce CREG GPIO driver
The HSDK can manage some pins via CREG registers block.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index b167b02..2a20b94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -59,6 +59,12 @@
T: git git://git.denx.de/u-boot-arc.git
F: arch/arc/
+ARC HSDK CREG GPIO
+M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+S: Maintained
+L: uboot-snps-arc@synopsys.com
+F: drivers/gpio/hsdk-creg-gpio.c
+
ARM
M: Albert Aribaud <albert.u.boot@aribaud.net>
S: Maintained
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 6240c39..2acb33b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -80,6 +80,13 @@
help
This driver supports i.MX7ULP Rapid GPIO2P controller.
+config HSDK_CREG_GPIO
+ bool "HSDK CREG GPIO griver"
+ depends on DM
+ default n
+ help
+ This driver supports CREG GPIOs on Synopsys HSDK SOC.
+
config LPC32XX_GPIO
bool "LPC32XX GPIO driver"
depends on DM
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 81f55a5..201d7bf 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -54,6 +54,7 @@
obj-$(CONFIG_ZYNQ_GPIO) += zynq_gpio.o
obj-$(CONFIG_VYBRID_GPIO) += vybrid_gpio.o
obj-$(CONFIG_HIKEY_GPIO) += hi6220_gpio.o
+obj-$(CONFIG_HSDK_CREG_GPIO) += hsdk-creg-gpio.o
obj-$(CONFIG_IMX_RGPIO2P) += imx_rgpio2p.o
obj-$(CONFIG_PIC32_GPIO) += pic32_gpio.o
obj-$(CONFIG_MVEBU_GPIO) += mvebu_gpio.o
diff --git a/drivers/gpio/hsdk-creg-gpio.c b/drivers/gpio/hsdk-creg-gpio.c
new file mode 100644
index 0000000..8ca807a
--- /dev/null
+++ b/drivers/gpio/hsdk-creg-gpio.c
@@ -0,0 +1,110 @@
+/*
+ * Synopsys HSDK SDP Generic PLL clock driver
+ *
+ * Copyright (C) 2017 Synopsys
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm-generic/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <linux/printk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define HSDK_CREG_MAX_GPIO 8
+
+#define GPIO_ACTIVATE 0x2
+#define GPIO_DEACTIVATE 0x3
+#define GPIO_PIN_MASK 0x3
+#define BIT_PER_GPIO 2
+
+struct hsdk_creg_gpio {
+ uint32_t *regs;
+};
+
+static int hsdk_creg_gpio_set_value(struct udevice *dev, unsigned oft, int val)
+{
+ struct hsdk_creg_gpio *hcg = dev_get_priv(dev);
+ uint32_t reg = readl(hcg->regs);
+ uint32_t cmd = val ? GPIO_DEACTIVATE : GPIO_ACTIVATE;
+
+ reg &= ~(GPIO_PIN_MASK << (oft * BIT_PER_GPIO));
+ reg |= (cmd << (oft * BIT_PER_GPIO));
+
+ writel(reg, hcg->regs);
+
+ return 0;
+}
+
+static int hsdk_creg_gpio_direction_output(struct udevice *dev, unsigned oft,
+ int val)
+{
+ hsdk_creg_gpio_set_value(dev, oft, val);
+
+ return 0;
+}
+
+static int hsdk_creg_gpio_direction_input(struct udevice *dev, unsigned oft)
+{
+ pr_err("hsdk-creg-gpio can't be used as input!\n");
+
+ return -ENOTSUPP;
+}
+
+static int hsdk_creg_gpio_get_value(struct udevice *dev, unsigned int oft)
+{
+ struct hsdk_creg_gpio *hcg = dev_get_priv(dev);
+ uint32_t val = readl(hcg->regs);
+
+ val = (val >> (oft * BIT_PER_GPIO)) & GPIO_PIN_MASK;
+ return (val == GPIO_DEACTIVATE) ? 1 : 0;
+}
+
+static const struct dm_gpio_ops hsdk_creg_gpio_ops = {
+ .direction_output = hsdk_creg_gpio_direction_output,
+ .direction_input = hsdk_creg_gpio_direction_input,
+ .set_value = hsdk_creg_gpio_set_value,
+ .get_value = hsdk_creg_gpio_get_value,
+};
+
+static int hsdk_creg_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct hsdk_creg_gpio *hcg = dev_get_priv(dev);
+
+ hcg->regs = (uint32_t *)devfdt_get_addr_ptr(dev);
+
+ uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 1);
+ if (uc_priv->gpio_count > HSDK_CREG_MAX_GPIO)
+ uc_priv->gpio_count = HSDK_CREG_MAX_GPIO;
+
+ uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
+ if (!uc_priv->bank_name)
+ uc_priv->bank_name = dev_read_name(dev);
+
+ pr_debug("%s GPIO [0x%p] controller with %d gpios probed\n",
+ uc_priv->bank_name, hcg->regs, uc_priv->gpio_count);
+
+ return 0;
+}
+
+static const struct udevice_id hsdk_creg_gpio_ids[] = {
+ { .compatible = "snps,hsdk-creg-gpio" },
+ { }
+};
+
+U_BOOT_DRIVER(gpio_hsdk_creg) = {
+ .name = "gpio_hsdk_creg",
+ .id = UCLASS_GPIO,
+ .ops = &hsdk_creg_gpio_ops,
+ .probe = hsdk_creg_gpio_probe,
+ .of_match = hsdk_creg_gpio_ids,
+ .platdata_auto_alloc_size = sizeof(struct hsdk_creg_gpio),
+};