x86: Add a x86_ prefix to the x86-specific PCI functions
These functions currently use a generic name, but they are for x86 only.
This may introduce confusion and prevents U-Boot from using these names
more widely.
In fact it should be possible to remove these at some point and use
generic functions, but for now, rename them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/cpu/baytrail/early_uart.c b/arch/x86/cpu/baytrail/early_uart.c
index 4199210..b64a3a9 100644
--- a/arch/x86/cpu/baytrail/early_uart.c
+++ b/arch/x86/cpu/baytrail/early_uart.c
@@ -50,7 +50,7 @@
writel(reg, pconf0_addr);
}
-static void pci_write_config32(int dev, unsigned int where, u32 value)
+static void x86_pci_write_config32(int dev, unsigned int where, u32 value)
{
unsigned long addr;
@@ -62,7 +62,8 @@
int setup_early_uart(void)
{
/* Enable the legacy UART hardware. */
- pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT, 1);
+ x86_pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT,
+ 1);
/*
* Set up the pads to the UART function. This allows the signals to
diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c
index 65a17d3..56b19e3 100644
--- a/arch/x86/cpu/ivybridge/bd82x6x.c
+++ b/arch/x86/cpu/ivybridge/bd82x6x.c
@@ -22,36 +22,36 @@
debug("bd82x6x PCI init.\n");
/* Enable Bus Master */
- reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
reg16 |= PCI_COMMAND_MASTER;
- pci_write_config16(dev, PCI_COMMAND, reg16);
+ x86_pci_write_config16(dev, PCI_COMMAND, reg16);
/* This device has no interrupt */
- pci_write_config8(dev, INTR, 0xff);
+ x86_pci_write_config8(dev, INTR, 0xff);
/* disable parity error response and SERR */
- reg16 = pci_read_config16(dev, BCTRL);
+ reg16 = x86_pci_read_config16(dev, BCTRL);
reg16 &= ~(1 << 0);
reg16 &= ~(1 << 1);
- pci_write_config16(dev, BCTRL, reg16);
+ x86_pci_write_config16(dev, BCTRL, reg16);
/* Master Latency Count must be set to 0x04! */
- reg8 = pci_read_config8(dev, SMLT);
+ reg8 = x86_pci_read_config8(dev, SMLT);
reg8 &= 0x07;
reg8 |= (0x04 << 3);
- pci_write_config8(dev, SMLT, reg8);
+ x86_pci_write_config8(dev, SMLT, reg8);
/* Will this improve throughput of bus masters? */
- pci_write_config8(dev, PCI_MIN_GNT, 0x06);
+ x86_pci_write_config8(dev, PCI_MIN_GNT, 0x06);
/* Clear errors in status registers */
- reg16 = pci_read_config16(dev, PSTS);
+ reg16 = x86_pci_read_config16(dev, PSTS);
/* reg16 |= 0xf900; */
- pci_write_config16(dev, PSTS, reg16);
+ x86_pci_write_config16(dev, PSTS, reg16);
- reg16 = pci_read_config16(dev, SECSTS);
+ reg16 = x86_pci_read_config16(dev, SECSTS);
/* reg16 |= 0xf900; */
- pci_write_config16(dev, SECSTS, reg16);
+ x86_pci_write_config16(dev, SECSTS, reg16);
}
#define PCI_BRIDGE_UPDATE_COMMAND
@@ -59,7 +59,7 @@
{
uint16_t command;
- command = pci_read_config16(dev, PCI_COMMAND);
+ command = x86_pci_read_config16(dev, PCI_COMMAND);
command |= PCI_COMMAND_IO;
#ifdef PCI_BRIDGE_UPDATE_COMMAND
/*
@@ -67,7 +67,7 @@
* ROM and APICs to become invisible.
*/
debug("%x cmd <- %02x\n", dev, command);
- pci_write_config16(dev, PCI_COMMAND, command);
+ x86_pci_write_config16(dev, PCI_COMMAND, command);
#else
printf("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command);
#endif
@@ -77,11 +77,11 @@
{
uint16_t ctrl;
- ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
+ ctrl = x86_pci_read_config16(dev, PCI_BRIDGE_CONTROL);
ctrl |= PCI_COMMAND_IO;
ctrl |= PCI_BRIDGE_CTL_VGA;
debug("%x bridge ctrl <- %04x\n", dev, ctrl);
- pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
+ x86_pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
bd82x6x_pci_dev_enable_resources(dev);
}
diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c
index e925310..5fd3753 100644
--- a/arch/x86/cpu/ivybridge/cpu.c
+++ b/arch/x86/cpu/ivybridge/cpu.c
@@ -167,21 +167,21 @@
dev = PCI_BDF(0x0, 0x1f, 0x3);
/* Check to make sure we've got the right device. */
- value = pci_read_config16(dev, 0x0);
+ value = x86_pci_read_config16(dev, 0x0);
if (value != 0x8086) {
printf("SMBus controller not found\n");
return -ENOSYS;
}
/* Set SMBus I/O base. */
- pci_write_config32(dev, SMB_BASE,
- SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+ x86_pci_write_config32(dev, SMB_BASE,
+ SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
/* Set SMBus enable. */
- pci_write_config8(dev, HOSTC, HST_EN);
+ x86_pci_write_config8(dev, HOSTC, HST_EN);
/* Set SMBus I/O space enable. */
- pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+ x86_pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
/* Disable interrupt generation. */
outb(0, SMBUS_IO_BASE + SMBHSTCTL);
@@ -214,25 +214,25 @@
u32 cmd;
/* USB Controller 1 */
- pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
- PCH_EHCI0_TEMP_BAR0);
- cmd = pci_read_config32(usb0, PCI_COMMAND);
+ x86_pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
+ PCH_EHCI0_TEMP_BAR0);
+ cmd = x86_pci_read_config32(usb0, PCI_COMMAND);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(usb0, PCI_COMMAND, cmd);
+ x86_pci_write_config32(usb0, PCI_COMMAND, cmd);
/* USB Controller 1 */
- pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
- PCH_EHCI1_TEMP_BAR0);
- cmd = pci_read_config32(usb1, PCI_COMMAND);
+ x86_pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
+ PCH_EHCI1_TEMP_BAR0);
+ cmd = x86_pci_read_config32(usb1, PCI_COMMAND);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(usb1, PCI_COMMAND, cmd);
+ x86_pci_write_config32(usb1, PCI_COMMAND, cmd);
/* USB3 Controller */
- pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
- PCH_XHCI_TEMP_BAR0);
- cmd = pci_read_config32(usb3, PCI_COMMAND);
+ x86_pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
+ PCH_XHCI_TEMP_BAR0);
+ cmd = x86_pci_read_config32(usb3, PCI_COMMAND);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config32(usb3, PCI_COMMAND, cmd);
+ x86_pci_write_config32(usb3, PCI_COMMAND, cmd);
}
static int report_bist_failure(void)
@@ -320,8 +320,8 @@
gd->arch.pei_boot_mode = boot_mode;
/* TODO: Move this to the board or driver */
- pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
- pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
+ x86_pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
+ x86_pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
/* Print processor name */
name = cpu_get_name(processor_name);
diff --git a/arch/x86/cpu/ivybridge/early_init.c b/arch/x86/cpu/ivybridge/early_init.c
index eb8f613..9ca008e 100644
--- a/arch/x86/cpu/ivybridge/early_init.c
+++ b/arch/x86/cpu/ivybridge/early_init.c
@@ -17,10 +17,10 @@
{
/* Setting up Southbridge. In the northbridge code. */
debug("Setting up static southbridge registers\n");
- pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+ x86_pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
- pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1);
- pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */
+ x86_pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1);
+ x86_pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */
debug("Disabling watchdog reboot\n");
setbits_le32(RCB_REG(GCS), 1 >> 5); /* No reset */
@@ -28,25 +28,27 @@
/* Set up all hardcoded northbridge BARs */
debug("Setting up static registers\n");
- pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1);
- pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
- pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1);
- pci_write_config32(pch_dev, MCHBAR + 4, (0LL + DEFAULT_MCHBAR) >> 32);
+ x86_pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1);
+ x86_pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
+ x86_pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1);
+ x86_pci_write_config32(pch_dev, MCHBAR + 4,
+ (0LL + DEFAULT_MCHBAR) >> 32);
/* 64MB - busses 0-63 */
- pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
- pci_write_config32(pch_dev, PCIEXBAR + 4,
- (0LL + DEFAULT_PCIEXBAR) >> 32);
- pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1);
- pci_write_config32(pch_dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32);
+ x86_pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
+ x86_pci_write_config32(pch_dev, PCIEXBAR + 4,
+ (0LL + DEFAULT_PCIEXBAR) >> 32);
+ x86_pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1);
+ x86_pci_write_config32(pch_dev, DMIBAR + 4,
+ (0LL + DEFAULT_DMIBAR) >> 32);
/* Set C0000-FFFFF to access RAM on both reads and writes */
- pci_write_config8(pch_dev, PAM0, 0x30);
- pci_write_config8(pch_dev, PAM1, 0x33);
- pci_write_config8(pch_dev, PAM2, 0x33);
- pci_write_config8(pch_dev, PAM3, 0x33);
- pci_write_config8(pch_dev, PAM4, 0x33);
- pci_write_config8(pch_dev, PAM5, 0x33);
- pci_write_config8(pch_dev, PAM6, 0x33);
+ x86_pci_write_config8(pch_dev, PAM0, 0x30);
+ x86_pci_write_config8(pch_dev, PAM1, 0x33);
+ x86_pci_write_config8(pch_dev, PAM2, 0x33);
+ x86_pci_write_config8(pch_dev, PAM3, 0x33);
+ x86_pci_write_config8(pch_dev, PAM4, 0x33);
+ x86_pci_write_config8(pch_dev, PAM5, 0x33);
+ x86_pci_write_config8(pch_dev, PAM6, 0x33);
}
static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
@@ -55,7 +57,7 @@
u16 reg16;
u8 reg8;
- reg16 = pci_read_config16(video_dev, PCI_DEVICE_ID);
+ reg16 = x86_pci_read_config16(video_dev, PCI_DEVICE_ID);
switch (reg16) {
case 0x0102: /* GT1 Desktop */
case 0x0106: /* GT1 Mobile */
@@ -75,7 +77,7 @@
debug("Initialising Graphics\n");
/* Setup IGD memory by setting GGC[7:3] = 1 for 32MB */
- reg16 = pci_read_config16(pch_dev, GGC);
+ reg16 = x86_pci_read_config16(pch_dev, GGC);
reg16 &= ~0x00f8;
reg16 |= 1 << 3;
/* Program GTT memory by setting GGC[9:8] = 2MB */
@@ -83,13 +85,13 @@
reg16 |= 2 << 8;
/* Enable VGA decode */
reg16 &= ~0x0002;
- pci_write_config16(pch_dev, GGC, reg16);
+ x86_pci_write_config16(pch_dev, GGC, reg16);
/* Enable 256MB aperture */
- reg8 = pci_read_config8(video_dev, MSAC);
+ reg8 = x86_pci_read_config8(video_dev, MSAC);
reg8 &= ~0x06;
reg8 |= 0x02;
- pci_write_config8(video_dev, MSAC, reg8);
+ x86_pci_write_config8(video_dev, MSAC, reg8);
/* Erratum workarounds */
reg32 = readl(MCHBAR_REG(0x5f00));
@@ -124,22 +126,22 @@
u8 reg8;
/* Device ID Override Enable should be done very early */
- capid0_a = pci_read_config32(pch_dev, 0xe4);
+ capid0_a = x86_pci_read_config32(pch_dev, 0xe4);
if (capid0_a & (1 << 10)) {
- reg8 = pci_read_config8(pch_dev, 0xf3);
+ reg8 = x86_pci_read_config8(pch_dev, 0xf3);
reg8 &= ~7; /* Clear 2:0 */
if (chipset_type == SANDYBRIDGE_MOBILE)
reg8 |= 1; /* Set bit 0 */
- pci_write_config8(pch_dev, 0xf3, reg8);
+ x86_pci_write_config8(pch_dev, 0xf3, reg8);
}
/* Setup all BARs required for early PCIe and raminit */
sandybridge_setup_bars(pch_dev, lpc_dev);
/* Device Enable */
- pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
+ x86_pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
sandybridge_setup_graphics(pch_dev, video_dev);
}
diff --git a/arch/x86/cpu/ivybridge/early_me.c b/arch/x86/cpu/ivybridge/early_me.c
index b24dea1..356bbb4 100644
--- a/arch/x86/cpu/ivybridge/early_me.c
+++ b/arch/x86/cpu/ivybridge/early_me.c
@@ -29,7 +29,7 @@
{
u32 dword;
- dword = pci_read_config32(PCH_ME_DEV, offset);
+ dword = x86_pci_read_config32(PCH_ME_DEV, offset);
memcpy(ptr, &dword, sizeof(dword));
}
@@ -37,7 +37,7 @@
{
u32 dword = 0;
memcpy(&dword, ptr, sizeof(dword));
- pci_write_config32(PCH_ME_DEV, offset, dword);
+ x86_pci_write_config32(PCH_ME_DEV, offset, dword);
}
void intel_early_me_status(void)
@@ -101,7 +101,7 @@
{
u32 etr3;
- etr3 = pci_read_config32(PCH_LPC_DEV, ETR3);
+ etr3 = x86_pci_read_config32(PCH_LPC_DEV, ETR3);
/* Clear CF9 Without Resume Well Reset Enable */
etr3 &= ~ETR3_CWORWRE;
@@ -112,7 +112,7 @@
else
etr3 &= ~ETR3_CF9GR;
- pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
+ x86_pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
}
int intel_early_me_init_done(u8 status)
@@ -127,8 +127,8 @@
};
/* MEBASE from MESEG_BASE[35:20] */
- mebase_l = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L);
- mebase_h = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H);
+ mebase_l = x86_pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L);
+ mebase_h = x86_pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H);
mebase_h &= 0xf;
did.uma_base = (mebase_l >> 20) | (mebase_h << 12);
diff --git a/arch/x86/cpu/ivybridge/gma.c b/arch/x86/cpu/ivybridge/gma.c
index 821ea25..ea169b0 100644
--- a/arch/x86/cpu/ivybridge/gma.c
+++ b/arch/x86/cpu/ivybridge/gma.c
@@ -741,9 +741,9 @@
int ret;
/* IGD needs to be Bus Master */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 = x86_pci_read_config32(dev, PCI_COMMAND);
reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
- pci_write_config32(dev, PCI_COMMAND, reg32);
+ x86_pci_write_config32(dev, PCI_COMMAND, reg32);
/* Use write-combining for the graphics memory, 256MB */
base = pci_read_bar32(hose, dev, 2);
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c
index 43fdd31..33b11a1 100644
--- a/arch/x86/cpu/ivybridge/lpc.c
+++ b/arch/x86/cpu/ivybridge/lpc.c
@@ -29,7 +29,7 @@
int i;
/* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */
- pci_write_config8(dev, ACPI_CNTL, 0x80);
+ x86_pci_write_config8(dev, ACPI_CNTL, 0x80);
writel(0, IO_APIC_INDEX);
writel(1 << 25, IO_APIC_DATA);
@@ -72,9 +72,9 @@
/* Set packet length and toggle silent mode bit for one frame. */
value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0);
#ifdef CONFIG_SERIRQ_CONTINUOUS_MODE
- pci_write_config8(dev, SERIRQ_CNTL, value);
+ x86_pci_write_config8(dev, SERIRQ_CNTL, value);
#else
- pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
+ x86_pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
#endif
}
@@ -86,15 +86,15 @@
sizeof(route)))
return -EINVAL;
ptr = route;
- pci_write_config8(dev, PIRQA_ROUT, *ptr++);
- pci_write_config8(dev, PIRQB_ROUT, *ptr++);
- pci_write_config8(dev, PIRQC_ROUT, *ptr++);
- pci_write_config8(dev, PIRQD_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQA_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQB_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQC_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQD_ROUT, *ptr++);
- pci_write_config8(dev, PIRQE_ROUT, *ptr++);
- pci_write_config8(dev, PIRQF_ROUT, *ptr++);
- pci_write_config8(dev, PIRQG_ROUT, *ptr++);
- pci_write_config8(dev, PIRQH_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQE_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQF_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQG_ROUT, *ptr++);
+ x86_pci_write_config8(dev, PIRQH_ROUT, *ptr++);
/*
* TODO(sjg@chromium.org): U-Boot does not set up the interrupts
@@ -116,7 +116,7 @@
for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++)
reg |= route[gpi] << (gpi * 2);
- pci_write_config32(dev, 0xb8, reg);
+ x86_pci_write_config32(dev, 0xb8, reg);
return 0;
}
@@ -141,7 +141,7 @@
*/
pwr_on = MAINBOARD_POWER_ON;
- reg16 = pci_read_config16(dev, GEN_PMCON_3);
+ reg16 = x86_pci_read_config16(dev, GEN_PMCON_3);
reg16 &= 0xfffe;
switch (pwr_on) {
case MAINBOARD_POWER_OFF:
@@ -168,7 +168,7 @@
reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */
- pci_write_config16(dev, GEN_PMCON_3, reg16);
+ x86_pci_write_config16(dev, GEN_PMCON_3, reg16);
debug("Set power %s after power failure.\n", state);
/* Set up NMI on errors. */
@@ -192,21 +192,21 @@
outb(reg8, 0x70);
/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
- reg16 = pci_read_config16(dev, GEN_PMCON_1);
+ reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
reg16 &= ~(3 << 0); /* SMI# rate 1 minute */
reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */
#if DEBUG_PERIODIC_SMIS
/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */
reg16 |= (3 << 0); /* Periodic SMI every 8s */
#endif
- pci_write_config16(dev, GEN_PMCON_1, reg16);
+ x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
/* Set the board's GPI routing. */
ret = pch_gpi_routing(blob, node, dev);
if (ret)
return ret;
- pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
+ pmbase = x86_pci_read_config16(dev, 0x40) & 0xfffe;
writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node,
"intel,gpe0-enable", 0));
@@ -231,11 +231,11 @@
int rtc_failed;
u8 reg8;
- reg8 = pci_read_config8(dev, GEN_PMCON_3);
+ reg8 = x86_pci_read_config8(dev, GEN_PMCON_3);
rtc_failed = reg8 & RTC_BATTERY_DEAD;
if (rtc_failed) {
reg8 &= ~RTC_BATTERY_DEAD;
- pci_write_config8(dev, GEN_PMCON_3, reg8);
+ x86_pci_write_config8(dev, GEN_PMCON_3, reg8);
}
debug("rtc_failed = 0x%x\n", rtc_failed);
@@ -258,7 +258,7 @@
static void cpt_pm_init(pci_dev_t dev)
{
debug("CougarPoint PM init\n");
- pci_write_config8(dev, 0xa9, 0x47);
+ x86_pci_write_config8(dev, 0xa9, 0x47);
setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0));
setbits_le32(RCB_REG(0x228c), 1 << 0);
@@ -302,7 +302,7 @@
static void ppt_pm_init(pci_dev_t dev)
{
debug("PantherPoint PM init\n");
- pci_write_config8(dev, 0xa9, 0x47);
+ x86_pci_write_config8(dev, 0xa9, 0x47);
setbits_le32(RCB_REG(0x2238), 1 << 0);
setbits_le32(RCB_REG(0x228c), 1 << 0);
setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14));
@@ -356,9 +356,9 @@
setbits_le32(RCB_REG(0x2234), 0xf);
- reg16 = pci_read_config16(dev, GEN_PMCON_1);
+ reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
reg16 |= (1 << 2) | (1 << 11);
- pci_write_config16(dev, GEN_PMCON_1, reg16);
+ x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
pch_iobp_update(0xEB007F07, ~0UL, (1 << 31));
pch_iobp_update(0xEB004000, ~0UL, (1 << 7));
@@ -412,15 +412,15 @@
#if TEST_SMM_FLASH_LOCKDOWN
/* Now try this: */
debug("Locking BIOS to RO... ");
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
reg8 &= ~(1 << 0); /* clear BIOSWE */
- pci_write_config8(dev, 0xdc, reg8);
+ x86_pci_write_config8(dev, 0xdc, reg8);
reg8 |= (1 << 1); /* set BLE */
- pci_write_config8(dev, 0xdc, reg8);
+ x86_pci_write_config8(dev, 0xdc, reg8);
debug("ok.\n");
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
@@ -428,9 +428,9 @@
writeb(0, 0xfff00000);
debug("Testing:\n");
reg8 |= (1 << 0); /* set BIOSWE */
- pci_write_config8(dev, 0xdc, reg8);
+ x86_pci_write_config8(dev, 0xdc, reg8);
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
debug("Done.\n");
@@ -443,9 +443,9 @@
u8 reg8;
debug("Enabling BIOS updates outside of SMM... ");
- reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
reg8 &= ~(1 << 5);
- pci_write_config8(dev, 0xdc, reg8);
+ x86_pci_write_config8(dev, 0xdc, reg8);
}
static void pch_fixups(pci_dev_t dev)
@@ -453,9 +453,9 @@
u8 gen_pmcon_2;
/* Indicate DRAM init done for MRC S3 to know it can resume */
- gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2);
+ gen_pmcon_2 = x86_pci_read_config8(dev, GEN_PMCON_2);
gen_pmcon_2 |= (1 << 7);
- pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
+ x86_pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
/* Enable DMI ASPM in the PCH */
clrbits_le32(RCB_REG(0x2304), 1 << 10);
@@ -478,10 +478,10 @@
return -EINVAL;
/* Set COM1/COM2 decode range */
- pci_write_config16(dev, LPC_IO_DEC, 0x0010);
+ x86_pci_write_config16(dev, LPC_IO_DEC, 0x0010);
/* Enable PS/2 Keyboard/Mouse, EC areas and COM1 */
- pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
+ x86_pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
GAMEL_LPC_EN | COMA_LPC_EN);
/* Write all registers but use 0 if we run out of data */
@@ -491,7 +491,7 @@
if (i < count)
reg = ptr->base | PCI_COMMAND_IO | (ptr->size << 16);
- pci_write_config32(dev, LPC_GENX_DEC(i), reg);
+ x86_pci_write_config32(dev, LPC_GENX_DEC(i), reg);
}
return 0;
@@ -514,7 +514,7 @@
return -ENOENT;
/* Set the value for PCI command register. */
- pci_write_config16(dev, PCI_COMMAND, 0x000f);
+ x86_pci_write_config16(dev, PCI_COMMAND, 0x000f);
/* IO APIC initialization. */
pch_enable_apic(dev);
diff --git a/arch/x86/cpu/ivybridge/northbridge.c b/arch/x86/cpu/ivybridge/northbridge.c
index c50b5de..e95e60e 100644
--- a/arch/x86/cpu/ivybridge/northbridge.c
+++ b/arch/x86/cpu/ivybridge/northbridge.c
@@ -30,7 +30,7 @@
result = cpuid(1);
stepping = result.eax & 0xf;
dev = PCI_BDF(0, 0, 0);
- bridge_id = pci_read_config16(dev, PCI_DEVICE_ID) & 0xf0;
+ bridge_id = x86_pci_read_config16(dev, PCI_DEVICE_ID) & 0xf0;
bridge_revision_id = bridge_id | stepping;
}
@@ -55,7 +55,7 @@
*base = 0;
*len = 0;
- pciexbar_reg = pci_read_config32(dev, PCIEXBAR);
+ pciexbar_reg = x86_pci_read_config32(dev, PCIEXBAR);
if (!(pciexbar_reg & (1 << 0)))
return 0;
@@ -170,7 +170,7 @@
void northbridge_enable(pci_dev_t dev)
{
#if CONFIG_HAVE_ACPI_RESUME
- switch (pci_read_config32(dev, SKPAD)) {
+ switch (x86_pci_read_config32(dev, SKPAD)) {
case 0xcafebabe:
debug("Normal boot.\n");
apci_set_slp_type(0);
diff --git a/arch/x86/cpu/ivybridge/pch.c b/arch/x86/cpu/ivybridge/pch.c
index fa04d48..bbab646 100644
--- a/arch/x86/cpu/ivybridge/pch.c
+++ b/arch/x86/cpu/ivybridge/pch.c
@@ -21,7 +21,7 @@
dev = PCH_LPC_DEV;
if (pch_revision_id < 0)
- pch_revision_id = pci_read_config8(dev, PCI_REVISION_ID);
+ pch_revision_id = x86_pci_read_config8(dev, PCI_REVISION_ID);
return pch_revision_id;
}
@@ -32,7 +32,7 @@
dev = PCH_LPC_DEV;
if (pch_type < 0)
- pch_type = pci_read_config8(dev, PCI_DEVICE_ID + 1);
+ pch_type = x86_pci_read_config8(dev, PCI_DEVICE_ID + 1);
return pch_type;
}
diff --git a/arch/x86/cpu/ivybridge/pci.c b/arch/x86/cpu/ivybridge/pci.c
index 452d1c3..7f62a86 100644
--- a/arch/x86/cpu/ivybridge/pci.c
+++ b/arch/x86/cpu/ivybridge/pci.c
@@ -70,9 +70,9 @@
reg16 = 0xff;
dev = PCH_DEV;
- reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config16(dev, PCI_COMMAND, reg16);
+ x86_pci_write_config16(dev, PCI_COMMAND, reg16);
/*
* Clear non-reserved bits in status register.
diff --git a/arch/x86/cpu/ivybridge/report_platform.c b/arch/x86/cpu/ivybridge/report_platform.c
index 69e31b3..4493870 100644
--- a/arch/x86/cpu/ivybridge/report_platform.c
+++ b/arch/x86/cpu/ivybridge/report_platform.c
@@ -70,14 +70,14 @@
u16 dev_id;
uint8_t rev_id;
- dev_id = pci_read_config16(PCH_LPC_DEV, 2);
+ dev_id = x86_pci_read_config16(PCH_LPC_DEV, 2);
for (i = 0; i < ARRAY_SIZE(pch_table); i++) {
if (pch_table[i].dev_id == dev_id) {
pch_type = pch_table[i].dev_name;
break;
}
}
- rev_id = pci_read_config8(PCH_LPC_DEV, 8);
+ rev_id = x86_pci_read_config8(PCH_LPC_DEV, 8);
debug("PCH type: %s, device id: %x, rev id %x\n", pch_type, dev_id,
rev_id);
}
diff --git a/arch/x86/cpu/ivybridge/sata.c b/arch/x86/cpu/ivybridge/sata.c
index bbcd47d..e7bf03c 100644
--- a/arch/x86/cpu/ivybridge/sata.c
+++ b/arch/x86/cpu/ivybridge/sata.c
@@ -14,14 +14,14 @@
static inline u32 sir_read(pci_dev_t dev, int idx)
{
- pci_write_config32(dev, SATA_SIRI, idx);
- return pci_read_config32(dev, SATA_SIRD);
+ x86_pci_write_config32(dev, SATA_SIRI, idx);
+ return x86_pci_read_config32(dev, SATA_SIRD);
}
static inline void sir_write(pci_dev_t dev, int idx, u32 value)
{
- pci_write_config32(dev, SATA_SIRI, idx);
- pci_write_config32(dev, SATA_SIRD, value);
+ x86_pci_write_config32(dev, SATA_SIRI, idx);
+ x86_pci_write_config32(dev, SATA_SIRD, value);
}
static void common_sata_init(pci_dev_t dev, unsigned int port_map)
@@ -31,17 +31,17 @@
/* Set IDE I/O Configuration */
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
- pci_write_config32(dev, IDE_CONFIG, reg32);
+ x86_pci_write_config32(dev, IDE_CONFIG, reg32);
/* Port enable */
- reg16 = pci_read_config16(dev, 0x92);
+ reg16 = x86_pci_read_config16(dev, 0x92);
reg16 &= ~0x3f;
reg16 |= port_map;
- pci_write_config16(dev, 0x92, reg16);
+ x86_pci_write_config16(dev, 0x92, reg16);
/* SATA Initialization register */
port_map &= 0xff;
- pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
+ x86_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
}
void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
@@ -60,7 +60,7 @@
"sata_interface_speed_support", 0);
/* Enable BARs */
- pci_write_config16(dev, PCI_COMMAND, 0x0007);
+ x86_pci_write_config16(dev, PCI_COMMAND, 0x0007);
mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
if (!mode || !strcmp(mode, "ahci")) {
@@ -69,18 +69,18 @@
debug("SATA: Controller in AHCI mode\n");
/* Set Interrupt Line, Interrupt Pin is set by D31IP.PIP */
- pci_write_config8(dev, INTR_LN, 0x0a);
+ x86_pci_write_config8(dev, INTR_LN, 0x0a);
/* Set timings */
- pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
- pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
/* Sync DMA */
- pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
- pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
+ x86_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
+ x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
common_sata_init(dev, 0x8000 | port_map);
@@ -115,22 +115,22 @@
/* No AHCI: clear AHCI base */
pci_write_bar32(hose, dev, 5, 0x00000000);
/* And without AHCI BAR no memory decoding */
- reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
reg16 &= ~PCI_COMMAND_MEMORY;
- pci_write_config16(dev, PCI_COMMAND, reg16);
+ x86_pci_write_config16(dev, PCI_COMMAND, reg16);
- pci_write_config8(dev, 0x09, 0x80);
+ x86_pci_write_config8(dev, 0x09, 0x80);
/* Set timings */
- pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
- pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
- pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
- pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
+ x86_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
+ x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
common_sata_init(dev, port_map);
} else {
@@ -140,31 +140,32 @@
pci_write_bar32(hose, dev, 5, 0x00000000);
/* And without AHCI BAR no memory decoding */
- reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
reg16 &= ~PCI_COMMAND_MEMORY;
- pci_write_config16(dev, PCI_COMMAND, reg16);
+ x86_pci_write_config16(dev, PCI_COMMAND, reg16);
/*
* Native mode capable on both primary and secondary (0xa)
* OR'ed with enabled (0x50) = 0xf
*/
- pci_write_config8(dev, 0x09, 0x8f);
+ x86_pci_write_config8(dev, 0x09, 0x8f);
/* Set Interrupt Line */
/* Interrupt Pin is set by D31IP.PIP */
- pci_write_config8(dev, INTR_LN, 0xff);
+ x86_pci_write_config8(dev, INTR_LN, 0xff);
/* Set timings */
- pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
- pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_SITRE | IDE_ISP_3_CLOCKS |
IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
- pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
- pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
+ x86_pci_write_config16(dev, IDE_SDMA_CNT,
+ IDE_SSDE0 | IDE_PSDE0);
+ x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
common_sata_init(dev, port_map);
}
@@ -221,5 +222,5 @@
port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
map |= (port_map ^ 0x3f) << 8;
- pci_write_config16(dev, 0x90, map);
+ x86_pci_write_config16(dev, 0x90, map);
}
diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c
index 766b385..672d069 100644
--- a/arch/x86/cpu/ivybridge/sdram.c
+++ b/arch/x86/cpu/ivybridge/sdram.c
@@ -444,7 +444,7 @@
* Send ME init done for SandyBridge here. This is done inside the
* SystemAgent binary on IvyBridge
*/
- done = pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
+ done = x86_pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
done &= BASE_REV_MASK;
if (BASE_REV_SNB == done)
intel_early_me_init_done(ME_INIT_STATUS_SUCCESS);
@@ -615,24 +615,24 @@
*/
/* Top of Upper Usable DRAM, including remap */
- touud = pci_read_config32(dev, TOUUD+4);
+ touud = x86_pci_read_config32(dev, TOUUD+4);
touud <<= 32;
- touud |= pci_read_config32(dev, TOUUD);
+ touud |= x86_pci_read_config32(dev, TOUUD);
/* Top of Lower Usable DRAM */
- tolud = pci_read_config32(dev, TOLUD);
+ tolud = x86_pci_read_config32(dev, TOLUD);
/* Top of Memory - does not account for any UMA */
- tom = pci_read_config32(dev, 0xa4);
+ tom = x86_pci_read_config32(dev, 0xa4);
tom <<= 32;
- tom |= pci_read_config32(dev, 0xa0);
+ tom |= x86_pci_read_config32(dev, 0xa0);
debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
/* ME UMA needs excluding if total memory <4GB */
- me_base = pci_read_config32(dev, 0x74);
+ me_base = x86_pci_read_config32(dev, 0x74);
me_base <<= 32;
- me_base |= pci_read_config32(dev, 0x70);
+ me_base |= x86_pci_read_config32(dev, 0x70);
debug("MEBASE %llx\n", me_base);
@@ -650,7 +650,7 @@
}
/* Graphics memory comes next */
- ggc = pci_read_config16(dev, GGC);
+ ggc = x86_pci_read_config16(dev, GGC);
if (!(ggc & 2)) {
debug("IGD decoded, subtracting ");
@@ -670,7 +670,7 @@
}
/* Calculate TSEG size from its base which must be below GTT */
- tseg_base = pci_read_config32(dev, 0xb8);
+ tseg_base = x86_pci_read_config32(dev, 0xb8);
uma_size = (uma_memory_base - tseg_base) >> 10;
tomk -= uma_size;
uma_memory_base = tomk * 1024ULL;
diff --git a/arch/x86/cpu/ivybridge/usb_ehci.c b/arch/x86/cpu/ivybridge/usb_ehci.c
index 291c971..da11aee 100644
--- a/arch/x86/cpu/ivybridge/usb_ehci.c
+++ b/arch/x86/cpu/ivybridge/usb_ehci.c
@@ -20,10 +20,10 @@
writel(reg32, RCB_REG(0x35b0));
debug("EHCI: Setting up controller.. ");
- reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 = x86_pci_read_config32(dev, PCI_COMMAND);
reg32 |= PCI_COMMAND_MASTER;
/* reg32 |= PCI_COMMAND_SERR; */
- pci_write_config32(dev, PCI_COMMAND, reg32);
+ x86_pci_write_config32(dev, PCI_COMMAND, reg32);
debug("done.\n");
}
diff --git a/arch/x86/cpu/ivybridge/usb_xhci.c b/arch/x86/cpu/ivybridge/usb_xhci.c
index 4a32a7e..f77b804 100644
--- a/arch/x86/cpu/ivybridge/usb_xhci.c
+++ b/arch/x86/cpu/ivybridge/usb_xhci.c
@@ -16,17 +16,17 @@
debug("XHCI: Setting up controller.. ");
/* lock overcurrent map */
- reg32 = pci_read_config32(dev, 0x44);
+ reg32 = x86_pci_read_config32(dev, 0x44);
reg32 |= 1;
- pci_write_config32(dev, 0x44, reg32);
+ x86_pci_write_config32(dev, 0x44, reg32);
/* Enable clock gating */
- reg32 = pci_read_config32(dev, 0x40);
+ reg32 = x86_pci_read_config32(dev, 0x40);
reg32 &= ~((1 << 20) | (1 << 21));
reg32 |= (1 << 19) | (1 << 18) | (1 << 17);
reg32 |= (1 << 10) | (1 << 9) | (1 << 8);
reg32 |= (1 << 31); /* lock */
- pci_write_config32(dev, 0x40, reg32);
+ x86_pci_write_config32(dev, 0x40, reg32);
debug("done.\n");
}
diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c
index ab1aaaa..c6c5267 100644
--- a/arch/x86/cpu/pci.c
+++ b/arch/x86/cpu/pci.c
@@ -70,7 +70,7 @@
return pci_bus_to_hose(0);
}
-unsigned int pci_read_config8(pci_dev_t dev, unsigned where)
+unsigned int x86_pci_read_config8(pci_dev_t dev, unsigned where)
{
uint8_t value;
@@ -79,7 +79,7 @@
return value;
}
-unsigned int pci_read_config16(pci_dev_t dev, unsigned where)
+unsigned int x86_pci_read_config16(pci_dev_t dev, unsigned where)
{
uint16_t value;
@@ -88,7 +88,7 @@
return value;
}
-unsigned int pci_read_config32(pci_dev_t dev, unsigned where)
+unsigned int x86_pci_read_config32(pci_dev_t dev, unsigned where)
{
uint32_t value;
@@ -97,17 +97,17 @@
return value;
}
-void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value)
+void x86_pci_write_config8(pci_dev_t dev, unsigned where, unsigned value)
{
pci_hose_write_config_byte(get_hose(), dev, where, value);
}
-void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value)
+void x86_pci_write_config16(pci_dev_t dev, unsigned where, unsigned value)
{
pci_hose_write_config_word(get_hose(), dev, where, value);
}
-void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value)
+void x86_pci_write_config32(pci_dev_t dev, unsigned where, unsigned value)
{
pci_hose_write_config_dword(get_hose(), dev, where, value);
}
diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index 25edcf7..e4b19c2 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -30,9 +30,9 @@
{
u32 bc;
- bc = pci_read_config32(QUARK_LEGACY_BRIDGE, 0xd8);
+ bc = x86_pci_read_config32(QUARK_LEGACY_BRIDGE, 0xd8);
bc |= 0x1; /* unprotect the flash */
- pci_write_config32(QUARK_LEGACY_BRIDGE, 0xd8, bc);
+ x86_pci_write_config32(QUARK_LEGACY_BRIDGE, 0xd8, bc);
}
static void quark_setup_bars(void)
diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
index 30ab725..b7236e7 100644
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -16,9 +16,9 @@
{
u32 bc;
- bc = pci_read_config32(PCH_LPC_DEV, 0xd8);
+ bc = x86_pci_read_config32(PCH_LPC_DEV, 0xd8);
bc |= 0x1; /* unprotect the flash */
- pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
+ x86_pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
}
int arch_cpu_init(void)
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index a153dd1..b277b3d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -48,13 +48,13 @@
* Simple PCI access routines - these work from either the early PCI hose
* or the 'real' one, created after U-Boot has memory available
*/
-unsigned int pci_read_config8(pci_dev_t dev, unsigned where);
-unsigned int pci_read_config16(pci_dev_t dev, unsigned where);
-unsigned int pci_read_config32(pci_dev_t dev, unsigned where);
+unsigned int x86_pci_read_config8(pci_dev_t dev, unsigned where);
+unsigned int x86_pci_read_config16(pci_dev_t dev, unsigned where);
+unsigned int x86_pci_read_config32(pci_dev_t dev, unsigned where);
-void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value);
-void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value);
-void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value);
+void x86_pci_write_config8(pci_dev_t dev, unsigned where, unsigned value);
+void x86_pci_write_config16(pci_dev_t dev, unsigned where, unsigned value);
+void x86_pci_write_config32(pci_dev_t dev, unsigned where, unsigned value);
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/lib/bios_interrupts.c b/arch/x86/lib/bios_interrupts.c
index b0e2ecb..290990a 100644
--- a/arch/x86/lib/bios_interrupts.c
+++ b/arch/x86/lib/bios_interrupts.c
@@ -172,28 +172,28 @@
}
switch (func) {
case 0xb108: /* Read Config Byte */
- byte = pci_read_config8(dev, reg);
+ byte = x86_pci_read_config8(dev, reg);
M.x86.R_ECX = byte;
break;
case 0xb109: /* Read Config Word */
- word = pci_read_config16(dev, reg);
+ word = x86_pci_read_config16(dev, reg);
M.x86.R_ECX = word;
break;
case 0xb10a: /* Read Config Dword */
- dword = pci_read_config32(dev, reg);
+ dword = x86_pci_read_config32(dev, reg);
M.x86.R_ECX = dword;
break;
case 0xb10b: /* Write Config Byte */
byte = M.x86.R_ECX;
- pci_write_config8(dev, reg, byte);
+ x86_pci_write_config8(dev, reg, byte);
break;
case 0xb10c: /* Write Config Word */
word = M.x86.R_ECX;
- pci_write_config16(dev, reg, word);
+ x86_pci_write_config16(dev, reg, word);
break;
case 0xb10d: /* Write Config Dword */
dword = M.x86.R_ECX;
- pci_write_config32(dev, reg, dword);
+ x86_pci_write_config32(dev, reg, dword);
break;
}