blackfin: bf60x: add board and headers files to support bf609
Board and config header files for bf609-ezkit support.
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c
new file mode 100644
index 0000000..0388226
--- /dev/null
+++ b/board/bf609-ezkit/bf609-ezkit.c
@@ -0,0 +1,67 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2008-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/blackfin.h>
+#include <asm/io.h>
+#include <asm/portmux.h>
+#include "soft_switch.h"
+
+int checkboard(void)
+{
+ printf("Board: ADI BF609 EZ-Kit board\n");
+ printf(" Support: http://blackfin.uclinux.org/\n");
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ static const unsigned short pins[] = {
+ P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+ P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
+ P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
+ };
+ peripheral_request_list(pins, "smc0");
+
+ return 0;
+}
+
+#ifdef CONFIG_DESIGNWARE_ETH
+int board_eth_init(bd_t *bis)
+{
+ int ret = 0;
+
+ if (CONFIG_DW_PORTS & 1) {
+ static const unsigned short pins[] = P_RMII0;
+ if (!peripheral_request_list(pins, "emac0"))
+ ret += designware_initialize(0, EMAC0_MACCFG, 1, 0);
+ }
+ if (CONFIG_DW_PORTS & 2) {
+ static const unsigned short pins[] = P_RMII1;
+ if (!peripheral_request_list(pins, "emac1"))
+ ret += designware_initialize(1, EMAC1_MACCFG, 1, 0);
+ }
+
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_BFIN_SDH
+int board_mmc_init(bd_t *bis)
+{
+ return bfin_mmc_init(bis);
+}
+#endif
+
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+ printf("other init\n");
+ return setup_board_switches();
+}