mx5/6 clocks: Fix SDHC clocks
The i.MX5 eSDHC clocks were considered as coming from the IPG clock although
they have dedicated clock paths.
Also, on i.MX5/6, each SDHC instance has a dedicated clock, so gd->sdhc_clk must
be set accordingly. This is good for the case only a single SDHC instance is
used (initialization made with fsl_esdhc_mmc_init()). A future patch will fix
the multi-instance use case (initialization made directly with
fsl_esdhc_initialize()).
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Eric Bénard <eric@eukrea.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 46983ff..2709860 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -394,6 +394,44 @@
return ret_val;
}
+/*
+ * get esdhc clock rate.
+ */
+static u32 get_esdhc_clk(u32 port)
+{
+ u32 clk_sel = 0, pred = 0, podf = 0, freq = 0;
+ u32 cscmr1 = readl(&mxc_ccm->cscmr1);
+ u32 cscdr1 = readl(&mxc_ccm->cscdr1);
+
+ switch (port) {
+ case 0:
+ clk_sel = MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_RD(cscmr1);
+ pred = MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_RD(cscdr1);
+ podf = MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_RD(cscdr1);
+ break;
+ case 1:
+ clk_sel = MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_RD(cscmr1);
+ pred = MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_RD(cscdr1);
+ podf = MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_RD(cscdr1);
+ break;
+ case 2:
+ if (cscmr1 & MXC_CCM_CSCMR1_ESDHC3_CLK_SEL)
+ return get_esdhc_clk(1);
+ else
+ return get_esdhc_clk(0);
+ case 3:
+ if (cscmr1 & MXC_CCM_CSCMR1_ESDHC4_CLK_SEL)
+ return get_esdhc_clk(1);
+ else
+ return get_esdhc_clk(0);
+ default:
+ break;
+ }
+
+ freq = get_standard_pll_sel_clk(clk_sel) / ((pred + 1) * (podf + 1));
+ return freq;
+}
+
static u32 get_axi_a_clk(void)
{
u32 cbcdr = readl(&mxc_ccm->cbcdr);
@@ -477,6 +515,14 @@
return get_uart_clk();
case MXC_CSPI_CLK:
return imx_get_cspiclk();
+ case MXC_ESDHC_CLK:
+ return get_esdhc_clk(0);
+ case MXC_ESDHC2_CLK:
+ return get_esdhc_clk(1);
+ case MXC_ESDHC3_CLK:
+ return get_esdhc_clk(2);
+ case MXC_ESDHC4_CLK:
+ return get_esdhc_clk(3);
case MXC_FEC_CLK:
return get_ipg_clk();
case MXC_SATA_CLK:
diff --git a/arch/arm/imx-common/speed.c b/arch/arm/imx-common/speed.c
index 80989c4..fbf4de3 100644
--- a/arch/arm/imx-common/speed.c
+++ b/arch/arm/imx-common/speed.c
@@ -36,9 +36,25 @@
{
#ifdef CONFIG_FSL_ESDHC
#ifdef CONFIG_FSL_USDHC
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC3_BASE_ADDR
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC4_BASE_ADDR
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
#else
- gd->sdhc_clk = mxc_get_clock(MXC_IPG_PERCLK);
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#endif
+#else
+#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC4_BASE_ADDR
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+#else
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#endif
#endif
#endif
return 0;
diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h
index 83fb877..9cdfb48 100644
--- a/arch/arm/include/asm/arch-mx5/clock.h
+++ b/arch/arm/include/asm/arch-mx5/clock.h
@@ -45,6 +45,10 @@
MXC_IPG_PERCLK,
MXC_UART_CLK,
MXC_CSPI_CLK,
+ MXC_ESDHC_CLK,
+ MXC_ESDHC2_CLK,
+ MXC_ESDHC3_CLK,
+ MXC_ESDHC4_CLK,
MXC_FEC_CLK,
MXC_SATA_CLK,
MXC_DDR_CLK,