Patch by Yuli Barcohen, 7 Aug 2003:
According to the MPC8260 User's Manual, PCI_MODE signal should be
reflected in SCCR register, and local bus pins configuration is taken
from HRCW and appears in SIUMCR. For some reason it does not work
this way, so the only possibility to detect if the board is
configured in PCI mode is to check the BCSR. This patch sets SCCR and
SIUMCR according to the BCSR.
diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c
index 6df3d80..98ae660 100644
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -35,6 +35,7 @@
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
+#include <asm/m8260_pci.h>
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
@@ -237,6 +238,7 @@
long int initdram (int board_type)
{
+ vu_long *bcsr = (vu_long *)CFG_BCSR;
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
volatile uchar *ramaddr, c = 0xff;
@@ -252,27 +254,41 @@
immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
immap->im_siu_conf.sc_tescr1 = 0x00004000;
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+ if ((bcsr[3] & BCSR_PCI_MODE) == 0) { /* PCI mode selected by JP9 */
+ immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
+ immap->im_siu_conf.sc_siumcr =
+ (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
+ | SIUMCR_LBPC01;
+ }
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+
memctl->memc_mptpr = CFG_MPTPR;
#ifdef CFG_LSDRAM_BASE
- /* Init local bus SDRAM */
- memctl->memc_lsrt = CFG_LSRT;
+ /*
+ Initialise local bus SDRAM only if the pins
+ are configured as local bus pins and not as PCI.
+ The configuration is determined by the HRCW.
+ */
+ if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
+ memctl->memc_lsrt = CFG_LSRT;
#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */
- memctl->memc_or3 = 0xFF803280;
- memctl->memc_br3 = CFG_LSDRAM_BASE | 0x00001861;
+ memctl->memc_or3 = 0xFF803280;
+ memctl->memc_br3 = CFG_LSDRAM_BASE | 0x00001861;
#else /* CS4 */
- memctl->memc_or4 = 0xFFC01480;
- memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861;
+ memctl->memc_or4 = 0xFFC01480;
+ memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861;
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
- memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
- ramaddr = (uchar *) CFG_LSDRAM_BASE;
- *ramaddr = c;
- memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
- for (i = 0; i < 8; i++) {
+ memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
+ ramaddr = (uchar *) CFG_LSDRAM_BASE;
*ramaddr = c;
+ memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+ memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
+ *ramaddr = c;
+ memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
}
- memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
- *ramaddr = c;
- memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
#endif /* CFG_LSDRAM_BASE */
/* Init 60x bus SDRAM */