ARM: meson: clean-up platform selection
Even if multiple board are selected through Kconfig, u-boot will only
compile one. This makes sense since compiling these targets will export
global symbols, such as board_init()
The change rework amlogic Kconfig so only one board may be selected at
a time
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index cc94344..bc0f6a1 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -1,41 +1,32 @@
if ARCH_MESON
-config MESON_GXBB
- bool "Support Meson GXBaby"
+config MESON64_COMMON
+ bool
select ARM64
select CLK
select DM
select DM_SERIAL
imply CMD_DM
- help
- The Amlogic Meson GXBaby (S905) is an ARM SoC with a
- quad-core Cortex-A53 CPU and a Mali-450 GPU.
+
+config MESON_GXBB
+ bool
+ select MESON64_COMMON
config MESON_GXL
- bool "Support Meson GXL"
- select ARM64
- select CLK
- select DM
- select DM_SERIAL
- imply CMD_DM
- help
- The Amlogic Meson GXL (S905X and S905D) is an ARM SoC with a
- quad-core Cortex-A53 CPU and a Mali-450 GPU.
+ bool
+ select MESON64_COMMON
config MESON_GXM
- bool "Support Meson GXM"
- select ARM64
- select CLK
- select DM
- select DM_SERIAL
- help
- The Amlogic Meson GXM (S912) is an ARM SoC with an
- octo-core Cortex-A53 CPU and a Mali-T860 GPU.
+ bool
+ select MESON64_COMMON
-if MESON_GXBB
+choice
+ prompt "Platform select"
+ default TARGET_ODROID_C2
config TARGET_ODROID_C2
bool "ODROID-C2"
+ select MESON_GXBB
help
ODROID-C2 is a single board computer based on Meson GXBaby
with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD
@@ -43,16 +34,15 @@
config TARGET_NANOPI_K2
bool "NANOPI_K2"
+ select MESON_GXBB
help
NANOPI_K2 is a single board computer based on Meson GXBaby
with 2 GiB of RAM, Gigabit Ethernet,AP6212 Wifi, HDMI, 4 USB,
micro-SD slot, eMMC, IR receiver and a 40-pin GPIO header.
-endif
-
-if MESON_GXL
config TARGET_P212
bool "P212"
+ select MESON_GXL
help
P212 is a reference dessign board based on Meson GXL S905X SoC
with 2 GiB of RAM, Ethernet, HDMI, 2 USB, micro-SD slot,
@@ -60,6 +50,7 @@
config TARGET_LIBRETECH_CC
bool "LIBRETECH-CC"
+ select MESON_GXL
help
LibreTech CC is a single board computer based on Meson GXL
with 2 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
@@ -67,23 +58,21 @@
config TARGET_KHADAS_VIM
bool "KHADAS-VIM"
+ select MESON_GXL
help
Khadas VIM is a single board computer based on Meson GXL
with 2 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
eMMC, IR receiver and a 40-pin GPIO header.
-endif
-
-if MESON_GXM
-
config TARGET_KHADAS_VIM2
bool "KHADAS-VIM2"
+ select MESON_GXM
help
Khadas VIM2 is a single board computer based on Meson GXM
with 2/3 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
eMMC, IR receiver and a 40-pin GPIO header.
-endif
+endchoice
config SYS_SOC
default "meson"