rockchip: rk3399-puma: migrate README to doc/board in rST format
This migrates the plaintext README in
board/theobroma-systems/puma_rk3399 to doc/board/theobroma-systems and
while doing so, update the instructions and rewrite it in rST.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
diff --git a/board/theobroma-systems/puma_rk3399/MAINTAINERS b/board/theobroma-systems/puma_rk3399/MAINTAINERS
index 23701b3..7e84a5b 100644
--- a/board/theobroma-systems/puma_rk3399/MAINTAINERS
+++ b/board/theobroma-systems/puma_rk3399/MAINTAINERS
@@ -4,6 +4,7 @@
S: Maintained
F: board/theobroma-systems/puma_rk3399
F: board/theobroma-systems/common
+F: doc/board/theobroma-systems
F: include/configs/puma_rk3399.h
F: arch/arm/dts/rk3399-puma*
F: configs/puma-rk3399_defconfig
diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README
index 649aa3c..39c9d61 100644
--- a/board/theobroma-systems/puma_rk3399/README
+++ b/board/theobroma-systems/puma_rk3399/README
@@ -1,89 +1 @@
-Introduction
-============
-
-The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip
-RK3399 in a Qseven-compatible form-factor.
-
-RK3399-Q7 features:
- * CPU: ARMv8 64bit Big-Little architecture,
- * Big: dual-core Cortex-A72
- * Little: quad-core Cortex-A53
- * IRAM: 200KB
- * DRAM: 4GB-128MB dual-channel
- * eMMC: onboard eMMC
- * SD/MMC
- * GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY
- * USB:
- * USB3.0 dual role port
- * 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub
- * Display: HDMI/eDP/MIPI
- * Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF)
- * NOR Flash: onboard SPI NOR
- * Companion Controller: onboard additional Cortex-M0 microcontroller
- * RTC
- * fan controller
- * CAN
-
-Here is the step-by-step to boot to U-Boot on rk3399.
-
-Get the Source and build ATF binary
-===================================
-
- > git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
-
-Compile the ATF
-===============
-
- > cd trusted-firmware-a
- > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
- > cp build/rk3399/release/bl31/bl31.elf ../u-boot/bl31.elf
-
-Compile the U-Boot
-==================
-
- > cd ../u-boot
- > make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all
-
-Flash the image
-===============
-
-Copy u-boot-rockchip.bin to offset 32k for SD/eMMC.
-Copy u-boot-rockchip-spi.bin to offset 0 for NOR-flash.
-
-SD-Card
--------
-
- > dd if=u-boot-rockchip.bin of=/dev/sdb seek=64
-
-eMMC
-----
-
-rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with
-help of the Rockchip loader binary.
-
- > git clone https://github.com/rockchip-linux/rkdeveloptool
- > cd rkdeveloptool
- > autoreconf -i && ./configure && make
- > git clone https://github.com/rockchip-linux/rkbin.git
- > cd rkbin
- > ./tools/boot_merger RKBOOT/RK3399MINIALL.ini
- > cd ..
- > ./rkdeveloptool db rkbin/rk3399_loader_v1.25.126.bin
- > ./rkdeveloptool wl 64 ../u-boot-rockchip.bin
-
-NOR-Flash
----------
-
-rkdeveloptool allows to flash the on-board SPI via the USB OTG interface with
-help of the Rockchip loader binary.
-
- > git clone https://github.com/rockchip-linux/rkdeveloptool
- > cd rkdeveloptool
- > autoreconf -i && ./configure && make
- > git clone https://github.com/rockchip-linux/rkbin.git
- > cd rkbin
- > ./tools/boot_merger RKBOOT/RK3399MINIALL_SPINOR.ini
- > cd ..
- > ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.25.114.bin
- > ./rkdeveloptool ef
- > ./rkdeveloptool wl 0 ../u-boot-rockchip-spi.bin
+See doc/board/theobroma-systems/puma_rk3399.rst.
diff --git a/doc/board/theobroma-systems/index.rst b/doc/board/theobroma-systems/index.rst
index 945f7a2..0720128 100644
--- a/doc/board/theobroma-systems/index.rst
+++ b/doc/board/theobroma-systems/index.rst
@@ -7,3 +7,4 @@
:maxdepth: 2
jaguar_rk3588
+ puma_rk3399
diff --git a/doc/board/theobroma-systems/puma_rk3399.rst b/doc/board/theobroma-systems/puma_rk3399.rst
new file mode 100644
index 0000000..5bc6385
--- /dev/null
+++ b/doc/board/theobroma-systems/puma_rk3399.rst
@@ -0,0 +1,126 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+RK3399-Q7 Puma
+==============
+
+The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip
+RK3399 in a Qseven-compatible form-factor.
+
+RK3399-Q7 features:
+
+ * CPU: ARMv8 64bit Big-Little architecture,
+
+ * Big: dual-core Cortex-A72
+ * Little: quad-core Cortex-A53
+ * IRAM: 200KB
+ * DRAM: 4GB-128MB dual-channel
+
+ * eMMC: onboard eMMC
+ * SD/MMC
+ * GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY
+ * USB:
+
+ * USB3.0 dual role port
+ * 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub
+
+ * Display: HDMI/eDP/MIPI
+ * Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF)
+ * NOR Flash: onboard SPI NOR
+ * Companion Controller: onboard additional Cortex-M0 microcontroller
+ * RTC
+ * fan controller
+ * CAN
+
+Here is the step-by-step to boot to U-Boot on RK3399-Q7 from Theobroma Systems.
+
+Get the Source and build ATF binary
+-----------------------------------
+
+.. prompt:: bash
+
+ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+ cd trusted-firmware-a
+ make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
+ export BL31=$PWD/build/rk3399/release/bl31/bl31.elf
+
+Compile the U-Boot
+------------------
+
+.. prompt:: bash
+
+ cd ../u-boot
+ make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all
+
+This will build ``u-boot-rockchip.bin`` which can be written to an MMC device
+(eMMC or SD card), and ``u-boot-rockchip-spi.bin`` which can be written to the
+SPI-NOR flash.
+
+Flash the image
+---------------
+
+Copy ``u-boot-rockchip.bin`` to offset 32k for SD/eMMC.
+Copy ``u-boot-rockchip-spi.bin`` to offset 0 for NOR-flash.
+
+SD-Card
+~~~~~~~
+
+.. prompt:: bash
+
+ dd if=u-boot-rockchip.bin of=/dev/sdX seek=64
+
+.. note::
+
+ Replace ``/dev/sdX`` to match your SD card kernel device.
+
+eMMC
+~~~~
+
+``rkdeveloptool`` allows to flash the on-board eMMC via the USB OTG interface
+with help of the Rockchip loader binary.
+
+To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a
+micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into
+``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch
+back to ``Normal Boot`` mode. A new USB device should have appeared on your PC
+(check with ``lsusb -d 2207:330c``).
+
+To flash U-Boot on the eMMC with ``rkdeveloptool``:
+
+.. prompt:: bash
+
+ git clone https://github.com/rockchip-linux/rkdeveloptool
+ cd rkdeveloptool
+ autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make
+ git clone https://github.com/rockchip-linux/rkbin.git
+ cd rkbin
+ ./tools/boot_merger RKBOOT/RK3399MINIALL.ini
+ cd ..
+ ./rkdeveloptool db rkbin/rk3399_loader_v1.30.130.bin
+ ./rkdeveloptool wl 64 ../u-boot-rockchip.bin
+
+NOR-Flash
+~~~~~~~~~
+
+``rkdeveloptool`` allows to flash the on-board SPI via the USB OTG interface with
+help of the Rockchip loader binary.
+
+To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a
+micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into
+``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch
+back to ``Normal Boot`` mode. A new USB device should have appeared on your PC
+(check with ``lsusb -d 2207:330c``).
+
+To flash U-Boot on the SPI with ``rkdeveloptool``:
+
+.. prompt:: bash
+
+ git clone https://github.com/rockchip-linux/rkdeveloptool
+ cd rkdeveloptool
+ autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make
+ git clone https://github.com/rockchip-linux/rkbin.git
+ cd rkbin
+ ./tools/boot_merger RKBOOT/RK3399MINIALL_SPINOR.ini
+ cd ..
+ ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.30.114.bin
+ ./rkdeveloptool ef
+ ./rkdeveloptool wl 0 ../u-boot-rockchip-spi.bin