sh: Added support for SH7720 based board MPR2.
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/board/mpr2/lowlevel_init.S b/board/mpr2/lowlevel_init.S
new file mode 100644
index 0000000..060957a
--- /dev/null
+++ b/board/mpr2/lowlevel_init.S
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2008
+ * Mark Jonas <mark.jonas@de.bosch.com>
+ *
+ * (C) Copyright 2007
+ * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * board/mpr2/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+
+/*
+ * Set frequency multipliers and dividers in FRQCR.
+ */
+ mov.l WTCSR_A,r1
+ mov.l WTCSR_D,r0
+ mov.w r0,@r1
+
+ mov.l WTCNT_A,r1
+ mov.l WTCNT_D,r0
+ mov.w r0,@r1
+
+ mov.l FRQCR_A,r1
+ mov.l FRQCR_D,r0
+ mov.w r0,@r1
+
+/*
+ * Setup CS0 (Flash).
+ */
+ mov.l CS0BCR_A, r1
+ mov.l CS0BCR_D, r0
+ mov.l r0, @r1
+
+ mov.l CS0WCR_A, r1
+ mov.l CS0WCR_D, r0
+ mov.l r0, @r1
+
+/*
+ * Setup CS3 (SDRAM).
+ */
+ mov.l CS3BCR_A, r1
+ mov.l CS3BCR_D, r0
+ mov.l r0, @r1
+
+ mov.l CS3WCR_A, r1
+ mov.l CS3WCR_D, r0
+ mov.l r0, @r1
+
+ mov.l SDCR_A, r1
+ mov.l SDCR_D1, r0
+ mov.l r0, @r1
+
+ mov.l RTCSR_A, r1
+ mov.l RTCSR_D, r0
+ mov.l r0, @r1
+
+ mov.l RTCNT_A, r1
+ mov.l RTCNT_D, r0
+ mov.l r0, @r1
+
+ mov.l RTCOR_A, r1
+ mov.l RTCOR_D, r0
+ mov.l r0, @r1
+
+ mov.l SDCR_A, r1
+ mov.l SDCR_D2, r0
+ mov.l r0, @r1
+
+ mov.l SDMR3_A, r1
+ mov.l SDMR3_D, r0
+ add r0, r1
+ mov #0, r0
+ mov.w r0, @r1
+
+ rts
+ nop
+
+ .align 4
+
+/*
+ * Configuration for MPR2 A.3 through A.7
+ */
+
+/*
+ * PLL Settings
+ */
+FRQCR_D: .long 0x1103 /* I:B:P=8:4:2 */
+WTCNT_D: .long 0x5A00 /* start counting at zero */
+WTCSR_D: .long 0xA507 /* divide by 4096 */
+
+/*
+ * Spansion S29GL256N11 @ 48 MHz
+ */
+CS0BCR_D: .long 0x12490400 /* 1 idle cycle inserted, normal space, 16 bit */
+CS0WCR_D: .long 0x00000340 /* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */
+
+/*
+ * Samsung K4S511632B-UL75 @ 48 MHz
+ * Micron MT48LC32M16A2-75 @ 48 MHz
+ */
+CS3BCR_D: .long 0x10004400 /* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */
+CS3WCR_D: .long 0x00000091 /* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */
+SDCR_D1: .long 0x00000012 /* no refresh, 13 rows, 10 cols, NO bank active mode */
+SDCR_D2: .long 0x00000812 /* refresh */
+RTCSR_D: .long 0xA55A0008 /* 1/4, once */
+RTCNT_D: .long 0xA55A005D /* count 93 */
+RTCOR_D: .long 0xa55a005d /* count 93 */
+SDMR3_D: .long 0x440 /* mode register CL2, burst read and SINGLE WRITE */
+
+/*
+ * Registers
+ */
+
+FRQCR_A: .long 0xA415FF80
+WTCNT_A: .long 0xA415FF84
+WTCSR_A: .long 0xA415FF86
+
+#define BSC_BASE 0xA4FD0000
+CS0BCR_A: .long BSC_BASE + 0x04
+CS3BCR_A: .long BSC_BASE + 0x0C
+CS0WCR_A: .long BSC_BASE + 0x24
+CS3WCR_A: .long BSC_BASE + 0x2C
+SDCR_A: .long BSC_BASE + 0x44
+RTCSR_A: .long BSC_BASE + 0x48
+RTCNT_A: .long BSC_BASE + 0x4C
+RTCOR_A: .long BSC_BASE + 0x50
+SDMR3_A: .long BSC_BASE + 0x5000