rockchip: rk3288: use common TPL board file
Use Common tpl.c instead of rk3288-board-tpl.c
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 99a4265..8a7f2bb 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -88,6 +88,7 @@
imply TPL_OF_PLATDATA
imply TPL_RAM
imply TPL_REGMAP
+ imply TPL_ROCKCHIP_COMMON_BOARD
imply TPL_SERIAL_SUPPORT
imply TPL_SYSCON
imply USB_FUNCTION_ROCKUSB
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index b217421..d01293b 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -10,7 +10,6 @@
obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
obj-tpl-$(CONFIG_TPL_ROCKCHIP_COMMON_BOARD) += tpl.o
-obj-tpl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-tpl.o
obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o
obj-tpl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-tpl.o
diff --git a/arch/arm/mach-rockchip/rk3288-board-tpl.c b/arch/arm/mach-rockchip/rk3288-board-tpl.c
deleted file mode 100644
index 96de792..0000000
--- a/arch/arm/mach-rockchip/rk3288-board-tpl.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017 Amarula Solutions
- */
-
-#include <common.h>
-#include <debug_uart.h>
-#include <dm.h>
-#include <ram.h>
-#include <spl.h>
-#include <version.h>
-#include <asm/io.h>
-#include <asm/arch-rockchip/bootrom.h>
-#include <asm/arch-rockchip/clock.h>
-
-#define TIMER_LOAD_COUNT_L 0x00
-#define TIMER_LOAD_COUNT_H 0x04
-#define TIMER_CONTROL_REG 0x10
-#define TIMER_EN 0x1
-#define TIMER_FMODE BIT(0)
-#define TIMER_RMODE BIT(1)
-
-void rockchip_stimer_init(void)
-{
- asm volatile("mcr p15, 0, %0, c14, c0, 0"
- : : "r"(COUNTER_FREQUENCY));
-
- writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
- writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE);
- writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
- writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
- TIMER_CONTROL_REG);
-}
-
-void board_init_f(ulong dummy)
-{
- struct udevice *dev;
- int ret;
-
-#ifdef CONFIG_DEBUG_UART
- /*
- * Debug UART can be used from here if required:
- *
- * debug_uart_init();
- * printch('a');
- * printhex8(0x1234);
- * printascii("string");
- */
- debug_uart_init();
-#endif
- ret = spl_early_init();
- if (ret) {
- debug("spl_early_init() failed: %d\n", ret);
- hang();
- }
-
- /* Init secure timer */
- rockchip_stimer_init();
- /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
- timer_init();
-
- ret = rockchip_get_clk(&dev);
- if (ret) {
- debug("CLK init failed: %d\n", ret);
- return;
- }
-
- ret = uclass_get_device(UCLASS_RAM, 0, &dev);
- if (ret) {
- debug("DRAM init failed: %d\n", ret);
- return;
- }
-}
-
-void board_return_to_bootrom(void)
-{
- back_to_bootrom(BROM_BOOT_NEXTSTAGE);
-}
-
-u32 spl_boot_device(void)
-{
- return BOOT_DEVICE_BOOTROM;
-}
-
-void spl_board_init(void)
-{
- puts("\nU-Boot TPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \
- U_BOOT_TIME ")\n");
-}