mpc5200: suppress printf until console initialized

On boards which have the environment in eeprom, i2c_init() is called
before the console and RAM are initialized.
Suppress printfs until the console is initialized.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Heiko Schocher <hs@denx.de>
diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c
index 7d76274..e2506d8 100644
--- a/cpu/mpc5xxx/i2c.c
+++ b/cpu/mpc5xxx/i2c.c
@@ -269,7 +269,8 @@
 		if (gd->flags & GD_FLG_RELOC) {
 			fdr = divider;
 		} else {
-			printf("%ld kHz, ", best_speed / 1000);
+			if (gd->have_console)
+				printf("%ld kHz, ", best_speed / 1000);
 			return divider;
 		}
 	}
@@ -310,29 +311,34 @@
 	xaddr[3] =  addr	& 0xFF;
 
 	if (wait_for_bb()) {
-		printf("i2c_read: bus is busy\n");
+		if (gd->have_console)
+			printf("i2c_read: bus is busy\n");
 		goto Done;
 	}
 
 	mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
 	if (do_address(chip, 0)) {
-		printf("i2c_read: failed to address chip\n");
+		if (gd->have_console)
+			printf("i2c_read: failed to address chip\n");
 		goto Done;
 	}
 
 	if (send_bytes(chip, &xaddr[4-alen], alen)) {
-		printf("i2c_read: send_bytes failed\n");
+		if (gd->have_console)
+			printf("i2c_read: send_bytes failed\n");
 		goto Done;
 	}
 
 	mpc_reg_out(&regs->mcr, I2C_RSTA, I2C_RSTA);
 	if (do_address(chip, 1)) {
-		printf("i2c_read: failed to address chip\n");
+		if (gd->have_console)
+			printf("i2c_read: failed to address chip\n");
 		goto Done;
 	}
 
 	if (receive_bytes(chip, (char *)buf, len)) {
-		printf("i2c_read: receive_bytes failed\n");
+		if (gd->have_console)
+			printf("i2c_read: receive_bytes failed\n");
 		goto Done;
 	}
 
@@ -354,23 +360,27 @@
 	xaddr[3] =  addr	& 0xFF;
 
 	if (wait_for_bb()) {
-		printf("i2c_write: bus is busy\n");
+		if (gd->have_console)
+			printf("i2c_write: bus is busy\n");
 		goto Done;
 	}
 
 	mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
 	if (do_address(chip, 0)) {
-		printf("i2c_write: failed to address chip\n");
+		if (gd->have_console)
+			printf("i2c_write: failed to address chip\n");
 		goto Done;
 	}
 
 	if (send_bytes(chip, &xaddr[4-alen], alen)) {
-		printf("i2c_write: send_bytes failed\n");
+		if (gd->have_console)
+			printf("i2c_write: send_bytes failed\n");
 		goto Done;
 	}
 
 	if (send_bytes(chip, (char *)buf, len)) {
-		printf("i2c_write: send_bytes failed\n");
+		if (gd->have_console)
+			printf("i2c_write: send_bytes failed\n");
 		goto Done;
 	}