arm: histb: hi3798mv200: add initial support for Hi3798MV200 HC2910-2AGHD05 board
A board with Hi3798MV200 SoC and various peripherals. Details are in the
board README.md.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
diff --git a/board/skyworth/hc2910-2aghd05/README b/board/skyworth/hc2910-2aghd05/README
new file mode 100644
index 0000000..a838956
--- /dev/null
+++ b/board/skyworth/hc2910-2aghd05/README
@@ -0,0 +1,25 @@
+================================================================================
+ Board Information
+================================================================================
+
+The board features the Hi3798M V200 with an integrated quad-core 64-bit ARM
+Cortex A53 processor.
+SOC Hisilicon Hi3798CV200
+CPU Quad-core ARM Cortex-A53 64 bit
+DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
+USB 1x USB 2.0 ports 1x USB 3.0 ports
+CONSOLE USB-micro port for console support
+ETHERNET 1 GBe Ethernet, 1 MBe Ethernet
+WIFI 802.11n with Bluebooth
+CONNECTORS One connector for Smart Card One connector for TSI
+
+
+================================================================================
+ BUILD INSTRUCTIONS
+================================================================================
+
+The U-Boot relies on a modified l-loader and TF-A for Hi3798MV200.
+The source for l-loader can be obtained at: [l-loader](https://github.com/185264646/l-loader)
+The mainline port for TF-A is still under development. For now, you can use the TF-A for poplar directly.
+
+For more information, please refer to <board/hisilicon/poplar/README>.