Merge with /home/stefan/git/u-boot/zeus
diff --git a/MAINTAINERS b/MAINTAINERS
index 8dc46ad..eec50a8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -253,6 +253,7 @@
John Otken <jotken@softadvances.com>
luan PPC440SP
+ taihu PPC405EP
Keith Outwater <Keith_Outwater@mvis.com>
@@ -297,6 +298,7 @@
walnut PPC405GP
yellowstone PPC440GR
yosemite PPC440EP
+ zeus PPC405EP
P3M750 PPC750FX/GX/GL
diff --git a/MAKEALL b/MAKEALL
index 61a4d45..8d1830f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -89,9 +89,10 @@
OCRTC ORSG p3p440 PCI405 \
pcs440ep PIP405 PLU405 PMC405 \
PPChameleonEVB sbc405 sc3 sequoia \
- sequoia_nand taishan VOH405 VOM405 \
- W7OLMC W7OLMG walnut WUH405 \
- XPEDITE1K yellowstone yosemite yucca \
+ sequoia_nand taihu taishan VOH405 \
+ VOM405 W7OLMC W7OLMG walnut \
+ WUH405 XPEDITE1K yellowstone yosemite \
+ yucca zeus \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 8282c71..a647d54 100644
--- a/Makefile
+++ b/Makefile
@@ -1260,6 +1260,9 @@
sc3_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
+taihu_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
+
taishan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
@@ -1297,6 +1300,9 @@
yucca_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
+zeus_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
+
#########################################################################
## MPC8220 Systems
#########################################################################
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
index fe6ce8a..66e7509 100644
--- a/board/amcc/bubinga/bubinga.c
+++ b/board/amcc/bubinga/bubinga.c
@@ -20,10 +20,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-long int spd_sdram(void);
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
+
+long int spd_sdram(void);
int board_early_init_f(void)
{
@@ -34,6 +36,15 @@
mtdcr(uictr, 0x00000010); /* set int trigger levels */
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ /*
+ * Configure CPC0_PCI to enable PerWE as output
+ * and enable the internal PCI arbiter if selected
+ */
+ if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB)
+ mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+ else
+ mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN);
+
return 0;
}
diff --git a/board/amcc/taihu/Makefile b/board/amcc/taihu/Makefile
new file mode 100644
index 0000000..9731c6e
--- /dev/null
+++ b/board/amcc/taihu/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o flash.o lcd.o update.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/taihu/config.mk b/board/amcc/taihu/config.mk
new file mode 100644
index 0000000..1bdf5e4
--- /dev/null
+++ b/board/amcc/taihu/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/taihu/flash.c b/board/amcc/taihu/flash.c
new file mode 100644
index 0000000..290259e
--- /dev/null
+++ b/board/amcc/taihu/flash.c
@@ -0,0 +1,1083 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define CFG_FLASH_CHAR_SIZE unsigned char
+#define CFG_FLASH_CHAR_ADDR0 (0x0aaa)
+#define CFG_FLASH_CHAR_ADDR1 (0x0555)
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+#ifdef FLASH_BASE1_PRELIM
+static int write_word_1(flash_info_t * info, ulong dest, ulong data);
+static int write_word_2(flash_info_t * info, ulong dest, ulong data);
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
+#endif
+
+unsigned long flash_init(void)
+{
+ unsigned long size_b0, size_b1=0;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 =
+ flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ if (size_b0) {
+ /* Setup offsets */
+ flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+ /* Also protect sector containing initial power-up instruction */
+ /* (flash_protect() checks address range - other call ignored) */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+ }
+#ifdef FLASH_BASE1_PRELIM
+ size_b1 =
+ flash_get_size((vu_long *) FLASH_BASE1_PRELIM, &flash_info[1])*2;
+
+ if (flash_info[1].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n",
+ size_b1, size_b1 << 20);
+ }
+
+ if (size_b1) {
+ /* Setup offsets */
+ flash_get_offsets(FLASH_BASE1_PRELIM, &flash_info[1]);
+ flash_info[1].size = size_b1;
+ }
+#endif
+ return (size_b0 + size_b1);
+}
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000*2);
+ }
+ } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N ) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000*2);
+ }
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
+
+
+void flash_print_info(flash_info_t * info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf("AMD ");
+ break;
+ case FLASH_MAN_STM:
+ printf("STM ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf("FUJITSU ");
+ break;
+ case FLASH_MAN_SST:
+ printf("SST ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ printf("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_AM400B:
+ printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T:
+ printf("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B:
+ printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T:
+ printf("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AMD016:
+ printf("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_AM160B:
+ printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T:
+ printf("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B:
+ printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM033C:
+ printf("AM29LV033C (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AMLV128U:
+ printf("AM29LV128U (128 Mbit * 2, top boot sector)\n");
+ break;
+ case FLASH_SST800A:
+ printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A:
+ printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_STMW320DT:
+ printf ("M29W320DT (32 M, top sector)\n");
+ break;
+ case FLASH_S29GL128N:
+ printf ("S29GL128N (256 Mbit, uniform sector size)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count - 1))
+ size = info->start[i + 1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xffffffff) {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ", info->protect[i] ? "RO " : " ");
+ }
+ printf("\n");
+ return;
+}
+
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+#ifdef FLASH_BASE1_PRELIM
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+ if ((ulong)addr == FLASH_BASE1_PRELIM) {
+ return flash_get_size_2(addr, info);
+ } else {
+ return flash_get_size_1(addr, info);
+ }
+}
+
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
+#else
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+#endif
+{
+ short i;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return 0; /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+ info->flash_id += FLASH_AMD016;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+ info->flash_id += FLASH_AMDLV033C;
+ info->sector_count = 64;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return 0; /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ }
+ else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000 * 2);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ /* For AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if (i == 32) {
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return info->size;
+}
+
+static int wait_for_DQ7_1(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+#ifdef FLASH_BASE1_PRELIM
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
+ return flash_erase_2(info, s_first, s_last);
+ } else {
+ return flash_erase_1(info, s_first, s_last);
+ }
+}
+
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
+#else
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+#endif
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ for (i = 0; i < 50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7_1(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return rc;
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return rc;
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return 0;
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifdef FLASH_BASE1_PRELIM
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+ if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
+ return write_word_2(info, dest, data);
+ } else {
+ return write_word_1(info, dest, data);
+ }
+}
+
+static int write_word_1(flash_info_t * info, ulong dest, ulong data)
+#else
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+#endif
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return 2;
+ }
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+#ifdef FLASH_BASE1_PRELIM
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
+{
+ short i;
+ CFG_FLASH_CHAR_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ udelay(1000);
+
+ value = (CFG_FLASH_CHAR_SIZE)addr2[0];
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_CHAR_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_CHAR_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (CFG_FLASH_CHAR_SIZE) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (CFG_FLASH_CHAR_SIZE) STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return 0; /* no or unknown flash */
+ }
+
+ value = (CFG_FLASH_CHAR_SIZE)addr2[2]; /* device ID */
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_CHAR_SIZE) STM_ID_M29W040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_F016D:
+ info->flash_id += FLASH_AMD016;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV033C:
+ info->flash_id += FLASH_AMDLV033C;
+ info->sector_count = 64;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+ case (CFG_FLASH_CHAR_SIZE) AMD_ID_MIRROR:
+ if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_2
+ && (CFG_FLASH_CHAR_SIZE)addr2[0x1e] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_3) {
+ info->flash_id += FLASH_AMLV128U;
+ info->sector_count = 256;
+ info->size = 0x01000000;
+ } else if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_2
+ && (CFG_FLASH_CHAR_SIZE)addr2[0x1e] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_3 ) {
+ info->flash_id += FLASH_S29GL128N;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ }
+ else
+ info->flash_id = FLASH_UNKNOWN;
+ break; /* => 2 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return 0; /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N ) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00020000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ /* For AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if (i == 32) {
+ addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = (CFG_FLASH_CHAR_SIZE)addr2[4] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0;
+ return info->size;
+}
+
+static int wait_for_DQ7_2(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while (((CFG_FLASH_WORD_SIZE)addr[0] & (CFG_FLASH_WORD_SIZE) 0x80808080) !=
+ (CFG_FLASH_WORD_SIZE) 0x80808080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080;
+ addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x50505050; /* block erase */
+ for (i = 0; i < 50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080;
+ addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x30303030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7_2(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+static int write_word_2(flash_info_t * info, ulong dest, ulong data)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return 2;
+ }
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xA0A0A0A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+#endif /* FLASH_BASE1_PRELIM */
diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c
new file mode 100644
index 0000000..3d042df
--- /dev/null
+++ b/board/amcc/taihu/lcd.c
@@ -0,0 +1,257 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#define LCD_CMD_ADDR 0x50100002
+#define LCD_DATA_ADDR 0x50100003
+#define LCD_BLK_CTRL CPLD_REG1_ADDR
+
+static char *amcc_logo = "AMCC 405EP TAIHU EVALUATION KIT";
+static int addr_flag = 0x80;
+
+static void lcd_bl_ctrl(char val)
+{
+ out_8((u8 *) LCD_BLK_CTRL, in_8((u8 *) LCD_BLK_CTRL) | val);
+}
+
+static void lcd_putc(int val)
+{
+ int i = 100;
+ char addr;
+
+ while (i--) {
+ if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/
+ udelay(50);
+ break;
+ }
+ udelay(50);
+ }
+
+ if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) {
+ printf("LCD is busy\n");
+ return;
+ }
+
+ addr = in_8((u8 *) LCD_CMD_ADDR);
+ udelay(50);
+ if ((addr != 0) && (addr % 0x10 == 0)) {
+ addr_flag ^= 0x40;
+ out_8((u8 *) LCD_CMD_ADDR, addr_flag);
+ }
+
+ udelay(50);
+ out_8((u8 *) LCD_DATA_ADDR, val);
+ udelay(50);
+}
+
+static void lcd_puts(char *s)
+{
+ char *p = s;
+ int i = 100;
+
+ while (i--) {
+ if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/
+ udelay(50);
+ break;
+ }
+ udelay(50);
+ }
+
+ if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) {
+ printf("LCD is busy\n");
+ return;
+ }
+
+ while (*p)
+ lcd_putc(*p++);
+}
+
+static void lcd_put_logo(void)
+{
+ int i = 100;
+ char *p = amcc_logo;
+
+ while (i--) {
+ if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/
+ udelay(50);
+ break;
+ }
+ udelay(50);
+ }
+
+ if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) {
+ printf("LCD is busy\n");
+ return;
+ }
+
+ out_8((u8 *) LCD_CMD_ADDR, 0x80);
+ while (*p)
+ lcd_putc(*p++);
+}
+
+int lcd_init(void)
+{
+ puts("LCD: ");
+ out_8((u8 *) LCD_CMD_ADDR, 0x38); /* set function:8-bit,2-line,5x7 font type */
+ udelay(50);
+ out_8((u8 *) LCD_CMD_ADDR, 0x0f); /* set display on,cursor on,blink on */
+ udelay(50);
+ out_8((u8 *) LCD_CMD_ADDR, 0x01); /* display clear */
+ udelay(2000);
+ out_8((u8 *) LCD_CMD_ADDR, 0x06); /* set entry */
+ udelay(50);
+ lcd_bl_ctrl(0x02); /* set backlight on */
+ lcd_put_logo();
+ puts("ready\n");
+
+ return 0;
+}
+
+static int do_lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ out_8((u8 *) LCD_CMD_ADDR, 0x01);
+ udelay(2000);
+
+ return 0;
+}
+
+static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ if (argc < 2) {
+ printf("%s", cmdtp->usage);
+ return 1;
+ }
+ lcd_puts(argv[1]);
+
+ return 0;
+}
+
+static int do_lcd_putc (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ if (argc < 2) {
+ printf("%s", cmdtp->usage);
+ return 1;
+ }
+ lcd_putc((char)argv[1][0]);
+
+ return 0;
+}
+
+static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong count;
+ ulong dir;
+ char cur_addr;
+
+ if (argc < 3) {
+ printf("%s", cmdtp->usage);
+ return 1;
+ }
+
+ count = simple_strtoul(argv[1], NULL, 16);
+ if (count > 31) {
+ printf("unable to shift > 0x20\n");
+ count = 0;
+ }
+
+ dir = simple_strtoul(argv[2], NULL, 16);
+ cur_addr = in_8((u8 *) LCD_CMD_ADDR);
+ udelay(50);
+
+ if (dir == 0x0) {
+ if (addr_flag == 0x80) {
+ if (count >= (cur_addr & 0xf)) {
+ out_8((u8 *) LCD_CMD_ADDR, 0x80);
+ udelay(50);
+ count = 0;
+ }
+ } else {
+ if (count >= ((cur_addr & 0x0f) + 0x0f)) {
+ out_8((u8 *) LCD_CMD_ADDR, 0x80);
+ addr_flag = 0x80;
+ udelay(50);
+ count = 0x0;
+ } else if (count >= ( cur_addr & 0xf)) {
+ count -= cur_addr & 0xf ;
+ out_8((u8 *) LCD_CMD_ADDR, 0x80 | 0xf);
+ addr_flag = 0x80;
+ udelay(50);
+ }
+ }
+ } else {
+ if (addr_flag == 0x80) {
+ if (count >= (0x1f - (cur_addr & 0xf))) {
+ count = 0x0;
+ addr_flag = 0xc0;
+ out_8((u8 *) LCD_CMD_ADDR, 0xc0 | 0xf);
+ udelay(50);
+ } else if ((count + (cur_addr & 0xf ))>= 0x0f) {
+ count = count + (cur_addr & 0xf) - 0x0f;
+ addr_flag = 0xc0;
+ out_8((u8 *) LCD_CMD_ADDR, 0xc0);
+ udelay(50);
+ }
+ } else if ((count + (cur_addr & 0xf )) >= 0x0f) {
+ count = 0x0;
+ out_8((u8 *) LCD_CMD_ADDR, 0xC0 | 0x0F);
+ udelay(50);
+ }
+ }
+ while (count--) {
+ if (dir == 0)
+ out_8((u8 *) LCD_CMD_ADDR, 0x10);
+ else
+ out_8((u8 *) LCD_CMD_ADDR, 0x14);
+ udelay(50);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ lcd_cls, 1, 1, do_lcd_clear,
+ "lcd_cls - lcd clear display\n",
+ NULL
+ );
+
+U_BOOT_CMD(
+ lcd_puts, 2, 1, do_lcd_puts,
+ "lcd_puts - display string on lcd\n",
+ "<string> - <string> to be displayed\n"
+ );
+
+U_BOOT_CMD(
+ lcd_putc, 2, 1, do_lcd_putc,
+ "lcd_putc - display char on lcd\n",
+ "<char> - <char> to be displayed\n"
+ );
+
+U_BOOT_CMD(
+ lcd_cur, 3, 1, do_lcd_cur,
+ "lcd_cur - shift cursor on lcd\n",
+ "<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n"
+ " <count> - 0..31\n"
+ " <dir> - 0=backward 1=forward\n"
+ );
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
new file mode 100644
index 0000000..ea83671
--- /dev/null
+++ b/board/amcc/taihu/taihu.c
@@ -0,0 +1,240 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2005-2007
+ * Beijing UD Technology Co., Ltd., taihusupport@amcc.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spi.h>
+#include <asm/gpio.h>
+
+extern int lcd_init(void);
+
+/*
+ * board_early_init_f
+ */
+int board_early_init_f(void)
+{
+ lcd_init();
+
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000);
+ mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */
+ mtdcr(uictr, 0x00000000); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+
+ mtebc(pb3ap, CFG_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */
+ mtebc(pb3cr, CFG_EBC_PB3CR);
+
+ /*
+ * Configure CPC0_PCI to enable PerWE as output
+ * and enable the internal PCI arbiter
+ */
+ mtdcr(cpc0_pci, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ puts("Board: Taihu - AMCC PPC405EP Evaluation Board");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return 0;
+}
+
+/*************************************************************************
+ * long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+ return CFG_SDRAM_SIZE_PER_BANK * CFG_SDRAM_BANKS; /* 128Mbytes */
+}
+
+static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
+{
+ char stat;
+ int i;
+
+ stat = in_8((u8 *) CPLD_REG0_ADDR);
+ printf("SW2 status: ");
+ for (i=0; i<4; i++) /* 4-position */
+ printf("%d:%s ", i, stat & (0x08 >> i)?"on":"off");
+ printf("\n");
+ return 0;
+}
+
+U_BOOT_CMD (
+ sw2_stat, 1, 1, do_sw_stat,
+ "sw2_stat - show status of switch 2\n",
+ NULL
+ );
+
+static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
+{
+ int led_no;
+
+ if (argc != 3) {
+ printf("%s", cmd_tp->usage);
+ return -1;
+ }
+
+ led_no = simple_strtoul(argv[1], NULL, 16);
+ if (led_no != 1 && led_no != 2) {
+ printf("%s", cmd_tp->usage);
+ return -1;
+ }
+
+ if (strcmp(argv[2],"off") == 0x0) {
+ if (led_no == 1)
+ gpio_write_bit(30, 1);
+ else
+ gpio_write_bit(31, 1);
+ } else if (strcmp(argv[2],"on") == 0x0) {
+ if (led_no == 1)
+ gpio_write_bit(30, 0);
+ else
+ gpio_write_bit(31, 0);
+ } else {
+ printf("%s", cmd_tp->usage);
+ return -1;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD (
+ led_ctl, 3, 1, do_led_ctl,
+ "led_ctl - make led 1 or 2 on or off\n",
+ "<led_no> <on/off> - make led <led_no> on/off,\n"
+ "\tled_no is 1 or 2\t"
+ );
+
+#define SPI_CS_GPIO0 0
+#define SPI_SCLK_GPIO14 14
+#define SPI_DIN_GPIO15 15
+#define SPI_DOUT_GPIO16 16
+
+void spi_scl(int bit)
+{
+ gpio_write_bit(SPI_SCLK_GPIO14, bit);
+}
+
+void spi_sda(int bit)
+{
+ gpio_write_bit(SPI_DOUT_GPIO16, bit);
+}
+
+unsigned char spi_read(void)
+{
+ return (unsigned char)gpio_read_out_bit(SPI_DIN_GPIO15);
+}
+
+void taihu_spi_chipsel(int cs)
+{
+ gpio_write_bit(SPI_CS_GPIO0, cs);
+}
+
+spi_chipsel_type spi_chipsel[]= {
+ taihu_spi_chipsel
+};
+
+int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+
+#ifdef CONFIG_PCI
+static unsigned char int_lines[32] = {
+ 29, 30, 27, 28, 29, 30, 25, 27,
+ 29, 30, 27, 28, 29, 30, 27, 28,
+ 29, 30, 27, 28, 29, 30, 27, 28,
+ 29, 30, 27, 28, 29, 30, 27, 28};
+
+static void taihu_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char int_line = int_lines[PCI_DEV(dev) & 31];
+
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+}
+
+int pci_pre_init(struct pci_controller *hose)
+{
+ hose->fixup_irq = taihu_pci_fixup_irq;
+ return 1;
+}
+#endif /* CONFIG_PCI */
+
+#ifdef CFG_DRAM_TEST
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+ unsigned long msr;
+ unsigned long total_kbytes = CFG_SDRAM_SIZE_PER_BANK * CFG_SDRAM_BANKS / 1024;
+
+ msr = mfmsr();
+ mtmsr(msr & ~(MSR_EE));
+
+ for (k = 0; k < total_kbytes ;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0)
+ printf("%3d MB\r", k / 1024);
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ mtmsr(msr);
+
+ return 0;
+}
+#endif /* CFG_DRAM_TEST */
diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds
new file mode 100644
index 0000000..be03092
--- /dev/null
+++ b/board/amcc/taihu/u-boot.lds
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c
new file mode 100644
index 0000000..55ad535
--- /dev/null
+++ b/board/amcc/taihu/update.c
@@ -0,0 +1,132 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <i2c.h>
+
+#define PCI_M66EN 0x10
+
+static uchar buf_33[] =
+{
+ 0xb5, /* 0x00:hce =1, bss = 0, pae=1, ppdv= 0b10,spe = 1,ebw=0b01*/
+ 0x80, /* 0x01~0x03:ptm1ms =0x80000001 */
+ 0x00,
+ 0x00,
+ 0x00, /* 0x04~0x06:ptm1la = 0x00000000 */
+ 0x00,
+ 0x00,
+ 0x00, /* 0x07~0x09:ptm2ma = 0x00000000 */
+ 0x00,
+ 0x00,
+ 0x00, /* 0x0a~0x0c:ptm2la = 0x00000000 */
+ 0x00,
+ 0x00,
+ 0x10, /* 0x0d~0x0e:vendor id 0x1014*/
+ 0x14,
+ 0x00, /* 0x0f~0x10:device id 0x0000*/
+ 0x00,
+ 0x00, /* 0x11:revision 0x00 */
+ 0x00, /* 0x12~0x14:class 0x000000 */
+ 0x00,
+ 0x00,
+ 0x10, /* 0x15~0x16:subsystem vendor id */
+ 0xe8,
+ 0x00, /* 0x17~0x18:subsystem device id */
+ 0x00,
+ 0x61, /* 0x19: opdv=0b01,cbdv=0b10,ccdv=0b00,ptm2ms_ena=0, ptm1ms_ena=1 */
+ 0x68, /* 0x1a: rpci=1,fbmul=0b1010,epdv=0b00 */
+ 0x2d, /* 0x1b: fwdvb=0b101,fwdva=0b101 */
+ 0x82, /* 0x1c: pllr=1,sscs=0,mpdv=0b00,tun[22-23]=0b10 */
+ 0xbe, /* 0x1d: tun[24-31]=0xbe */
+ 0x00,
+ 0x00
+};
+
+static uchar buf_66[] =
+{
+ 0xb5, /* 0x00:hce =1, bss = 0, pae=1, ppdv= 0b10,spe = 1,ebw=0b01*/
+ 0x80, /* 0x01~0x03:ptm1ms =0x80000001 */
+ 0x00,
+ 0x00,
+ 0x00, /* 0x04~0x06:ptm1la = 0x00000000 */
+ 0x00,
+ 0x00,
+ 0x00, /* 0x07~0x09:ptm2ma = 0x00000000 */
+ 0x00,
+ 0x00,
+ 0x00, /* 0x0a~0x0c:ptm2la = 0x00000000 */
+ 0x00,
+ 0x00,
+ 0x10, /* 0x0d~0x0e:vendor id 0x1014*/
+ 0x14,
+ 0x00, /* 0x0f~0x10:device id 0x0000*/
+ 0x00,
+ 0x00, /* 0x11:revision 0x00 */
+ 0x00, /* 0x12~0x14:class 0x000000 */
+ 0x00,
+ 0x00,
+ 0x10, /* 0x15~0x16:subsystem vendor id */
+ 0xe8,
+ 0x00, /* 0x17~0x18:subsystem device id */
+ 0x00,
+ 0x61, /* 0x19: opdv=0b01,cbdv=0b10,ccdv=0b00,ptm2ms_ena=0, ptm1ms_ena=1 */
+ 0x68, /* 0x1a: rpci=1,fbmul=0b1010,epdv=0b00 */
+ 0x2d, /* 0x1b: fwdvb=0b101,fwdva=0b101 */
+ 0x82, /* 0x1c: pllr=1,sscs=0,mpdv=0b00,tun[22-23]=0b10 */
+ 0xbe, /* 0x1d: tun[24-31]=0xbe */
+ 0x00,
+ 0x00
+};
+
+static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[])
+{
+ ulong len = 0x20;
+ uchar chip = CFG_I2C_EEPROM_ADDR;
+ uchar *pbuf;
+ uchar base;
+ int i;
+
+ if ((*(volatile char*)CPLD_REG0_ADDR & PCI_M66EN) != PCI_M66EN) {
+ pbuf = buf_33;
+ base = 0x00;
+ } else {
+ pbuf = buf_66;
+ base = 0x40;
+ }
+
+ for (i = 0; i< len; i++, base++) {
+ if (i2c_write(chip, base, 1, &pbuf[i],1)!= 0) {
+ printf("i2c_write fail\n");
+ return 1;
+ }
+ udelay(11000);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD (
+ update_boot_eeprom, 1, 1, update_boot_eeprom,
+ "update_boot_eeprom - update boot eeprom content\n",
+ NULL
+ );
diff --git a/board/zeus/Makefile b/board/zeus/Makefile
new file mode 100644
index 0000000..f0d4e9f
--- /dev/null
+++ b/board/zeus/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o update.o
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/zeus/config.mk b/board/zeus/config.mk
new file mode 100644
index 0000000..1bdf5e4
--- /dev/null
+++ b/board/zeus/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds
new file mode 100644
index 0000000..73b83eb
--- /dev/null
+++ b/board/zeus/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/zeus/update.c b/board/zeus/update.c
new file mode 100644
index 0000000..c76519f
--- /dev/null
+++ b/board/zeus/update.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+
+#if defined(CONFIG_ZEUS)
+
+u8 buf_zeus_ce[] = {
+/*00 01 02 03 04 05 06 07 */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*08 09 0a 0b 0c 0d 0e 0f */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*10 11 12 13 14 15 16 17 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*18 19 1a 1b 1c 1d 1e 1f */
+ 0x00, 0xc0, 0x50, 0x12, 0x72, 0x3e, 0x00, 0x00 };
+
+u8 buf_zeus_pe[] = {
+
+/* CPU_CLOCK_DIV 1 = 00
+ CPU_PLB_FREQ_DIV 3 = 10
+ OPB_PLB_FREQ_DIV 2 = 01
+ EBC_PLB_FREQ_DIV 2 = 00
+ MAL_PLB_FREQ_DIV 1 = 00
+ PCI_PLB_FRQ_DIV 3 = 10
+ PLL_PLLOUTA = IS SET
+ PLL_OPERATING = IS NOT SET
+ PLL_FDB_MUL 10 = 1010
+ PLL_FWD_DIV_A 3 = 101
+ PLL_FWD_DIV_B 3 = 101
+ TUNE = 0x2be */
+/*00 01 02 03 04 05 06 07 */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*08 09 0a 0b 0c 0d 0e 0f */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*10 11 12 13 14 15 16 17 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*18 19 1a 1b 1c 1d 1e 1f */
+ 0x00, 0x60, 0x68, 0x2d, 0x42, 0xbe, 0x00, 0x00 };
+
+static int update_boot_eeprom(void)
+{
+ u32 len = 0x20;
+ u8 chip = CFG_I2C_EEPROM_ADDR;
+ u8 *pbuf;
+ u8 base;
+ int i;
+
+ if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE)) {
+ pbuf = buf_zeus_pe;
+ base = 0x40;
+ } else {
+ pbuf = buf_zeus_ce;
+ base = 0x00;
+ }
+
+ for (i = 0; i < len; i++, base++) {
+ if (i2c_write(chip, base, 1, &pbuf[i], 1) != 0) {
+ printf("i2c_write fail\n");
+ return 1;
+ }
+ udelay(11000);
+ }
+
+ return 0;
+}
+
+int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
+{
+ return update_boot_eeprom();
+}
+
+U_BOOT_CMD (
+ update_boot_eeprom, 1, 1, do_update_boot_eeprom,
+ "update_boot_eeprom - update boot eeprom content\n",
+ NULL
+);
+
+#endif
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
new file mode 100644
index 0000000..4ab853f
--- /dev/null
+++ b/board/zeus/zeus.c
@@ -0,0 +1,511 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <environment.h>
+#include <logbuff.h>
+#include <post.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define REBOOT_MAGIC 0x07081967
+#define REBOOT_NOP 0x00000000
+#define REBOOT_DO_POST 0x00000001
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern env_t *env_ptr;
+extern uchar default_environment[];
+
+ulong flash_get_size(ulong base, int banknum);
+void env_crc_update(void);
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+static u32 start_time;
+
+int board_early_init_f(void)
+{
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000);
+ mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */
+ mtdcr(uictr, 0x00000000); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+
+ /*
+ * Configure CPC0_PCI to enable PerWE as output
+ */
+ mtdcr(cpc0_pci, CPC0_PCI_SPE);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u32 pbcr;
+ int size_val = 0;
+ u32 post_magic;
+ u32 post_val;
+
+ post_magic = in_be32((void *)CFG_POST_MAGIC);
+ post_val = in_be32((void *)CFG_POST_VAL);
+ if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) {
+ /*
+ * Set special bootline bootparameter to pass this POST boot
+ * mode to Linux to reset the username/password
+ */
+ setenv("addmisc", "setenv bootargs \\${bootargs} factory_reset=yes");
+
+ /*
+ * Normally don't run POST tests, only when enabled
+ * via the sw-reset button. So disable further tests
+ * upon next bootup here.
+ */
+ out_be32((void *)CFG_POST_VAL, REBOOT_NOP);
+ } else {
+ /*
+ * Only run POST when initiated via the sw-reset button mechanism
+ */
+ post_word_store(0);
+ }
+
+ /*
+ * Get current time
+ */
+ start_time = get_timer(0);
+
+ /*
+ * FLASH stuff...
+ */
+
+ /* Re-do sizing to get full correct info */
+
+ /* adjust flash start and offset */
+ mfebc(pb0cr, pbcr);
+ switch (gd->bd->bi_flashsize) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ case 32 << 20:
+ size_val = 5;
+ break;
+ case 64 << 20:
+ size_val = 6;
+ break;
+ case 128 << 20:
+ size_val = 7;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+ mtebc(pb0cr, pbcr);
+
+ /*
+ * Re-check to get correct base address
+ */
+ flash_get_size(gd->bd->bi_flashstart, 0);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ /* Env protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ puts("Board: Zeus-");
+
+ if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE))
+ puts("PE");
+ else
+ puts("CE");
+
+ puts(" of BulletEndPoint");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ /* both LED's off */
+ gpio_write_bit(CFG_GPIO_LED_RED, 0);
+ gpio_write_bit(CFG_GPIO_LED_GREEN, 0);
+ udelay(10000);
+ /* and on again */
+ gpio_write_bit(CFG_GPIO_LED_RED, 1);
+ gpio_write_bit(CFG_GPIO_LED_GREEN, 1);
+
+ return (0);
+}
+
+static u32 detect_sdram_size(void)
+{
+ u32 val;
+ u32 size;
+
+ mfsdram(mem_mb0cf, val);
+ size = (4 << 20) << ((val & 0x000e0000) >> 17);
+
+ /*
+ * Check if 2nd bank is enabled too
+ */
+ mfsdram(mem_mb1cf, val);
+ if (val & 1)
+ size += (4 << 20) << ((val & 0x000e0000) >> 17);
+
+ return size;
+}
+
+long int initdram (int board_type)
+{
+ return detect_sdram_size();
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+ unsigned long msr;
+ unsigned long total_kbytes;
+
+ total_kbytes = detect_sdram_size();
+
+ msr = mfmsr();
+ mtmsr(msr & ~(MSR_EE));
+
+ for (k = 0; k < total_kbytes ;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ mtmsr(msr);
+
+ return 0;
+}
+#endif
+
+static int default_env_var(char *buf, char *var)
+{
+ char *ptr;
+ char *val;
+
+ /*
+ * Find env variable
+ */
+ ptr = strstr(buf + 4, var);
+ if (ptr == NULL) {
+ printf("ERROR: %s not found!\n", var);
+ return -1;
+ }
+ ptr += strlen(var) + 1;
+
+ /*
+ * Now the ethaddr needs to be updated in the "normal"
+ * environment storage -> redundant flash.
+ */
+ val = ptr;
+ setenv(var, val);
+ printf("Updated %s from eeprom to %s!\n", var, val);
+
+ return 0;
+}
+
+static int restore_default(void)
+{
+ char *buf;
+ char *buf_save;
+ u32 crc;
+
+ /*
+ * Unprotect and erase environment area
+ */
+ flash_protect(FLAG_PROTECT_CLEAR,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+
+ flash_sect_erase(CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1);
+
+ /*
+ * Now restore default environment from U-Boot image
+ * -> ipaddr, serverip...
+ */
+ memset(env_ptr, 0, sizeof(env_t));
+ memcpy(env_ptr->data, default_environment, ENV_SIZE);
+#ifdef CFG_REDUNDAND_ENVIRONMENT
+ env_ptr->flags = 0xFF;
+#endif
+ env_crc_update();
+ gd->env_valid = 1;
+
+ /*
+ * Read board specific values from I2C EEPROM
+ * and set env variables accordingly
+ * -> ethaddr, eth1addr, serial#
+ */
+ buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
+ if (eeprom_read(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
+ (u8 *)buf, FACTORY_RESET_ENV_SIZE)) {
+ puts("\nError reading EEPROM!\n");
+ } else {
+ crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4);
+ if (crc != *(u32 *)buf) {
+ printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(u32 *)buf);
+ return -1;
+ }
+
+ default_env_var(buf, "ethaddr");
+ buf += 8 + 18;
+ default_env_var(buf, "eth1addr");
+ buf += 9 + 18;
+ default_env_var(buf, "serial#");
+ }
+
+ /*
+ * Finally save updated env variables back to flash
+ */
+ saveenv();
+
+ free(buf_save);
+
+ return 0;
+}
+
+int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *buf;
+ char *buf_save;
+ char str[32];
+ u32 crc;
+ char var[32];
+
+ if (argc < 4) {
+ puts("ERROR!\n");
+ return -1;
+ }
+
+ buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
+ memset(buf, 0, FACTORY_RESET_ENV_SIZE);
+
+ strcpy(var, "ethaddr");
+ printf("Setting %s to %s\n", var, argv[1]);
+ sprintf(str, "%s=%s", var, argv[1]);
+ strcpy(buf + 4, str);
+ buf += strlen(str) + 1;
+
+ strcpy(var, "eth1addr");
+ printf("Setting %s to %s\n", var, argv[2]);
+ sprintf(str, "%s=%s", var, argv[2]);
+ strcpy(buf + 4, str);
+ buf += strlen(str) + 1;
+
+ strcpy(var, "serial#");
+ printf("Setting %s to %s\n", var, argv[3]);
+ sprintf(str, "%s=%s", var, argv[3]);
+ strcpy(buf + 4, str);
+
+ crc = crc32(0, (u8 *)(buf_save + 4), FACTORY_RESET_ENV_SIZE - 4);
+ *(u32 *)buf_save = crc;
+
+ if (eeprom_write(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
+ (u8 *)buf_save, FACTORY_RESET_ENV_SIZE)) {
+ puts("\nError writing EEPROM!\n");
+ return -1;
+ }
+
+ free(buf_save);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ setdef, 4, 1, do_set_default,
+ "setdef - write board-specific values to EEPROM (ethaddr...)\n",
+ "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
+ );
+
+static inline int sw_reset_pressed(void)
+{
+ return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_SW_RESET));
+}
+
+int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
+{
+ int delta;
+ int count = 0;
+ int post = 0;
+ int factory_reset = 0;
+
+ if (!sw_reset_pressed()) {
+ printf("SW-Reset already high (Button released)\n");
+ printf("-> No action taken!\n");
+ return 0;
+ }
+
+ printf("Waiting for SW-Reset button to be released.");
+
+ while (1) {
+ delta = get_timer(start_time);
+ if (!sw_reset_pressed())
+ break;
+
+ if ((delta > CFG_TIME_POST) && !post) {
+ printf("\nWhen released now, POST tests will be started.");
+ gpio_write_bit(CFG_GPIO_LED_GREEN, 0);
+ post = 1;
+ }
+
+ if ((delta > CFG_TIME_FACTORY_RESET) && !factory_reset) {
+ printf("\nWhen released now, factory default values"
+ " will be restored.");
+ gpio_write_bit(CFG_GPIO_LED_RED, 0);
+ factory_reset = 1;
+ }
+
+ udelay(1000);
+ if (!(count++ % 1000))
+ printf(".");
+ }
+
+
+ printf("\nSW-Reset Button released after %d milli-seconds!\n", delta);
+
+ if (delta > CFG_TIME_FACTORY_RESET) {
+ printf("Starting factory reset value restoration...\n");
+
+ /*
+ * Restore default setting
+ */
+ restore_default();
+
+ /*
+ * Reset the board for default to become valid
+ */
+ do_reset(NULL, 0, 0, NULL);
+
+ return 0;
+ }
+
+ if (delta > CFG_TIME_POST) {
+ printf("Starting POST configuration...\n");
+
+ /*
+ * Enable POST upon next bootup
+ */
+ out_be32((void *)CFG_POST_MAGIC, REBOOT_MAGIC);
+ out_be32((void *)CFG_POST_VAL, REBOOT_DO_POST);
+ post_bootmode_init();
+
+ /*
+ * Reset the logbuffer for a clean start
+ */
+ logbuff_reset();
+
+ do_reset(NULL, 0, 0, NULL);
+
+ return 0;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD (
+ chkreset, 1, 1, do_chkreset,
+ "chkreset- Check for status of SW-reset button and act accordingly\n",
+ NULL
+);
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ u32 post_magic;
+ u32 post_val;
+
+ post_magic = in_be32((void *)CFG_POST_MAGIC);
+ post_val = in_be32((void *)CFG_POST_VAL);
+
+ if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST))
+ return 1;
+ else
+ return 0;
+}
+#endif /* CONFIG_POST */
diff --git a/common/soft_spi.c b/common/soft_spi.c
index 00a57de..e425061 100644
--- a/common/soft_spi.c
+++ b/common/soft_spi.c
@@ -79,7 +79,9 @@
*/
int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
{
+#ifdef CFG_IMMR
volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#endif
uchar tmpdin = 0;
uchar tmpdout = 0;
int j;
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
index 0d0e273..50f2fdf 100644
--- a/cpu/ppc4xx/gpio.c
+++ b/cpu/ppc4xx/gpio.c
@@ -186,6 +186,7 @@
out32(GPIO0_TCR, reg);
}
+#ifdef GPIO1
if (gpio_core == GPIO1) {
/*
* Setup output value
@@ -203,6 +204,7 @@
reg = in32(GPIO1_TCR) | (0x80000000 >> (i));
out32(GPIO1_TCR, reg);
}
+#endif /* GPIO1 */
reg = in32(GPIO_OS(core_add+offs))
& ~(GPIO_MASK >> (j*2));
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index d520cd3..2724d91 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -187,14 +187,14 @@
/*
* Disable memory controller.
*/
- mtsdram0(mem_mcopt1, 0x00000000);
+ mtsdram(mem_mcopt1, 0x00000000);
/*
* Set MB0CF for bank 0.
*/
- mtsdram0(mem_mb0cf, mb0cf[i].reg);
- mtsdram0(mem_sdtr1, sdtr1);
- mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
+ mtsdram(mem_mb0cf, mb0cf[i].reg);
+ mtsdram(mem_sdtr1, sdtr1);
+ mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
udelay(200);
@@ -203,14 +203,34 @@
* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
* read/prefetch.
*/
- mtsdram0(mem_mcopt1, 0x80800000);
+ mtsdram(mem_mcopt1, 0x80800000);
udelay(10000);
if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
/*
- * OK, size detected -> all done
+ * OK, size detected. Enable second bank if
+ * defined (assumes same type as bank 0)
*/
+#ifdef CONFIG_SDRAM_BANK1
+ u32 b1cr = mb0cf[i].size | mb0cf[i].reg;
+
+ mtsdram(mem_mcopt1, 0x00000000);
+ mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
+ mtsdram(mem_mcopt1, 0x80800000);
+ udelay(10000);
+
+ /*
+ * Check if 2nd bank is really available.
+ * If the size not equal to the size of the first
+ * bank, then disable the 2nd bank completely.
+ */
+ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+ mb0cf[i].size) {
+ mtsdram(mem_mb1cf, 0);
+ mtsdram(mem_mcopt1, 0);
+ }
+#endif
return;
}
}
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
index 62b5442..4fb9b1a 100644
--- a/cpu/ppc4xx/sdram.h
+++ b/cpu/ppc4xx/sdram.h
@@ -29,8 +29,6 @@
#include <config.h>
-#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-
#define ONE_BILLION 1000000000
struct sdram_conf_s {
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 8ecaaea..9626b65 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1870,28 +1870,6 @@
mtdcr ebccfgd,r3
#endif
-#ifndef CFG_CPC0_PCI
- li r3,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA
- /*
- !-----------------------------------------------------------------------
- ! Check FPGA for PCI internal/external arbitration
- ! If board is set to internal arbitration, update cpc0_pci
- !-----------------------------------------------------------------------
- */
- addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */
- ori r5,r5,FPGA_REG1@l
- lbz r5,0x0(r5) /* read to get PCI arb selection */
- andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/
- beq ..pci_cfg_set /* if not set, then bypass reg write*/
-#endif
- ori r3,r3,CPC0_PCI_ARBIT_EN
-#else /* CFG_CPC0_PCI */
- li r3,CFG_CPC0_PCI
-#endif /* CFG_CPC0_PCI */
-..pci_cfg_set:
- mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/
-
/*
!-----------------------------------------------------------------------
! Check to see if chip is in bypass mode.
@@ -1947,11 +1925,50 @@
..no_pllset:
#endif /* CONFIG_BUBINGA */
+#ifdef CONFIG_TAIHU
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ addis r5,0,CPLD_REG0_ADDR@h
+ ori r5,r5,CPLD_REG0_ADDR@l
+ andi. r5, r5, 0x10
+ bne _pci_66mhz
+#endif /* CONFIG_TAIHU */
+
+#if defined(CONFIG_ZEUS)
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ lis r3,0x0000
+ addi r3,r3,0x3030
+ lis r4,0x8042
+ addi r4,r4,0x223e
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+ b 1f
+#endif
+
addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
ori r3,r3,PLLMR0_DEFAULT@l /* */
addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
ori r4,r4,PLLMR1_DEFAULT@l /* */
+#ifdef CONFIG_TAIHU
+ b 1f
+_pci_66mhz:
+ addis r3,0,PLLMR0_DEFAULT_PCI66@h
+ ori r3,r3,PLLMR0_DEFAULT_PCI66@l
+ addis r4,0,PLLMR1_DEFAULT_PCI66@h
+ ori r4,r4,PLLMR1_DEFAULT_PCI66@l
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+#endif /* CONFIG_TAIHU */
+
+1:
b pll_write /* Write the CPC0_PLLMR with new value */
pll_done:
diff --git a/doc/README.zeus b/doc/README.zeus
new file mode 100644
index 0000000..1848d8c
--- /dev/null
+++ b/doc/README.zeus
@@ -0,0 +1,73 @@
+
+Storage of the board specific values (ethaddr...)
+-------------------------------------------------
+
+The board specific environment variables that should be unique
+for each individual board, can be stored in the I2C EEPROM. This
+will be done from offset 0x80 with the length of 0x80 bytes. The
+following command can be used to store the values here:
+
+=> setdef de:20:6a:ed:e2:72 de:20:6a:ed:e2:73 AB0001
+
+ ethaddr eth1addr serial#
+
+Now those 3 values are stored into the I2C EEPROM. A CRC is added
+to make sure that the values get not corrupted.
+
+
+SW-Reset Pushbutton handling:
+-----------------------------
+
+The SW-reset push button is connected to a GPIO input too. This
+way U-Boot can "see" how long the SW-reset was pressed, and a
+specific action can be taken. Two different actions are supported:
+
+a) Release after more than 5 seconds and less then 10 seconds:
+ -> Run POST
+
+ Please note, that the POST test will take a while (approx. 1 min
+ on the 128MByte board). This is mainly due to the system memory
+ test.
+
+b) Release after more than 10 seconds:
+ -> Restore factory default settings
+
+ The factory default values are restored. The default environment
+ variables are restored (ipaddr, serverip...) and the board
+ specific values (ethaddr, eth1addr and serial#) are restored
+ to the environment from the I2C EEPROM. Also a bootline parameter
+ is added to the Linux bootline to signal the Linux kernel upon
+ the next startup, that the factory defaults should be restored.
+
+The command to check this sw-reset status and act accordingly is
+
+=> chkreset
+
+This command is added to the default "bootcmd", so that it is called
+automatically upon startup.
+
+Also, the 2 LED's are used to indicate the current status of this
+command (time passed since pushing the button). When the POST test
+will be run, the green LED will be switched off, and when the
+factory restore will be initiated, the reg LED will be switched off.
+
+
+Loggin of POST results:
+-----------------------
+
+The results of the POST tests are logged in a logbuffer located at the end
+of the onboard memory. It can be accessed with the U-Boot command "log":
+
+=> log show
+<4>POST memory PASSED
+<4>POST cache PASSED
+<4>POST cpu PASSED
+<4>POST uart PASSED
+<4>POST ethernet PASSED
+
+The DENX Linux kernel tree has support for this log buffer included. Exactly
+this buffer is used for logging of all kernel messages too. By enabling the
+compile time option "CONFIG_LOGBUFFER" this support is enabled. This way you
+can access the U-Boot log messages from Linux too.
+
+2007-08-10, Stefan Roese <sr@denx.de>
diff --git a/dtt/Makefile b/dtt/Makefile
index e6cb128..c6a670a 100644
--- a/dtt/Makefile
+++ b/dtt/Makefile
@@ -30,7 +30,7 @@
LIB = $(obj)libdtt.a
-COBJS = lm75.o ds1621.o adm1021.o lm81.o
+COBJS = lm75.o ds1621.o adm1021.o lm81.o ds1775.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/dtt/ds1775.c b/dtt/ds1775.c
new file mode 100644
index 0000000..e44cee3
--- /dev/null
+++ b/dtt/ds1775.c
@@ -0,0 +1,156 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Dallas Semiconductor's DS1775 Digital Thermometer and Thermostat
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DTT_DS1775
+#include <i2c.h>
+#include <dtt.h>
+
+#define DTT_I2C_DEV_CODE 0x49 /* Dallas Semi's DS1775 device code */
+
+int dtt_read(int sensor, int reg)
+{
+ int dlen;
+ uchar data[2];
+
+ /*
+ * Calculate sensor address and command
+ */
+ sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1775 */
+
+ /*
+ * Prepare to handle 2 byte result
+ */
+ if ((reg == DTT_READ_TEMP) ||
+ (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST))
+ dlen = 2;
+ else
+ dlen = 1;
+
+ /*
+ * Now try to read the register
+ */
+ if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+ return 1;
+
+ /*
+ * Handle 2 byte result
+ */
+ if (dlen == 2)
+ return ((int)((short)data[1] + (((short)data[0]) << 8)));
+
+ return (int) data[0];
+}
+
+
+int dtt_write(int sensor, int reg, int val)
+{
+ int dlen;
+ uchar data[2];
+
+ /*
+ * Calculate sensor address and register
+ */
+ sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
+
+ /*
+ * Handle various data sizes
+ */
+ if ((reg == DTT_READ_TEMP) ||
+ (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) {
+ dlen = 2;
+ data[0] = (char)((val >> 8) & 0xff); /* MSB first */
+ data[1] = (char)(val & 0xff);
+ } else {
+ dlen = 1;
+ data[0] = (char)(val & 0xff);
+ }
+
+ /*
+ * Write value to device
+ */
+ if (i2c_write(sensor, reg, 1, data, dlen) != 0)
+ return 1;
+
+ return 0;
+}
+
+
+static int _dtt_init(int sensor)
+{
+ int val;
+
+ /*
+ * Setup High Temp
+ */
+ val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80;
+ if (dtt_write(sensor, DTT_TEMP_OS, val) != 0)
+ return 1;
+ udelay(50000); /* Max 50ms */
+
+ /*
+ * Setup Low Temp - hysteresis
+ */
+ val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+ if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
+ return 1;
+ udelay(50000); /* Max 50ms */
+
+ /*
+ * Setup configuraton register
+ *
+ * Fault Tolerance limits 4, Thermometer resolution bits is 9,
+ * Polarity = Active Low,continuous conversion mode, Thermostat
+ * mode is interrupt mode
+ */
+ val = 0xa;
+ if (dtt_write(sensor, DTT_CONFIG, val) != 0)
+ return 1;
+ udelay(50000); /* Max 50ms */
+
+ return 0;
+}
+
+
+int dtt_init (void)
+{
+ int i;
+ unsigned char sensors[] = CONFIG_DTT_SENSORS;
+
+ for (i = 0; i < sizeof(sensors); i++) {
+ if (_dtt_init(sensors[i]) != 0)
+ printf("DTT%d: FAILED\n", i+1);
+ else
+ printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i]));
+ }
+
+ return (0);
+}
+
+
+int dtt_get_temp(int sensor)
+{
+ return (dtt_read(sensor, DTT_READ_TEMP) / 256);
+}
+
+
+#endif /* CONFIG_DTT_DS1775 */
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
new file mode 100644
index 0000000..61814a8
--- /dev/null
+++ b/include/configs/taihu.h
@@ -0,0 +1,473 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2005-2007
+ * Beijing UD Technology Co., Ltd., taihusupport@amcc.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+#define CONFIG_405EP 1 /* this is a PPC405 CPU */
+#define CONFIG_4xx 1 /* member of PPC4xx family */
+#define CONFIG_TAIHU 1 /* on a taihu board */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_NO_SERIAL_EEPROM
+
+/*----------------------------------------------------------------------------*/
+#ifdef CONFIG_NO_SERIAL_EEPROM
+
+/*
+!-------------------------------------------------------------------------------
+! PLL settings for 333MHz CPU, 111MHz PLB/SDRAM, 55MHz EBC, 33MHz PCI,
+! assuming a 33MHz input clock to the 405EP from the C9531.
+!-------------------------------------------------------------------------------
+*/
+#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_1)
+#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+
+#define PLLMR0_DEFAULT PLLMR0_333_111_55_37
+#define PLLMR1_DEFAULT PLLMR1_333_111_55_37
+#define PLLMR0_DEFAULT_PCI66 PLLMR0_333_111_55_111
+#define PLLMR1_DEFAULT_PCI66 PLLMR1_333_111_55_111
+
+#endif
+/*----------------------------------------------------------------------------*/
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootfile=/tftpboot/taihu/uImage\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "kernel_addr=FC000000\0" \
+ "ramdisk_addr=FC180000\0" \
+ "load=tftp 200000 /tftpboot/taihu/u-boot.bin\0" \
+ "update=protect off FFFC0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \
+ "cp.b 200000 FFFC0000 40000\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x14 /* PHY address */
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_SPI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */
+#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */
+#define CFG_SDRAM_BANKS 2
+
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */
+
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_UART1_CONSOLE 1
+
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
+
+#if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
+#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#endif
+
+
+#define CONFIG_SOFT_SPI
+#define SPI_SCL spi_scl
+#define SPI_SDA spi_sda
+#define SPI_READ spi_read()
+#define SPI_DELAY udelay(2)
+#ifndef __ASSEMBLY__
+void spi_scl(int);
+void spi_sda(int);
+unsigned char spi_read(void);
+#endif
+
+/* standard dtt sensor configuration */
+#define CONFIG_DTT_DS1775 1
+#define CONFIG_DTT_SENSORS { 0 }
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#define CONFIG_EEPRO100 1
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFE00000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_ADDR0 0x555
+#define CFG_FLASH_ADDR1 0x2aa
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */
+
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * PPC405 GPIO Configuration
+ */
+#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 */ \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast SPI CS */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 SPI SCLK */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 SPI DI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 SPI DO */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 PCI INTA */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 PCI INTB */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 PCI INTC */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 PCI INTD */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 USB */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 EBC */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 unused */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD UART1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \
+} \
+}
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0xFC000000 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash/SRAM) initialization */
+#define CFG_EBC_PB0AP 0x03815600
+#define CFG_EBC_PB0CR 0xFFE3A000 /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (NVRAM/RTC) initialization */
+#define CFG_EBC_PB1AP 0x05815600
+#define CFG_EBC_PB1CR 0xFC0BA000 /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 2 (USB device) initialization */
+#define CFG_EBC_PB2AP 0x03016600
+#define CFG_EBC_PB2CR 0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (LCM and D-flip-flop) initialization */
+#define CFG_EBC_PB3AP 0x158FF600
+#define CFG_EBC_PB3CR 0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 4 (not install) initialization */
+#define CFG_EBC_PB4AP 0x158FF600
+#define CFG_EBC_PB4CR 0x5021A000
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0] - External Bus Controller BLAST output
+ * GPIO0[1-9] - Instruction trace outputs
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
+ */
+#define CFG_GPIO0_OSRH 0x15555550 /* output select high/low */
+#define CFG_GPIO0_OSRL 0x00000110
+#define CFG_GPIO0_ISR1H 0x00000001 /* input select high/low */
+#define CFG_GPIO0_ISR1L 0x15545440
+#define CFG_GPIO0_TSRH 0x00000000 /* three-state select high/low */
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xFFFE8117 /* three-state control */
+#define CFG_GPIO0_ODR 0x00000000 /* open drain */
+
+#define GPIO0 0 /* GPIO controller 0 */
+
+/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */
+
+#define GPIOx_OSL (GPIO0_OSRH-GPIO_BASE)
+#define GPIOx_TSL (GPIO0_TSRH-GPIO_BASE)
+#define GPIOx_IS1L (GPIO0_ISR1H-GPIO_BASE)
+#define GPIOx_IS2L (GPIO0_ISR1H-GPIO_BASE)
+#define GPIOx_IS3L (GPIO0_ISR1H-GPIO_BASE)
+
+#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO output select */
+#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO three-state select */
+#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO input select */
+#define GPIO_IS2(x) (x+GPIOx_IS1L)
+#define GPIO_IS3(x) (x+GPIOx_IS1L)
+
+#define CPLD_REG0_ADDR 0x50100000
+#define CPLD_REG1_ADDR 0x50100001
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
new file mode 100644
index 0000000..86a16e7
--- /dev/null
+++ b/include/configs/zeus.h
@@ -0,0 +1,375 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * zeus.h - configuration for Zeus board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ZEUS 1 /* Board is Zeus */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405EP 1 /* Specifc 405EP support*/
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+#define PLLMR0_DEFAULT PLLMR0_333_111_55_111
+#define PLLMR1_DEFAULT PLLMR1_333_111_55_111
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x01 /* PHY address */
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_LOG | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO)
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_CACHE | \
+ CFG_POST_UART | \
+ CFG_POST_ETHER)
+
+#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE {UART0_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*-----------------------------------------------------------------------
+ * SDRAM
+ *----------------------------------------------------------------------*/
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */
+
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CFG_BASE_BAUD 691200
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* these are for the ST M24C02 2kbit serial i2c eeprom */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+
+#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */
+#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+/*
+ * The layout of the I2C EEPROM, used for bootstrap setup and for board-
+ * specific values, like ethaddr... that can be restored via the sw-reset
+ * button
+ */
+#define FACTORY_RESET_I2C_EEPROM 0x50
+#define FACTORY_RESET_ENV_OFFS 0x80
+#define FACTORY_RESET_ENV_SIZE 0x80
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFF000000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in OCM */
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12)
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash 16M) initialization */
+#define CFG_EBC_PB0AP 0x05815600
+#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0] - External Bus Controller BLAST output
+ * GPIO0[1-9] - Instruction trace outputs
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
+ */
+#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */
+#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */
+#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */
+#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */
+#define CFG_GPIO0_TSRH 0x00000000
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */
+#define CFG_GPIO0_ODR 0x00000000
+
+#define CFG_GPIO_SW_RESET 1
+#define CFG_GPIO_ZEUS_PE 12
+#define CFG_GPIO_LED_RED 22
+#define CFG_GPIO_LED_GREEN 23
+
+/* Time in milli-seconds */
+#define CFG_TIME_POST 5000
+#define CFG_TIME_FACTORY_RESET 10000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* ENVIRONMENT VARS */
+
+#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo"
+#define CONFIG_IPADDR 192.168.1.10
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_GATEWAYIP 192.168.1.100
+#define CONFIG_ETHADDR 50:00:00:00:06:00
+#define CONFIG_ETH1ADDR 50:00:00:00:06:01
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "logversion=2\0" \
+ "hostname=zeus\0" \
+ "netdev=eth0\0" \
+ "ethact=ppc_4xx_eth0\0" \
+ "netmask=255.255.255.0\0" \
+ "ramdisk_size=50000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw" \
+ " nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw" \
+ " ramdisk=${ramdisk_size}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0," \
+ "${baudrate}\0" \
+ "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \
+ "run nfsargs addip addtty;bootm\0" \
+ "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \
+ "tftp ${ramdisk_mem_addr} ${file_fs};" \
+ "run ramargs addip addtty;" \
+ "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \
+ "rootpath=/target_fs/zeus\0" \
+ "kernel_fl_addr=ff000000\0" \
+ "kernel_mem_addr=200000\0" \
+ "ramdisk_fl_addr=ff300000\0" \
+ "ramdisk_mem_addr=4000000\0" \
+ "uboot_fl_addr=fffc0000\0" \
+ "uboot_mem_addr=100000\0" \
+ "file_uboot=/zeus/u-boot.bin\0" \
+ "tftp_uboot=tftp 100000 ${file_uboot}\0" \
+ "update_uboot=protect off fffc0000 ffffffff;" \
+ "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \
+ "protect on fffc0000 ffffffff\0" \
+ "upd_uboot=run tftp_uboot;run update_uboot\0" \
+ "file_kernel=/zeus/uImage_ba\0" \
+ "tftp_kernel=tftp 100000 ${file_kernel}\0" \
+ "update_kernel=protect off ff000000 ff17ffff;" \
+ "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \
+ "upd_kernel=run tftp_kernel;run update_kernel\0" \
+ "file_fs=/zeus/rootfs_ba.img\0" \
+ "tftp_fs=tftp 100000 ${file_fs}\0" \
+ "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
+ "cp.b 100000 ff300000 580000\0" \
+ "upd_fs=run tftp_fs;run update_fs\0" \
+ "bootcmd=chkreset;run ramargs addip addtty addmisc;" \
+ "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \
+ ""
+
+#endif /* __CONFIG_H */
diff --git a/include/dtt.h b/include/dtt.h
index 842a761..2e8c690 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -29,6 +29,7 @@
#if defined(CONFIG_DTT_LM75) || \
defined(CONFIG_DTT_DS1621) || \
+ defined(CONFIG_DTT_DS1775) || \
defined(CONFIG_DTT_LM81) || \
defined(CONFIG_DTT_ADM1021)
@@ -78,6 +79,13 @@
#define DTT_CONFIG 0xAC
#endif
+#if defined(CONFIG_DTT_DS1775)
+#define DTT_READ_TEMP 0x0
+#define DTT_CONFIG 0x1
+#define DTT_TEMP_HYST 0x2
+#define DTT_TEMP_OS 0x3
+#endif
+
#if defined(CONFIG_DTT_ADM1021)
#define DTT_READ_LOC_VALUE 0x00
#define DTT_READ_REM_VALUE 0x01
diff --git a/include/ppc405.h b/include/ppc405.h
index e4522e7..0c7bf3e 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -541,6 +541,18 @@
#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_1)
+#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
/*
* PLL Voltage Controlled Oscillator (VCO) definitions
@@ -1228,6 +1240,8 @@
#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
+#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
#ifndef __ASSEMBLY__
diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c
index e1f989e..109ca1f 100644
--- a/post/cpu/ppc4xx/cache.c
+++ b/post/cpu/ppc4xx/cache.c
@@ -53,14 +53,25 @@
static int tlb = -1; /* index to the victim TLB entry */
+#ifdef CONFIG_440
static unsigned char testarea[CACHE_POST_SIZE]
__attribute__((__aligned__(CACHE_POST_SIZE)));
+#endif
int cache_post_test (int flags)
{
void* virt = (void*)CFG_POST_CACHE_ADDR;
- int ints, i, res = 0;
- u32 word0;
+ int ints;
+ int res = 0;
+
+ /*
+ * All 44x variants deal with cache management differently
+ * because they have the address translation always enabled.
+ * The 40x ppc's don't use address translation in U-Boot at all,
+ * so we have to distinguish here between 40x and 44x.
+ */
+#ifdef CONFIG_440
+ int word0, i;
if (tlb < 0) {
/*
@@ -83,6 +94,7 @@
}
}
}
+#endif
ints = disable_interrupts ();
WATCHDOG_RESET ();
diff --git a/post/cpu/ppc4xx/cache_4xx.S b/post/cpu/ppc4xx/cache_4xx.S
index dddd76b..d5cb075 100644
--- a/post/cpu/ppc4xx/cache_4xx.S
+++ b/post/cpu/ppc4xx/cache_4xx.S
@@ -37,6 +37,13 @@
.text
+ /*
+ * All 44x variants deal with cache management differently
+ * because they have the address translation always enabled.
+ * The 40x ppc's don't use address translation in U-Boot at all,
+ * so we have to distinguish here between 40x and 44x.
+ */
+#ifdef CONFIG_440
/* void cache_post_disable (int tlb)
*/
cache_post_disable:
@@ -68,6 +75,43 @@
sync
isync
blr
+#else
+/* void cache_post_disable (int tlb)
+ */
+cache_post_disable:
+ lis r0, 0x0000
+ ori r0, r0, 0x0000
+ mtdccr r0
+ sync
+ isync
+ blr
+
+/* void cache_post_wt (int tlb)
+ */
+cache_post_wt:
+ lis r0, 0x8000
+ ori r0, r0, 0x0000
+ mtdccr r0
+ lis r0, 0x8000
+ ori r0, r0, 0x0000
+ mtdcwr r0
+ sync
+ isync
+ blr
+
+/* void cache_post_wb (int tlb)
+ */
+cache_post_wb:
+ lis r0, 0x8000
+ ori r0, r0, 0x0000
+ mtdccr r0
+ lis r0, 0x0000
+ ori r0, r0, 0x0000
+ mtdcwr r0
+ sync
+ isync
+ blr
+#endif
/* void cache_post_dinvalidate (void *p, int size)
*/
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
index 391c815..ab23ca5 100644
--- a/post/cpu/ppc4xx/ether.c
+++ b/post/cpu/ppc4xx/ether.c
@@ -68,10 +68,10 @@
static void ether_post_init (int devnum, int hw_addr)
{
int i;
- unsigned mode_reg;
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ unsigned mode_reg;
sys_info_t sysinfo;
#endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
@@ -185,10 +185,17 @@
mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum));
/* set internal loopback mode */
+#ifdef CFG_POST_ETHER_EXT_LOOPBACK
+ out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | 0 |
+ EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+ EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+ in32 (EMAC_M1));
+#else
out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE |
EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
EMAC_M1_MF_100MBPS | EMAC_M1_IST |
in32 (EMAC_M1));
+#endif
/* set transmit enable & receive enable */
out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
index 0aeed75..5f14967 100644
--- a/post/cpu/ppc4xx/uart.c
+++ b/post/cpu/ppc4xx/uart.c
@@ -38,24 +38,77 @@
#if CONFIG_POST & CFG_POST_UART
+/*
+ * This table defines the UART's that should be tested and can
+ * be overridden in the board config file
+ */
+#ifndef CFG_POST_UART_TABLE
+#define CFG_POST_UART_TABLE {UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE}
+#endif
+
#include <asm/processor.h>
#include <serial.h>
+#if defined(CONFIG_440)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000500
#define UART3_BASE CFG_PERIPHERAL_BASE + 0x00000600
+#else
+#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
+#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
+#endif
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600
+#endif
+
+#if defined(CONFIG_440GP)
+#define CR0_MASK 0x3fff0000
+#define CR0_EXTCLK_ENA 0x00600000
+#define CR0_UDIV_POS 16
+#define UDIV_SUBTRACT 1
+#define UART0_SDR cntrl0
+#define MFREG(a, d) d = mfdcr(a)
+#define MTREG(a, d) mtdcr(a, d)
+#else /* #if defined(CONFIG_440GP) */
+/* all other 440 PPC's access clock divider via sdr register */
#define CR0_MASK 0xdfffffff
#define CR0_EXTCLK_ENA 0x00800000
#define CR0_UDIV_POS 0
#define UDIV_SUBTRACT 0
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPe)
#define UART2_SDR sdr_uart2
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx)
#define UART3_SDR sdr_uart3
+#endif
#define MFREG(a, d) mfsdr(a, d)
#define MTREG(a, d) mtsdr(a, d)
+#endif /* #if defined(CONFIG_440GP) */
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define UCR0_MASK 0x0000007f
+#define UCR1_MASK 0x00007f00
+#define UCR0_UDIV_POS 0
+#define UCR1_UDIV_POS 8
+#define UDIV_MAX 127
+#else /* CONFIG_405GP || CONFIG_405CR */
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define CR0_MASK 0x00001fff
+#define CR0_EXTCLK_ENA 0x000000c0
+#define CR0_UDIV_POS 1
+#define UDIV_MAX 32
+#endif
#define UART_RBR 0x00
#define UART_THR 0x00
@@ -71,8 +124,8 @@
#define UART_DLM 0x01
/*
- Line Status Register.
-*/
+ * Line Status Register.
+ */
#define asyncLSRDataReady1 0x01
#define asyncLSROverrunError1 0x02
#define asyncLSRParityError1 0x04
@@ -84,6 +137,7 @@
DECLARE_GLOBAL_DATA_PTR;
+<<<<<<< master
#if !defined(CFG_EXT_SERIAL_CLOCK)
static void serial_divs (int baudrate, unsigned long *pudiv,
unsigned short *pbdiv)
@@ -127,6 +181,9 @@
}
#endif
+=======
+#if defined(CONFIG_440)
+>>>>>>> zeus
static int uart_post_init (unsigned long dev_base)
{
unsigned long reg;
@@ -190,6 +247,77 @@
return 0;
}
+#else /* CONFIG_440 */
+
+static int uart_post_init (unsigned long dev_base)
+{
+ unsigned long reg;
+ unsigned long tmp;
+ unsigned long clk;
+ unsigned long udiv;
+ unsigned short bdiv;
+ volatile char val;
+ int i;
+
+ for (i = 0; i < 3500; i++) {
+ if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+ break;
+ udelay (100);
+ }
+
+#if defined(CONFIG_405EZ)
+ serial_divs(gd->baudrate, &udiv, &bdiv);
+ clk = tmp = reg = 0;
+#else
+#ifdef CONFIG_405EP
+ reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
+ clk = gd->cpu_clk;
+ tmp = CFG_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+ reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
+ reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
+ mtdcr (cpc0_ucr, reg);
+#else /* CONFIG_405EP */
+ reg = mfdcr(cntrl0) & ~CR0_MASK;
+#ifdef CFG_EXT_SERIAL_CLOCK
+ clk = CFG_EXT_SERIAL_CLOCK;
+ udiv = 1;
+ reg |= CR0_EXTCLK_ENA;
+#else
+ clk = gd->cpu_clk;
+#ifdef CFG_405_UART_ERRATA_59
+ udiv = 31; /* Errata 59: stuck at 31 */
+#else
+ tmp = CFG_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+#endif
+#endif
+ reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
+ mtdcr (cntrl0, reg);
+#endif /* CONFIG_405EP */
+ tmp = gd->baudrate * udiv * 16;
+ bdiv = (clk + tmp / 2) / tmp;
+#endif /* CONFIG_405EZ */
+
+ out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */
+ out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(dev_base + UART_FCR, 0x00); /* disable FIFO */
+ out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */
+ val = in8(dev_base + UART_LSR); /* clear line status */
+ val = in8(dev_base + UART_RBR); /* read receive buffer */
+ out8(dev_base + UART_SCR, 0x00); /* set scratchpad */
+ out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */
+
+ return (0);
+}
+#endif /* CONFIG_440 */
+
static void uart_post_putc (unsigned long dev_base, char c)
{
int i;
@@ -241,9 +369,7 @@
int uart_post_test (int flags)
{
int i, res = 0;
- static unsigned long base[] = {
- UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE
- };
+ static unsigned long base[] = CFG_POST_UART_TABLE;
for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
if (test_ctlr (base[i], i))