Merge branch 'master' of git://www.denx.de/git/u-boot-imx
diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig
index f9b1337..aa2f59d 100644
--- a/configs/udoo_neo_defconfig
+++ b/configs/udoo_neo_defconfig
@@ -13,22 +13,13 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
+CONFIG_DISTRO_DEFAULTS=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
CONFIG_OF_LIBFDT=y
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 65bb040..a2ea9b1 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -82,7 +82,7 @@
config NAND_MXS
bool "MXS NAND support"
- depends on MX6
+ depends on MX6 || MX7
help
This enables NAND driver for the NAND flash controller on the
MXS processors.
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 09783a2..1c0a762 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -93,10 +93,6 @@
#define CONFIG_MII
#define CONFIG_ARP_TIMEOUT 200UL
-/* Network config - Allow larger/faster download for TFTP/NFS */
-#define CONFIG_IP_DEFRAG
-#define CONFIG_TFTP_BLOCKSIZE 4096
-#define CONFIG_NFS_READ_SIZE 4096
/* Command definition */
#define CONFIG_CMD_BMODE
@@ -137,8 +133,8 @@
"update_uboot=if tftp ${uboot}; then " \
"if itest ${filesize} > 0; then " \
"mmc dev ${mmcdev}; mmc rescan; " \
- "setexpr blkc ${filesize} / 0x200; " \
- "setexpr blkc ${blkc} + 1; " \
+ "setexpr blkc ${filesize} + 0x1ff; " \
+ "setexpr blkc ${blkc} / 0x200; " \
"if itest ${blkc} <= ${uboot_size}; then " \
"mmc write ${loadaddr} ${uboot_start} " \
"${blkc}; " \
@@ -149,8 +145,8 @@
"if tftp ${kernel}; then " \
"if itest ${filesize} > 0; then " \
"mmc dev ${mmcdev}; mmc rescan; " \
- "setexpr blkc ${filesize} / 0x200; " \
- "setexpr blkc ${blkc} + 1; " \
+ "setexpr blkc ${filesize} + 0x1ff; " \
+ "setexpr blkc ${blkc} / 0x200; " \
"if itest ${blkc} <= ${kernel_size}; then " \
"mmc write ${loadaddr} " \
"${kernel_start} ${blkc}; " \
@@ -161,8 +157,8 @@
"update_fdt=if tftp ${fdt_file}; then " \
"if itest ${filesize} > 0; then " \
"mmc dev ${mmcdev}; mmc rescan; " \
- "setexpr blkc ${filesize} / 0x200; " \
- "setexpr blkc ${blkc} + 1; " \
+ "setexpr blkc ${filesize} + 0x1ff; " \
+ "setexpr blkc ${blkc} / 0x200; " \
"if itest ${blkc} <= ${fdt_size}; then " \
"mmc write ${loadaddr} ${fdt_start} ${blkc}; " \
"fi; " \
@@ -266,7 +262,7 @@
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${fdt_start} * " \
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "sf read ${${fdt_addr}} ${offset} ${size}; " \
+ "sf read ${fdt_addr} ${offset} ${size}; " \
"setenv size ; setenv offset\0" \
#define CONFIG_BOOTCOMMAND \
@@ -281,6 +277,9 @@
/* 128 MiB offset as in ARM related docu for linux suggested */
#define TQMA6_FDT_ADDRESS 0x18000000
+/* set to a resonable value, changeable by user */
+#define TQMA6_CMA_SIZE 160M
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"board=tqma6\0" \
"uimage=uImage\0" \
@@ -292,17 +291,21 @@
"uboot=u-boot.imx\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0" \
- "console=" CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
+ "cma_size="__stringify(TQMA6_CMA_SIZE)"\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
+ "rootfsmode=ro\0" \
+ "addcma=setenv bootargs ${bootargs} cma=${cma_size}\0" \
"addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
"addfb=setenv bootargs ${bootargs} " \
"imx-fbdev.legacyfb_depth=32 consoleblank=0\0" \
"mmcpart=2\0" \
"mmcblkdev=0\0" \
- "mmcargs=run addmmc addtty addfb\0" \
+ "mmcargs=run addmmc addtty addfb addcma\0" \
"addmmc=setenv bootargs ${bootargs} " \
- "root=/dev/mmcblk${mmcblkdev}p${mmcpart} rw rootwait\0" \
+ "root=/dev/mmcblk${mmcblkdev}p${mmcpart} ${rootfsmode} " \
+ "rootwait\0" \
"mmcboot=echo Booting from mmc ...; " \
"setenv bootargs; " \
"run mmcargs; " \
@@ -317,7 +320,7 @@
"netdev=eth0\0" \
"rootpath=/srv/nfs/tqma6\0" \
"ipmode=static\0" \
- "netargs=run addnfs addip addtty addfb\0" \
+ "netargs=run addnfs addip addtty addfb addcma\0" \
"addnfs=setenv bootargs ${bootargs} " \
"root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp;\0" \
diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
index 23a3685..1d737cc 100644
--- a/include/configs/udoo_neo.h
+++ b/include/configs/udoo_neo.h
@@ -30,6 +30,7 @@
/* Linux only */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=ttymxc0,115200\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdtfile=undefined\0" \
@@ -51,7 +52,7 @@
"echo WARNING: Could not determine dtb to use; fi\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
- "ramdisk_addr_r=0x83000000\0" \
+ "ramdisk_addr_r=0x84000000\0" \
"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
BOOTENV