ARM: dts: uniphier: sync clock/reset controller nodes with Linux
Sync device trees with Linux for easier DT life.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/dts/uniphier-ph1-ld20.dtsi b/arch/arm/dts/uniphier-ph1-ld20.dtsi
index 7497539..7f97f88 100644
--- a/arch/arm/dts/uniphier-ph1-ld20.dtsi
+++ b/arch/arm/dts/uniphier-ph1-ld20.dtsi
@@ -78,12 +78,6 @@
clock-frequency = <25000000>;
};
- uart_clk: uart_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <58820000>;
- };
-
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -93,10 +87,10 @@
timer {
compatible = "arm,armv8-timer";
- interrupts = <1 13 0xf01>,
- <1 14 0xf01>,
- <1 11 0xf01>,
- <1 10 0xf01>;
+ interrupts = <1 13 4>,
+ <1 14 4>,
+ <1 11 4>,
+ <1 10 4>;
};
soc {
@@ -113,7 +107,7 @@
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 0>;
clock-frequency = <58820000>;
};
@@ -124,7 +118,7 @@
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 1>;
clock-frequency = <58820000>;
};
@@ -135,7 +129,7 @@
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 2>;
clock-frequency = <58820000>;
};
@@ -146,7 +140,7 @@
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 3>;
clock-frequency = <58820000>;
};
@@ -237,10 +231,36 @@
reg = <0x59801000 0x400>;
};
- mio: mioctrl@59810000 {
- compatible = "socionext,ph1-ld20-mioctrl";
+ mioctrl@59810000 {
+ compatible = "socionext,uniphier-mioctrl",
+ "simple-mfd", "syscon";
reg = <0x59810000 0x800>;
- #clock-cells = <1>;
+
+ mio_clk: clock {
+ compatible = "socionext,uniphier-ld20-mio-clock";
+ #clock-cells = <1>;
+ };
+
+ mio_rst: reset {
+ compatible = "socionext,uniphier-ld20-mio-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ perictrl@59820000 {
+ compatible = "socionext,uniphier-perictrl",
+ "simple-mfd", "syscon";
+ reg = <0x59820000 0x200>;
+
+ peri_clk: clock {
+ compatible = "socionext,uniphier-ld20-peri-clock";
+ #clock-cells = <1>;
+ };
+
+ peri_rst: reset {
+ compatible = "socionext,uniphier-ld20-peri-reset";
+ #reset-cells = <1>;
+ };
};
sd: sdhc@5a400000 {
@@ -250,12 +270,13 @@
interrupts = <0 76 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd>;
- clocks = <&mio 0>;
+ clocks = <&mio_clk 0>;
bus-width = <4>;
};
soc-glue@5f800000 {
- compatible = "simple-mfd", "syscon";
+ compatible = "socionext,uniphier-soc-glue",
+ "simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
u-boot,dm-pre-reloc;
@@ -278,6 +299,22 @@
#interrupt-cells = <3>;
interrupts = <1 9 4>;
};
+
+ sysctrl@61840000 {
+ compatible = "socionext,uniphier-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0x61840000 0x4000>;
+
+ sys_clk: clock {
+ compatible = "socionext,uniphier-ld20-clock";
+ #clock-cells = <1>;
+ };
+
+ sys_rst: reset {
+ compatible = "socionext,uniphier-ld20-reset";
+ #reset-cells = <1>;
+ };
+ };
};
};