ARM: socfpga: add support for IS1 board
This adds support for IS1 board. Pretty usual socfpga board,
256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two
additional ethernet ports connected to the FPGA.
Signed-off-by: Pavel Machek <pavel@denx.de>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a827613..f81bd8b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -105,6 +105,7 @@
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
+ socfpga_cyclone5_is1.dtb \
socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_de0_nano_soc.dtb \
diff --git a/arch/arm/dts/socfpga_cyclone5_is1.dts b/arch/arm/dts/socfpga_cyclone5_is1.dts
new file mode 100644
index 0000000..16a3283
--- /dev/null
+++ b/arch/arm/dts/socfpga_cyclone5_is1.dts
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "SoCFPGA Cyclone V IS1";
+ compatible = "anonymous,socfpga-is1", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ aliases {
+ ethernet0 = &gmac1;
+ udc0 = &usb1;
+ };
+
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <2600>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <2000>;
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&mmc0 {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ cd-gpios = <&portb 18 0>;
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+};
+
+&qspi {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ flash0: n25q00@0 {
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q00";
+ reg = <0>; /* chip select */
+ spi-max-frequency = <100000000>;
+ m25p,fast-read;
+ page-size = <256>;
+ block-size = <16>; /* 2^16, 64KB */
+ read-delay = <4>; /* delay value in read data capture register */
+ tshsl-ns = <50>;
+ tsd2d-ns = <50>;
+ tchsh-ns = <4>;
+ tslch-ns = <4>;
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 1484607..c4432cf 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -35,6 +35,10 @@
bool "EBV SoCrates (Cyclone V)"
select TARGET_SOCFPGA_CYCLONE5
+config TARGET_SOCFPGA_IS1
+ bool "IS1 (Cyclone V)"
+ select TARGET_SOCFPGA_CYCLONE5
+
config TARGET_SOCFPGA_SAMTEC_VINING_FPGA
bool "samtec VIN|ING FPGA (Cyclone V)"
select TARGET_SOCFPGA_CYCLONE5
@@ -53,6 +57,7 @@
default "arria5-socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
default "cyclone5-socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
+ default "is1" if TARGET_SOCFPGA_IS1
default "mcvevk" if TARGET_SOCFPGA_DENX_MCVEVK
default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES
@@ -75,6 +80,7 @@
default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
+ default "socfpga_is1" if TARGET_SOCFPGA_IS1
default "socfpga_mcvevk" if TARGET_SOCFPGA_DENX_MCVEVK
default "socfpga_sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
default "socfpga_socrates" if TARGET_SOCFPGA_EBV_SOCRATES