| /* |
| * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __FSL_NFC_H |
| #define __FSL_NFC_H |
| |
| /* |
| * Register map and bit definitions for the Freescale NAND Flash Controller |
| * present in various i.MX devices. |
| * |
| * MX31 and MX27 have version 1, which has: |
| * 4 512-byte main buffers and |
| * 4 16-byte spare buffers |
| * to support up to 2K byte pagesize nand. |
| * Reading or writing a 2K page requires 4 FDI/FDO cycles. |
| * |
| * MX25 and MX35 have version 1.1, which has: |
| * 8 512-byte main buffers and |
| * 8 64-byte spare buffers |
| * to support up to 4K byte pagesize nand. |
| * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle. |
| * Also some of registers are moved and/or changed meaning as seen below. |
| */ |
| #if defined(CONFIG_MX27) || defined(CONFIG_MX31) |
| #define MXC_NFC_V1 |
| #elif defined(CONFIG_MX25) || defined(CONFIG_MX35) |
| #define MXC_NFC_V1_1 |
| #else |
| #warning "MXC NFC version not defined" |
| #endif |
| |
| #if defined(MXC_NFC_V1) |
| #define NAND_MXC_NR_BUFS 4 |
| #define NAND_MXC_SPARE_BUF_SIZE 16 |
| #define NAND_MXC_REG_OFFSET 0xe00 |
| #define NAND_MXC_2K_MULTI_CYCLE |
| #define is_mxc_nfc_11() 0 |
| #elif defined(MXC_NFC_V1_1) |
| #define NAND_MXC_NR_BUFS 8 |
| #define NAND_MXC_SPARE_BUF_SIZE 64 |
| #define NAND_MXC_REG_OFFSET 0x1e00 |
| #define is_mxc_nfc_11() 1 |
| #else |
| #error "define CONFIG_NAND_MXC_VXXX to use the mxc nand driver" |
| #endif |
| |
| struct fsl_nfc_regs { |
| u8 main_area[NAND_MXC_NR_BUFS][0x200]; |
| u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE]; |
| /* |
| * reserved size is offset of nfc registers |
| * minus total main and spare sizes |
| */ |
| u8 reserved1[NAND_MXC_REG_OFFSET |
| - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)]; |
| #if defined(MXC_NFC_V1) |
| u16 buf_size; |
| u16 reserved2; |
| u16 buf_addr; |
| u16 flash_addr; |
| u16 flash_cmd; |
| u16 config; |
| u16 ecc_status_result; |
| u16 rsltmain_area; |
| u16 rsltspare_area; |
| u16 wrprot; |
| u16 unlockstart_blkaddr; |
| u16 unlockend_blkaddr; |
| u16 nf_wrprst; |
| u16 config1; |
| u16 config2; |
| #elif defined(MXC_NFC_V1_1) |
| u16 reserved2[2]; |
| u16 buf_addr; |
| u16 flash_addr; |
| u16 flash_cmd; |
| u16 config; |
| u16 ecc_status_result; |
| u16 ecc_status_result2; |
| u16 spare_area_size; |
| u16 wrprot; |
| u16 reserved3[2]; |
| u16 nf_wrprst; |
| u16 config1; |
| u16 config2; |
| u16 reserved4; |
| u16 unlockstart_blkaddr; |
| u16 unlockend_blkaddr; |
| u16 unlockstart_blkaddr1; |
| u16 unlockend_blkaddr1; |
| u16 unlockstart_blkaddr2; |
| u16 unlockend_blkaddr2; |
| u16 unlockstart_blkaddr3; |
| u16 unlockend_blkaddr3; |
| #endif |
| }; |
| |
| /* |
| * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command |
| * operation |
| */ |
| #define NFC_CMD 0x1 |
| |
| /* |
| * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address |
| * operation |
| */ |
| #define NFC_ADDR 0x2 |
| |
| /* |
| * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input |
| * operation |
| */ |
| #define NFC_INPUT 0x4 |
| |
| /* |
| * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data |
| * Output operation |
| */ |
| #define NFC_OUTPUT 0x8 |
| |
| /* |
| * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID |
| * operation |
| */ |
| #define NFC_ID 0x10 |
| |
| /* |
| * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read |
| * Status operation |
| */ |
| #define NFC_STATUS 0x20 |
| |
| /* |
| * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status |
| * operation |
| */ |
| #define NFC_INT 0x8000 |
| |
| #ifdef MXC_NFC_V1_1 |
| #define NFC_4_8N_ECC (1 << 0) |
| #endif |
| #define NFC_SP_EN (1 << 2) |
| #define NFC_ECC_EN (1 << 3) |
| #define NFC_INT_MSK (1 << 4) |
| #define NFC_BIG (1 << 5) |
| #define NFC_RST (1 << 6) |
| #define NFC_CE (1 << 7) |
| #define NFC_ONE_CYCLE (1 << 8) |
| #define NFC_FP_INT (1 << 11) |
| |
| #endif /* __FSL_NFC_H */ |