drivers: mmc: Add sdhci driver for Broadcom iProc platform
Add SDHCI driver for iProc family of Broadcom devices.
Signed-off-by: Corneliu Doban <corneliu.doban@broadcom.com>
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Pavithra Ravi <pavithra.ravi@broadcom.com>
Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
diff --git a/drivers/mmc/iproc_sdhci.c b/drivers/mmc/iproc_sdhci.c
new file mode 100644
index 0000000..831dd32
--- /dev/null
+++ b/drivers/mmc/iproc_sdhci.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Broadcom.
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sdhci_iproc_host {
+ struct sdhci_host host;
+ u32 shadow_cmd;
+ u32 shadow_blk;
+};
+
+#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
+
+static inline struct sdhci_iproc_host *to_iproc(struct sdhci_host *host)
+{
+ return (struct sdhci_iproc_host *)host;
+}
+
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+static u32 sdhci_iproc_readl(struct sdhci_host *host, int reg)
+{
+ u32 val = readl(host->ioaddr + reg);
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS_TRACE
+ printf("%s %d: readl [0x%02x] 0x%08x\n",
+ host->name, host->index, reg, val);
+#endif
+ return val;
+}
+
+static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
+{
+ u32 val = sdhci_iproc_readl(host, (reg & ~3));
+ u16 word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
+ return word;
+}
+
+static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg)
+{
+ u32 val = sdhci_iproc_readl(host, (reg & ~3));
+ u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff;
+ return byte;
+}
+
+static void sdhci_iproc_writel(struct sdhci_host *host, u32 val, int reg)
+{
+ u32 clock = 0;
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS_TRACE
+ printf("%s %d: writel [0x%02x] 0x%08x\n",
+ host->name, host->index, reg, val);
+#endif
+ writel(val, host->ioaddr + reg);
+
+ if (host->mmc)
+ clock = host->mmc->clock;
+ if (clock <= 400000) {
+ /* Round up to micro-second four SD clock delay */
+ if (clock)
+ udelay((4 * 1000000 + clock - 1) / clock);
+ else
+ udelay(10);
+ }
+}
+
+/*
+ * The Arasan has a bugette whereby it may lose the content of successive
+ * writes to the same register that are within two SD-card clock cycles of
+ * each other (a clock domain crossing problem). The data
+ * register does not have this problem, which is just as well - otherwise we'd
+ * have to nobble the DMA engine too.
+ *
+ * This wouldn't be a problem with the code except that we can only write the
+ * controller with 32-bit writes. So two different 16-bit registers are
+ * written back to back creates the problem.
+ *
+ * In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT
+ * are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND.
+ * The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so
+ * the work around can be further optimized. We can keep shadow values of
+ * BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued.
+ * Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed
+ * by the TRANSFER+COMMAND in another 32-bit write.
+ */
+static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ struct sdhci_iproc_host *iproc_host = to_iproc(host);
+ u32 word_shift = REG_OFFSET_IN_BITS(reg);
+ u32 mask = 0xffff << word_shift;
+ u32 oldval, newval;
+
+ if (reg == SDHCI_COMMAND) {
+ /* Write the block now as we are issuing a command */
+ if (iproc_host->shadow_blk != 0) {
+ sdhci_iproc_writel(host, iproc_host->shadow_blk,
+ SDHCI_BLOCK_SIZE);
+ iproc_host->shadow_blk = 0;
+ }
+ oldval = iproc_host->shadow_cmd;
+ } else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
+ /* Block size and count are stored in shadow reg */
+ oldval = iproc_host->shadow_blk;
+ } else {
+ /* Read reg, all other registers are not shadowed */
+ oldval = sdhci_iproc_readl(host, (reg & ~3));
+ }
+ newval = (oldval & ~mask) | (val << word_shift);
+
+ if (reg == SDHCI_TRANSFER_MODE) {
+ /* Save the transfer mode until the command is issued */
+ iproc_host->shadow_cmd = newval;
+ } else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
+ /* Save the block info until the command is issued */
+ iproc_host->shadow_blk = newval;
+ } else {
+ /* Command or other regular 32-bit write */
+ sdhci_iproc_writel(host, newval, reg & ~3);
+ }
+}
+
+static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+ u32 oldval = sdhci_iproc_readl(host, (reg & ~3));
+ u32 byte_shift = REG_OFFSET_IN_BITS(reg);
+ u32 mask = 0xff << byte_shift;
+ u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+ sdhci_iproc_writel(host, newval, reg & ~3);
+}
+#endif
+
+static void sdhci_iproc_set_ios_post(struct sdhci_host *host)
+{
+ u32 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+ /* Reset UHS mode bits */
+ ctrl &= ~SDHCI_CTRL_UHS_MASK;
+
+ if (host->mmc->ddr_mode)
+ ctrl |= UHS_DDR50_BUS_SPEED;
+
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+}
+
+static struct sdhci_ops sdhci_platform_ops = {
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+ .read_l = sdhci_iproc_readl,
+ .read_w = sdhci_iproc_readw,
+ .read_b = sdhci_iproc_readb,
+ .write_l = sdhci_iproc_writel,
+ .write_w = sdhci_iproc_writew,
+ .write_b = sdhci_iproc_writeb,
+#endif
+ .set_ios_post = sdhci_iproc_set_ios_post,
+};
+
+struct iproc_sdhci_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+static int iproc_sdhci_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct iproc_sdhci_plat *plat = dev_get_platdata(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+ struct sdhci_iproc_host *iproc_host;
+ int node = dev_of_offset(dev);
+ u32 f_min_max[2];
+ int ret;
+
+ iproc_host = (struct sdhci_iproc_host *)
+ malloc(sizeof(struct sdhci_iproc_host));
+ if (!iproc_host) {
+ printf("%s: sdhci host malloc fail!\n", __func__);
+ return -ENOMEM;
+ }
+ iproc_host->shadow_cmd = 0;
+ iproc_host->shadow_blk = 0;
+
+ host->name = dev->name;
+ host->ioaddr = (void *)devfdt_get_addr(dev);
+ host->voltages = MMC_VDD_165_195 |
+ MMC_VDD_32_33 | MMC_VDD_33_34;
+ host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE;
+ host->host_caps = MMC_MODE_DDR_52MHz;
+ host->index = fdtdec_get_uint(gd->fdt_blob, node, "index", 0);
+ host->ops = &sdhci_platform_ops;
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+ ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
+ "clock-freq-min-max", f_min_max, 2);
+ if (ret) {
+ printf("sdhci: clock-freq-min-max not found\n");
+ return ret;
+ }
+ host->max_clk = f_min_max[1];
+ host->bus_width = fdtdec_get_int(gd->fdt_blob,
+ dev_of_offset(dev), "bus-width", 4);
+
+ /* Update host_caps for 8 bit bus width */
+ if (host->bus_width == 8)
+ host->host_caps |= MMC_MODE_8BIT;
+
+ memcpy(&iproc_host->host, host, sizeof(struct sdhci_host));
+
+ ret = sdhci_setup_cfg(&plat->cfg, &iproc_host->host,
+ f_min_max[1], f_min_max[0]);
+ if (ret)
+ return ret;
+
+ iproc_host->host.mmc = &plat->mmc;
+ iproc_host->host.mmc->dev = dev;
+ iproc_host->host.mmc->priv = &iproc_host->host;
+ upriv->mmc = iproc_host->host.mmc;
+
+ return sdhci_probe(dev);
+}
+
+static int iproc_sdhci_bind(struct udevice *dev)
+{
+ struct iproc_sdhci_plat *plat = dev_get_platdata(dev);
+
+ return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static const struct udevice_id iproc_sdhci_ids[] = {
+ { .compatible = "brcm,iproc-sdhci" },
+ { }
+};
+
+U_BOOT_DRIVER(iproc_sdhci_drv) = {
+ .name = "iproc_sdhci",
+ .id = UCLASS_MMC,
+ .of_match = iproc_sdhci_ids,
+ .ops = &sdhci_ops,
+ .bind = iproc_sdhci_bind,
+ .probe = iproc_sdhci_probe,
+ .priv_auto_alloc_size = sizeof(struct sdhci_host),
+ .platdata_auto_alloc_size = sizeof(struct iproc_sdhci_plat),
+};