Merge branch 'master' of git://git.denx.de/u-boot-spi
- drop non-DM code from ti_qspi
- support spi-mem for ti_qspi
diff --git a/doc/driver-model/MIGRATION.txt b/doc/driver-model/MIGRATION.txt
index 9575292..df659f3 100644
--- a/doc/driver-model/MIGRATION.txt
+++ b/doc/driver-model/MIGRATION.txt
@@ -77,7 +77,6 @@
drivers/spi/kirkwood_spi.c
drivers/spi/mxc_spi.c
drivers/spi/omap3_spi.c
- drivers/spi/ti_qspi.c
Status: In progress
Deadline: 2019.07
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index a700f24..fb794ad 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -259,6 +259,13 @@
be used to access SPI chips on platforms embedding this
NVIDIA Tegra210 IP core.
+config TI_QSPI
+ bool "TI QSPI driver"
+ imply TI_EDMA3
+ help
+ Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
+ This driver support spi flash single, quad and memory reads.
+
config XILINX_SPI
bool "Xilinx SPI driver"
help
@@ -346,12 +353,6 @@
Enable the Renesas Quad SPI controller driver. This driver can be
used on Renesas SoCs.
-config TI_QSPI
- bool "TI QSPI driver"
- help
- Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
- This driver support spi flash single, quad and memory reads.
-
config KIRKWOOD_SPI
bool "Marvell Kirkwood SPI Driver"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 01907be..8be9a4b 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
obj-$(CONFIG_SPI_MEM) += spi-mem.o
+obj-$(CONFIG_TI_QSPI) += ti_qspi.o
else
obj-y += spi.o
obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
@@ -56,7 +57,6 @@
obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
obj-$(CONFIG_TEGRA210_QSPI) += tegra210_qspi.o
-obj-$(CONFIG_TI_QSPI) += ti_qspi.o
obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o
obj-$(CONFIG_ZYNQ_SPI) += zynq_spi.o
obj-$(CONFIG_ZYNQ_QSPI) += zynq_qspi.o
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 2dcce66..77fa17e 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -10,6 +10,7 @@
#include <asm/arch/omap.h>
#include <malloc.h>
#include <spi.h>
+#include <spi-mem.h>
#include <dm.h>
#include <asm/gpio.h>
#include <asm/omap_gpio.h>
@@ -40,7 +41,6 @@
#define QSPI_INVAL (4 << 16)
#define QSPI_RD_QUAD (7 << 16)
/* device control */
-#define QSPI_DD(m, n) (m << (3 + n*8))
#define QSPI_CKPHA(n) (1 << (2 + n*8))
#define QSPI_CSPOL(n) (1 << (1 + n*8))
#define QSPI_CKPOL(n) (1 << (n*8))
@@ -52,22 +52,12 @@
#define MM_SWITCH 0x01
#define MEM_CS(cs) ((cs + 1) << 8)
#define MEM_CS_UNSELECT 0xfffff8ff
-#define MMAP_START_ADDR_DRA 0x5c000000
-#define MMAP_START_ADDR_AM43x 0x30000000
-#define CORE_CTRL_IO 0x4a002558
-#define QSPI_CMD_READ (0x3 << 0)
-#define QSPI_CMD_READ_DUAL (0x6b << 0)
-#define QSPI_CMD_READ_QUAD (0x6c << 0)
-#define QSPI_CMD_READ_FAST (0x0b << 0)
-#define QSPI_SETUP0_NUM_A_BYTES (0x3 << 8)
-#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
-#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10)
#define QSPI_SETUP0_READ_NORMAL (0x0 << 12)
#define QSPI_SETUP0_READ_DUAL (0x1 << 12)
#define QSPI_SETUP0_READ_QUAD (0x3 << 12)
-#define QSPI_CMD_WRITE (0x12 << 16)
-#define QSPI_NUM_DUMMY_BITS (0x0 << 24)
+#define QSPI_SETUP0_ADDR_SHIFT (8)
+#define QSPI_SETUP0_DBITS_SHIFT (10)
/* ti qspi register set */
struct ti_qspi_regs {
@@ -98,13 +88,10 @@
/* ti qspi priv */
struct ti_qspi_priv {
-#ifndef CONFIG_DM_SPI
- struct spi_slave slave;
-#else
void *memory_map;
+ size_t mmap_size;
uint max_hz;
u32 num_cs;
-#endif
struct ti_qspi_regs *base;
void *ctrl_mod_mmap;
ulong fclk;
@@ -113,8 +100,9 @@
u32 dc;
};
-static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
+static int ti_qspi_set_speed(struct udevice *bus, uint hz)
{
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
uint clk_div;
if (!hz)
@@ -133,6 +121,8 @@
&priv->base->clk_ctrl);
/* enable SCLK and program the clk divider */
writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
+
+ return 0;
}
static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
@@ -142,38 +132,6 @@
readl(&priv->base->cmd);
}
-static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
-{
- priv->dc = 0;
- if (mode & SPI_CPHA)
- priv->dc |= QSPI_CKPHA(0);
- if (mode & SPI_CPOL)
- priv->dc |= QSPI_CKPOL(0);
- if (mode & SPI_CS_HIGH)
- priv->dc |= QSPI_CSPOL(0);
-
- return 0;
-}
-
-static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs)
-{
- writel(priv->dc, &priv->base->dc);
- writel(0, &priv->base->cmd);
- writel(0, &priv->base->data);
-
- priv->dc <<= cs * 8;
- writel(priv->dc, &priv->base->dc);
-
- return 0;
-}
-
-static void __ti_qspi_release_bus(struct ti_qspi_priv *priv)
-{
- writel(0, &priv->base->dc);
- writel(0, &priv->base->cmd);
- writel(0, &priv->base->data);
-}
-
static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
{
u32 val;
@@ -186,27 +144,25 @@
writel(val, ctrl_mod_mmap);
}
-static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags,
- u32 cs)
+static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
+ struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
uint words = bitlen >> 3; /* fixed 8-bit word length */
const uchar *txp = dout;
uchar *rxp = din;
uint status;
int timeout;
+ unsigned int cs = slave->cs;
- /* Setup mmap flags */
- if (flags & SPI_XFER_MMAP) {
- writel(MM_SWITCH, &priv->base->memswitch);
- if (priv->ctrl_mod_mmap)
- ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, true);
- return 0;
- } else if (flags & SPI_XFER_MMAP_END) {
- writel(~MM_SWITCH, &priv->base->memswitch);
- if (priv->ctrl_mod_mmap)
- ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, false);
- return 0;
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ if (cs > priv->num_cs) {
+ debug("invalid qspi chip select\n");
+ return -EINVAL;
}
if (bitlen == 0)
@@ -294,9 +250,9 @@
}
/* TODO: control from sf layer to here through dm-spi */
-#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
-void spi_flash_copy_mmap(void *data, void *offset, size_t len)
+static void ti_qspi_copy_mmap(void *data, void *offset, size_t len)
{
+#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
unsigned int addr = (unsigned int) (data);
unsigned int edma_slot_num = 1;
@@ -311,187 +267,85 @@
/* disable edma3 clocks */
disable_edma3_clocks();
+#else
+ memcpy_fromio(data, offset, len);
+#endif
*((unsigned int *)offset) += len;
}
-#endif
-#ifndef CONFIG_DM_SPI
-
-static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
+static void ti_qspi_setup_mmap_read(struct ti_qspi_priv *priv, u8 opcode,
+ u8 data_nbits, u8 addr_width,
+ u8 dummy_bytes)
{
- return container_of(slave, struct ti_qspi_priv, slave);
-}
+ u32 memval = opcode;
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- /* CS handled in xfer */
- return;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
- ti_qspi_cs_deactivate(priv);
-}
-
-void spi_init(void)
-{
- /* nothing to do */
-}
-
-static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
-{
- u32 memval = 0;
-
-#ifdef CONFIG_QSPI_QUAD_SUPPORT
- struct spi_slave *slave = &priv->slave;
- memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
- QSPI_SETUP0_NUM_D_BYTES_8_BITS |
- QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
- QSPI_NUM_DUMMY_BITS);
- slave->mode |= SPI_RX_QUAD;
-#else
- memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
- QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
- QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
- QSPI_NUM_DUMMY_BITS;
-#endif
-
- writel(memval, &priv->base->setup0);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct ti_qspi_priv *priv;
-
-#ifdef CONFIG_AM43XX
- gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
- gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
-#endif
-
- priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
- if (!priv) {
- printf("SPI_error: Fail to allocate ti_qspi_priv\n");
- return NULL;
- }
-
- priv->base = (struct ti_qspi_regs *)QSPI_BASE;
- priv->mode = mode;
-#if defined(CONFIG_DRA7XX)
- priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
- priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
- priv->fclk = QSPI_DRA7XX_FCLK;
-#else
- priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
- priv->fclk = QSPI_FCLK;
-#endif
-
- ti_spi_set_speed(priv, max_hz);
-
-#ifdef CONFIG_TI_SPI_MMAP
- ti_spi_setup_spi_register(priv);
-#endif
-
- return &priv->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
- free(priv);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
- __ti_qspi_set_mode(priv, priv->mode);
- return __ti_qspi_claim_bus(priv, priv->slave.cs);
-}
-void spi_release_bus(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
- __ti_qspi_release_bus(priv);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n",
- priv->slave.bus, priv->slave.cs, bitlen, flags);
- return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
-}
-
-#else /* CONFIG_DM_SPI */
-
-static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
- struct spi_slave *slave,
- bool enable)
-{
- u32 memval;
- u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
-
- if (!enable) {
- writel(0, &priv->base->setup0);
- return;
- }
-
- memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
-
- switch (mode) {
- case SPI_RX_QUAD:
- memval |= QSPI_CMD_READ_QUAD;
- memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ switch (data_nbits) {
+ case 4:
memval |= QSPI_SETUP0_READ_QUAD;
- slave->mode |= SPI_RX_QUAD;
break;
- case SPI_RX_DUAL:
- memval |= QSPI_CMD_READ_DUAL;
- memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ case 2:
memval |= QSPI_SETUP0_READ_DUAL;
break;
default:
- memval |= QSPI_CMD_READ;
- memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
memval |= QSPI_SETUP0_READ_NORMAL;
break;
}
+ memval |= ((addr_width - 1) << QSPI_SETUP0_ADDR_SHIFT |
+ dummy_bytes << QSPI_SETUP0_DBITS_SHIFT);
+
writel(memval, &priv->base->setup0);
}
-
-static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
-{
- struct ti_qspi_priv *priv = dev_get_priv(bus);
-
- ti_spi_set_speed(priv, max_hz);
-
- return 0;
-}
-
static int ti_qspi_set_mode(struct udevice *bus, uint mode)
{
struct ti_qspi_priv *priv = dev_get_priv(bus);
- return __ti_qspi_set_mode(priv, mode);
+
+ priv->dc = 0;
+ if (mode & SPI_CPHA)
+ priv->dc |= QSPI_CKPHA(0);
+ if (mode & SPI_CPOL)
+ priv->dc |= QSPI_CKPOL(0);
+ if (mode & SPI_CS_HIGH)
+ priv->dc |= QSPI_CSPOL(0);
+
+ return 0;
+}
+
+static int ti_qspi_exec_mem_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = slave->dev->parent;
+ priv = dev_get_priv(bus);
+ u32 from = 0;
+ int ret = 0;
+
+ /* Only optimize read path. */
+ if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN ||
+ !op->addr.nbytes || op->addr.nbytes > 4)
+ return -ENOTSUPP;
+
+ /* Address exceeds MMIO window size, fall back to regular mode. */
+ from = op->addr.val;
+ if (from + op->data.nbytes > priv->mmap_size)
+ return -ENOTSUPP;
+
+ ti_qspi_setup_mmap_read(priv, op->cmd.opcode, op->data.buswidth,
+ op->addr.nbytes, op->dummy.nbytes);
+
+ ti_qspi_copy_mmap((void *)op->data.buf.in,
+ (void *)priv->memory_map + from, op->data.nbytes);
+
+ return ret;
}
static int ti_qspi_claim_bus(struct udevice *dev)
{
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
- struct spi_slave *slave = dev_get_parent_priv(dev);
struct ti_qspi_priv *priv;
struct udevice *bus;
@@ -503,42 +357,41 @@
return -EINVAL;
}
- __ti_qspi_setup_memorymap(priv, slave, true);
+ writel(MM_SWITCH, &priv->base->memswitch);
+ if (priv->ctrl_mod_mmap)
+ ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+ slave_plat->cs, true);
- return __ti_qspi_claim_bus(priv, slave_plat->cs);
-}
+ writel(priv->dc, &priv->base->dc);
+ writel(0, &priv->base->cmd);
+ writel(0, &priv->base->data);
-static int ti_qspi_release_bus(struct udevice *dev)
-{
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct ti_qspi_priv *priv;
- struct udevice *bus;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
-
- __ti_qspi_setup_memorymap(priv, slave, false);
- __ti_qspi_release_bus(priv);
+ priv->dc <<= slave_plat->cs * 8;
+ writel(priv->dc, &priv->base->dc);
return 0;
}
-static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
+static int ti_qspi_release_bus(struct udevice *dev)
{
- struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
struct ti_qspi_priv *priv;
struct udevice *bus;
bus = dev->parent;
priv = dev_get_priv(bus);
- if (slave->cs > priv->num_cs) {
- debug("invalid qspi chip select\n");
- return -EINVAL;
- }
+ writel(~MM_SWITCH, &priv->base->memswitch);
+ if (priv->ctrl_mod_mmap)
+ ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+ slave_plat->cs, false);
- return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
+ writel(0, &priv->base->dc);
+ writel(0, &priv->base->cmd);
+ writel(0, &priv->base->data);
+ writel(0, &priv->base->setup0);
+
+ return 0;
}
static int ti_qspi_probe(struct udevice *bus)
@@ -594,12 +447,15 @@
struct ti_qspi_priv *priv = dev_get_priv(bus);
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
+ fdt_addr_t mmap_addr;
+ fdt_addr_t mmap_size;
priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
priv->base = map_physmem(devfdt_get_addr(bus),
sizeof(struct ti_qspi_regs), MAP_NOCACHE);
- priv->memory_map = map_physmem(devfdt_get_addr_index(bus, 1), 0,
- MAP_NOCACHE);
+ mmap_addr = devfdt_get_addr_size_index(bus, 1, &mmap_size);
+ priv->memory_map = map_physmem(mmap_addr, mmap_size, MAP_NOCACHE);
+ priv->mmap_size = mmap_size;
priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
if (priv->max_hz < 0) {
@@ -614,15 +470,9 @@
return 0;
}
-static int ti_qspi_child_pre_probe(struct udevice *dev)
-{
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct udevice *bus = dev_get_parent(dev);
- struct ti_qspi_priv *priv = dev_get_priv(bus);
-
- slave->memory_map = priv->memory_map;
- return 0;
-}
+static const struct spi_controller_mem_ops ti_qspi_mem_ops = {
+ .exec_op = ti_qspi_exec_mem_op,
+};
static const struct dm_spi_ops ti_qspi_ops = {
.claim_bus = ti_qspi_claim_bus,
@@ -630,6 +480,7 @@
.xfer = ti_qspi_xfer,
.set_speed = ti_qspi_set_speed,
.set_mode = ti_qspi_set_mode,
+ .mem_ops = &ti_qspi_mem_ops,
};
static const struct udevice_id ti_qspi_ids[] = {
@@ -646,6 +497,4 @@
.ofdata_to_platdata = ti_qspi_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct ti_qspi_priv),
.probe = ti_qspi_probe,
- .child_pre_probe = ti_qspi_child_pre_probe,
};
-#endif /* CONFIG_DM_SPI */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 5a60806..37d058e 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -120,12 +120,6 @@
#define CONFIG_ENV_OFFSET_REDUND 0x120000
#endif
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_SEL_GPIO 48
-#define CONFIG_QSPI_QUAD_SUPPORT
-#define CONFIG_TI_EDMA3
-
#ifndef CONFIG_SPL_BUILD
#include <environment/ti/dfu.h>
#include <environment/ti/mmc.h>
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 4899984..c14b010 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -92,11 +92,6 @@
#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
/* SPI SPL */
-#define CONFIG_TI_EDMA3
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_QUAD_SUPPORT
-
#endif /* __CONFIG_AM57XX_EVM_H */
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index ffe4a44..e4e37e5 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -53,9 +53,6 @@
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_AM437X_USB2PHY2_HOST
-/* SPI Flash support */
-#define CONFIG_TI_SPI_MMAP
-
/* Power */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 7441f4a..f6be659 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -72,10 +72,6 @@
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_PHY_TI
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_QUAD_SUPPORT
-
/*
* Default to using SPI for environment, etc.
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
@@ -98,7 +94,6 @@
#endif
/* SPI SPL */
-#define CONFIG_TI_EDMA3
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
#define CONFIG_SUPPORT_EMMC_BOOT
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 7d1ea24..5092c3f 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1555,8 +1555,6 @@
CONFIG_QEMU_MIPS
CONFIG_QIXIS_I2C_ACCESS
CONFIG_QSPI
-CONFIG_QSPI_QUAD_SUPPORT
-CONFIG_QSPI_SEL_GPIO
CONFIG_QUOTA
CONFIG_R7780MP
CONFIG_R8A66597_BASE_ADDR
@@ -4399,7 +4397,6 @@
CONFIG_TIMESTAMP
CONFIG_TIZEN
CONFIG_TI_KSNAV
-CONFIG_TI_SPI_MMAP
CONFIG_TMU_TIMER
CONFIG_TPL_PAD_TO
CONFIG_TPM_TIS_BASE_ADDRESS