PowerPC: keymile: Add support for kmcent2 board
Add basic support for the Hitachi Power Grids kmcent2 board, based
on the NXP QorIQ T1040 SoC.
Signed-off-by: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
[Fixed blank line at EOF errors]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/arch/powerpc/dts/kmcent2-u-boot.dtsi b/arch/powerpc/dts/kmcent2-u-boot.dtsi
new file mode 100644
index 0000000..ab76a9f
--- /dev/null
+++ b/arch/powerpc/dts/kmcent2-u-boot.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2021 Niel Fourie <lusus@denx.de>
+ */
+
+#include <config.h>
+
+/ {
+
+ aliases {
+ spi0 = "/soc@ffe000000/spi@110000";
+ i2c0 = "/soc@ffe000000/i2c@118000";
+ i2c1 = "/soc@ffe000000/i2c@118000/mux@70/i2c@0";
+ i2c2 = "/soc@ffe000000/i2c@118000/mux@70/i2c@1";
+ i2c3 = "/soc@ffe000000/i2c@118000/mux@70/i2c@7";
+ i2c4 = "/soc@ffe000000/i2c@118100";
+ /delete-property/ pci1;
+ /delete-property/ pci2;
+ /delete-property/ pci3;
+ };
+
+ chosen {
+ stdout-path = "/soc@ffe000000/serial@11c500";
+ };
+
+ soc@ffe000000 {
+ u-boot,dm-pre-reloc;
+ spi@110000 {
+ /* This documents where km_fpgacfg should be appear */
+ fpga@0 {
+ compatible = "keymile,fpga-conf";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ sdhc@114000 {
+ status = "okay";
+ };
+
+ i2c@118000 {
+ u-boot,dm-pre-reloc;
+ mux@70 {
+ i2c@1 { /* IVM bus */
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ serial@11c500 {
+ u-boot,dm-pre-reloc;
+ clock-frequency = <200000000>;
+ };
+
+ fman@400000 {
+ ethernet@e0000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-connection-type = "rgmii-id";
+ };
+ };
+
+ };
+
+ pcie@ffe240000 {
+ compatible = "fsl,pcie-t104x";
+ law_trgt_if = <0>;
+ };
+
+ binman {
+ filename = "u-boot-with-dtb.bin";
+ skip-at-start = <CONFIG_SYS_TEXT_BASE>;
+ sort-by-offset;
+ pad-byte = <0xff>;
+ size = <CONFIG_SYS_MONITOR_LEN>;
+
+ u-boot-with-ucode-ptr {
+ offset = <CONFIG_SYS_TEXT_BASE>;
+ optional-ucode;
+ };
+
+ u-boot-dtb-with-ucode {
+ align = <256>;
+ };
+ powerpc-mpc85xx-bootpg-resetvec {
+ offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>;
+ };
+ };
+};