powerpc/c29xpcie: Getting DDR SPD image from 16-bit sub-address EEPROM
Currently, there is only one EEPROM on c29xpcie board which is AT24C1024.
We program the SPD data at beginning of the AT24C1024.But the AT24C1024
has a 16-bit sub-address mode. This patch is tomake it work when getting
SPD in a 16-bit sub-address EEPROM.
Signed-off-by: Po Liu <Po.Liu@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c
index 968655c..7c915b0 100644
--- a/board/freescale/c29xpcie/ddr.c
+++ b/board/freescale/c29xpcie/ddr.c
@@ -5,6 +5,7 @@
*/
#include <common.h>
+#include <i2c.h>
#include <asm/fsl_law.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
@@ -92,3 +93,15 @@
popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
}
}
+
+void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
+{
+ int ret = i2c_read(i2c_address, 0, 2, (uint8_t *)spd,
+ sizeof(generic_spd_eeprom_t));
+
+ if (ret) {
+ printf("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ memset(spd, 0, sizeof(generic_spd_eeprom_t));
+ }
+}