mpc85xx boards: initdram() cleanup/bugfix
Correct initdram to use phys_size_t to represent the size of
dram; instead of changing this all over the place, and correcting
all the other random errors I've noticed, create a
common initdram that is used by all non-corenet 85xx parts. Most
of the initdram() functions were identical, with 2 common differences:
1) DDR tlbs for the fixed_sdram case were set up in initdram() on
some boards, and were part of the tlb_table on others. I have
changed them all over to the initdram() method - we shouldn't
be accessing dram before this point so they don't need to be
done sooner, and this seems cleaner.
2) Parts that require the DDR11 erratum workaround had different
implementations - I have adopted the version from the Freescale
errata document. It also looks like some of the versions were
buggy, and, depending on timing, could have resulted in the
DDR controller being disabled. This seems bad.
The xpedite boards had a common/fsl_8xxx_ddr.c; with this
change only the 517 board uses this so I have moved the ddr code
into that board's directory in xpedite517x.c
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index bd80cb7..58dc564 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -42,8 +42,6 @@
#include "../common/sgmii_riser.h"
-phys_size_t fixed_sdram(void);
-
int board_early_init_f (void)
{
#ifdef CONFIG_MMC
@@ -98,25 +96,6 @@
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- phys_size_t dram_size = 0;
-
- puts("Initializing....");
-
-#ifdef CONFIG_SPD_EEPROM
- dram_size = fsl_ddr_sdram();
-#else
- dram_size = fixed_sdram();
-#endif
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- puts(" DDR: ");
- return dram_size;
-}
-
#if !defined(CONFIG_SPD_EEPROM)
/*
* Fixed sdram init -- doesn't use serial presence detect.
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index d354a26..deab811 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -39,8 +39,6 @@
#endif
void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
int checkboard (void)
{
@@ -61,54 +59,6 @@
return 0;
}
-
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- {
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint temp_ddrdll = 0;
-
- /*
- * Work around to stabilize DDR DLL
- */
- temp_ddrdll = gur->ddrdllcr;
- gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
- asm("sync;isync;msync");
- }
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
- dram_size *= 0x100000;
-#else
- dram_size = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
-
- /*
- * Initialize SDRAM.
- */
- sdram_init();
-
- puts(" DDR: ");
- return dram_size;
-}
-
-
/*
* Initialize Local Bus
*/
@@ -232,7 +182,7 @@
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
{
#ifndef CONFIG_SYS_RAMBOOT
volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
index a9925d5..adcc0ad 100644
--- a/board/freescale/mpc8540ads/tlb.c
+++ b/board/freescale/mpc8540ads/tlb.c
@@ -106,25 +106,6 @@
SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 7, BOOKE_PAGESZ_16K, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
- /*
- * TLB 8, 9: 128M DDR
- * 0x00000000 64M DDR System memory
- * 0x04000000 64M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
-#error("Update the number of table entries in tlb1_entry")
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 8, BOOKE_PAGESZ_64M, 1),
-
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 9, BOOKE_PAGESZ_64M, 1),
-#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 59ec604..59df2bd 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -42,7 +42,6 @@
#endif
void local_bus_init(void);
-void sdram_init(void);
/*
* I/O Port configuration table
@@ -242,48 +241,6 @@
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- {
- /*
- * Work around to stabilize DDR DLL MSYNC_IN.
- * Errata DDR9 seems to have been fixed.
- * This is now the workaround for Errata DDR11:
- * Override DLL = 1, Course Adj = 1, Tap Select = 0
- */
-
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- gur->ddrdllcr = 0x81000000;
- asm("sync;isync;msync");
- udelay(200);
- }
-#endif
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
- /*
- * SDRAM Initialization
- */
- sdram_init();
-
- puts(" DDR: ");
- return dram_size;
-}
-
/*
* Initialize Local Bus
*/
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 2b6900c..caea2f4 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -68,23 +68,6 @@
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
- dram_size = fsl_ddr_sdram();
-
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
- dram_size *= 0x100000;
-
- puts(" DDR: ");
- return dram_size;
-}
-
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
#endif
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index ebeb897..a4a35fa 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -42,7 +42,6 @@
DECLARE_GLOBAL_DATA_PTR;
void local_bus_init(void);
-void sdram_init(void);
int checkboard (void)
{
@@ -75,43 +74,6 @@
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- {
- /*
- * Work around to stabilize DDR DLL MSYNC_IN.
- * Errata DDR9 seems to have been fixed.
- * This is now the workaround for Errata DDR11:
- * Override DLL = 1, Course Adj = 1, Tap Select = 0
- */
-
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- gur->ddrdllcr = 0x81000000;
- asm("sync;isync;msync");
- udelay(200);
- }
-#endif
-
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- /*
- * SDRAM Initialization
- */
- sdram_init();
-
- puts(" DDR: ");
- return dram_size;
-}
-
/*
* Initialize Local Bus
*/
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index edaba26..5fe7f13 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -40,7 +40,6 @@
#endif
void local_bus_init(void);
-void sdram_init(void);
/*
* I/O Port configuration table
@@ -240,50 +239,6 @@
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- {
- /*
- * Work around to stabilize DDR DLL MSYNC_IN.
- * Errata DDR9 seems to have been fixed.
- * This is now the workaround for Errata DDR11:
- * Override DLL = 1, Course Adj = 1, Tap Select = 0
- */
-
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- gur->ddrdllcr = 0x81000000;
- asm("sync;isync;msync");
- udelay(200);
- }
-#endif
-
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
-
- /*
- * SDRAM Initialization
- */
- sdram_init();
-
- puts(" DDR: ");
- return dram_size;
-}
-
/*
* Initialize Local Bus
*/
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 2ae0459..49701ef 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -44,8 +44,6 @@
void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
/*
@@ -266,54 +264,6 @@
return 0;
}
-
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- {
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint temp_ddrdll = 0;
-
- /*
- * Work around to stabilize DDR DLL
- */
- temp_ddrdll = gur->ddrdllcr;
- gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
- asm("sync;isync;msync");
- }
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
- dram_size *= 0x100000;
-#else
- dram_size = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
-
- /*
- * Initialize SDRAM.
- */
- sdram_init();
-
- puts(" DDR: ");
- return dram_size;
-}
-
-
/*
* Initialize Local Bus
*/
@@ -437,7 +387,7 @@
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
{
#ifndef CONFIG_SYS_RAMBOOT
volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c
index a9925d5..adcc0ad 100644
--- a/board/freescale/mpc8560ads/tlb.c
+++ b/board/freescale/mpc8560ads/tlb.c
@@ -106,25 +106,6 @@
SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 7, BOOKE_PAGESZ_16K, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
- /*
- * TLB 8, 9: 128M DDR
- * 0x00000000 64M DDR System memory
- * 0x04000000 64M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
-#error("Update the number of table entries in tlb1_entry")
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 8, BOOKE_PAGESZ_64M, 1),
-
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 9, BOOKE_PAGESZ_64M, 1),
-#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 71cfbf0..85885fc 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -101,7 +101,6 @@
};
void local_bus_init(void);
-void sdram_init(void);
int board_early_init_f (void)
{
@@ -138,43 +137,6 @@
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- {
- /*
- * Work around to stabilize DDR DLL MSYNC_IN.
- * Errata DDR9 seems to have been fixed.
- * This is now the workaround for Errata DDR11:
- * Override DLL = 1, Course Adj = 1, Tap Select = 0
- */
-
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- gur->ddrdllcr = 0x81000000;
- asm("sync;isync;msync");
- udelay(200);
- }
-#endif
-
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- /*
- * SDRAM Initialization
- */
- sdram_init();
-
- puts(" DDR: ");
- return dram_size;
-}
-
/*
* Initialize Local Bus
*/
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 9700b8c..07db16a 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -45,8 +45,6 @@
#include "../common/pq-mds-pib.h"
#endif
-phys_size_t fixed_sdram(void);
-
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* QE_MUX_MDC */
{2, 31, 1, 0, 1}, /* QE_MUX_MDC */
@@ -245,40 +243,6 @@
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- /*
- * Work around to stabilize DDR DLL MSYNC_IN.
- * Errata DDR9 seems to have been fixed.
- * This is now the workaround for Errata DDR11:
- * Override DLL = 1, Course Adj = 1, Tap Select = 0
- */
- volatile ccsr_gur_t *gur =
- (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- out_be32(&gur->ddrdllcr, 0x81000000);
- udelay(200);
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
- dram_size = fsl_ddr_sdram();
-#else
- dram_size = fixed_sdram();
-#endif
-
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- puts(" DDR: ");
- return dram_size;
-}
-
#if !defined(CONFIG_SPD_EEPROM)
phys_size_t fixed_sdram(void)
{
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index c217c27..c69dfe4 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -39,8 +39,6 @@
#include "../common/sgmii_riser.h"
-long int fixed_sdram(void);
-
int checkboard (void)
{
u8 vboot;
@@ -74,23 +72,6 @@
return 0;
}
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size = 0;
-
- puts("Initializing....");
-
-#ifdef CONFIG_SPD_EEPROM
- dram_size = fsl_ddr_sdram();
-#else
- dram_size = fixed_sdram();
-#endif
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- puts(" DDR: ");
- return dram_size;
-}
#if !defined(CONFIG_SPD_EEPROM)
/*
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 7cb549b..e3e8300 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -76,19 +76,6 @@
return 0;
}
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size = 0;
-
- puts("Initializing....\n");
-
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000) * 0x100000;
-
- puts(" DDR: ");
- return dram_size;
-}
-
#define CONFIG_TFP410_I2C_ADDR 0x38
/* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */
diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c
index 15b46b0..e54fde2 100644
--- a/board/freescale/p1_p2_rdb/ddr.c
+++ b/board/freescale/p1_p2_rdb/ddr.c
@@ -239,19 +239,6 @@
fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
+ set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1);
return ddr_size;
}
-
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size = 0;
-
- dram_size = fixed_sdram();
- set_ddr_laws(0, dram_size, LAW_TRGT_IF_DDR_1);
-
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- puts("DDR: ");
- return dram_size;
-}
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 07b0801..40589da 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -44,8 +44,6 @@
DECLARE_GLOBAL_DATA_PTR;
-phys_size_t fixed_sdram(void);
-
int checkboard(void)
{
u8 sw;
@@ -70,31 +68,6 @@
return 0;
}
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size = 0;
-
- puts("Initializing....");
-
-#ifdef CONFIG_DDR_SPD
- dram_size = fsl_ddr_sdram();
-#else
- dram_size = fixed_sdram();
-
- if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
- dram_size,
- LAW_TRGT_IF_DDR) < 0) {
- printf("ERROR setting Local Access Windows for DDR\n");
- return 0;
- };
-#endif
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- puts(" DDR: ");
- return dram_size;
-}
-
#if !defined(CONFIG_DDR_SPD)
/*
* Fixed sdram init -- doesn't use serial presence detect.
@@ -170,6 +143,13 @@
udelay(500);
#endif
+ if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE * 1024 * 1024,
+ LAW_TRGT_IF_DDR) < 0) {
+ printf("ERROR setting Local Access Windows for DDR\n");
+ return 0;
+ };
+
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
}
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 06c1eea..1bce6fa 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -43,8 +43,6 @@
DECLARE_GLOBAL_DATA_PTR;
void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram (void);
int board_early_init_f (void)
{
@@ -69,47 +67,6 @@
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- {
- /*
- * Work around to stabilize DDR DLL MSYNC_IN.
- * Errata DDR9 seems to have been fixed.
- * This is now the workaround for Errata DDR11:
- * Override DLL = 1, Course Adj = 1, Tap Select = 0
- */
-
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- out_be32(&gur->ddrdllcr, 0x81000000);
- asm("sync;isync;msync");
- udelay(200);
- }
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-#else
- dram_size = fixed_sdram ();
-#endif
-
- /*
- * SDRAM Initialization
- */
- sdram_init();
-
- puts(" DDR: ");
- return dram_size;
-}
-
/*
* Initialize Local Bus
*/
@@ -268,7 +225,7 @@
* fixed_sdram init -- doesn't use serial presence detect.
* assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed.
************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
{
volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c
index 38bdeb3..bb4c052 100644
--- a/board/sbc8548/tlb.c
+++ b/board/sbc8548/tlb.c
@@ -65,44 +65,34 @@
0, 1, BOOKE_PAGESZ_1G, 1),
/*
- * TLB 2: 256M Cacheable, non-guarded
- * 0x0 256M DDR SDRAM
- */
-#if !defined(CONFIG_SPD_EEPROM)
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-#endif
-
- /*
- * TLB 3: 64M Non-cacheable, guarded
+ * TLB 2: 64M Non-cacheable, guarded
* 0xe0000000 1M CCSRBAR
* 0xe2000000 8M PCI1 IO
* 0xe2800000 8M PCIe IO
*/
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 3, BOOKE_PAGESZ_64M, 1),
+ 0, 2, BOOKE_PAGESZ_64M, 1),
/*
- * TLB 4: 64M Cacheable, non-guarded
+ * TLB 3: 64M Cacheable, non-guarded
* 0xf0000000 64M LBC SDRAM First half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 4, BOOKE_PAGESZ_64M, 1),
+ 0, 3, BOOKE_PAGESZ_64M, 1),
/*
- * TLB 5: 64M Cacheable, non-guarded
+ * TLB 4: 64M Cacheable, non-guarded
* 0xf4000000 64M LBC SDRAM Second half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 5, BOOKE_PAGESZ_64M, 1),
+ 0, 4, BOOKE_PAGESZ_64M, 1),
/*
- * TLB 6: 16M Cacheable, non-guarded
+ * TLB 5: 16M Cacheable, non-guarded
* 0xf8000000 1M 7-segment LED display
* 0xf8100000 1M User switches
* 0xf8300000 1M Board revision
@@ -110,24 +100,24 @@
*/
SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_16M, 1),
+ 0, 5, BOOKE_PAGESZ_16M, 1),
/*
- * TLB 7: 4M Non-cacheable, guarded
+ * TLB 6: 4M Non-cacheable, guarded
* 0xfb800000 4M 1st 4MB block of 64MB user FLASH
*/
SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 7, BOOKE_PAGESZ_4M, 1),
+ 0, 6, BOOKE_PAGESZ_4M, 1),
/*
- * TLB 8: 4M Non-cacheable, guarded
+ * TLB 7: 4M Non-cacheable, guarded
* 0xfbc00000 4M 2nd 4MB block of 64MB user FLASH
*/
SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000,
CONFIG_SYS_ALT_FLASH + 0x400000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 8, BOOKE_PAGESZ_4M, 1),
+ 0, 7, BOOKE_PAGESZ_4M, 1),
};
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index 7bf8179..c5fe92e 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -38,8 +38,6 @@
#include <libfdt.h>
#include <fdt_support.h>
-long int fixed_sdram (void);
-
/*
* I/O Port configuration table
*
@@ -263,95 +261,6 @@
}
-phys_size_t initdram (int board_type)
-{
- long dram_size = 0;
-
-#if 0
-#if !defined(CONFIG_RAM_AS_FLASH)
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- sys_info_t sysinfo;
- uint temp_lbcdll = 0;
-#endif
-#endif /* 0 */
-#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#endif
-#if defined(CONFIG_DDR_DLL)
- uint temp_ddrdll = 0;
-
- /* Work around to stabilize DDR DLL */
- temp_ddrdll = gur->ddrdllcr;
- gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
- asm("sync;isync;msync");
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-#else
- dram_size = fixed_sdram ();
-#endif
-
-#if 0
-#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
- get_sys_info(&sysinfo);
- /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
- if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
- lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
- } else {
-#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
- lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
-#endif
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;
- udelay(200);
- temp_lbcdll = gur->lbcdllcr;
- gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
- asm("sync;isync;msync");
- }
- set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */
- set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
- lbc->lbcr = CONFIG_SYS_LBC_LBCR;
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
- asm("sync");
- (unsigned int) * (ulong *)0 = 0x000000ff;
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
- asm("sync");
- (unsigned int) * (ulong *)0 = 0x000000ff;
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
- asm("sync");
- (unsigned int) * (ulong *)0 = 0x000000ff;
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
- asm("sync");
- (unsigned int) * (ulong *)0 = 0x000000ff;
- lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
- asm("sync");
- lbc->lsrt = CONFIG_SYS_LBC_LSRT;
- asm("sync");
- lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
- asm("sync");
-#endif
-#endif
-
-#if defined(CONFIG_DDR_ECC)
- {
- /* Initialize all of memory for ECC, then
- * enable errors */
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
- dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
- /* Enable errors for ECC */
- ddr->err_disable = 0x00000000;
- asm("sync;isync;msync");
- }
-#endif
-
- return dram_size;
-}
-
-
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
{
@@ -390,7 +299,7 @@
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
{
#define CONFIG_SYS_DDR_CONTROL 0xc2000000
diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c
index ef897b2..c8235f4 100644
--- a/board/socrates/sdram.c
+++ b/board/socrates/sdram.c
@@ -39,7 +39,7 @@
* so this should be extended for other future boards
* using this routine!
*/
-long int fixed_sdram(void)
+phys_size_t fixed_sdram(void)
{
volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
@@ -77,19 +77,6 @@
}
#endif
-phys_size_t initdram (int board_type)
-{
- long dram_size = 0;
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-#else
- dram_size = fixed_sdram();
-#endif
- return dram_size;
-}
-
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
{
diff --git a/board/stx/stxgp3/stxgp3.c b/board/stx/stxgp3/stxgp3.c
index 1ed340e..de22bf5 100644
--- a/board/stx/stxgp3/stxgp3.c
+++ b/board/stx/stxgp3/stxgp3.c
@@ -40,8 +40,6 @@
#include <spd_sdram.h>
#include <miiphy.h>
-long int fixed_sdram (void);
-
/*
* I/O Port configuration table
*
@@ -277,36 +275,6 @@
next_led_update += (get_tbclk() / 4);
}
-phys_size_t
-initdram (int board_type)
-{
- long dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
- {
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint temp_ddrdll = 0;
-
- /* Work around to stabilize DDR DLL */
- temp_ddrdll = gur->ddrdllcr;
- gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
- asm("sync;isync;msync");
- }
-#endif
-
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC)
- /* Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
-
- return dram_size;
-}
-
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c
index 6cd28a3..83ffcd2 100644
--- a/board/stx/stxssa/stxssa.c
+++ b/board/stx/stxssa/stxssa.c
@@ -41,8 +41,6 @@
#include <miiphy.h>
#include <netdev.h>
-long int fixed_sdram (void);
-
/*
* I/O Port configuration table
*
@@ -294,37 +292,6 @@
next_led_update += (get_tbclk() / 4);
}
-phys_size_t
-initdram (int board_type)
-{
- long dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
- {
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint temp_ddrdll = 0;
-
- /* Work around to stabilize DDR DLL */
- temp_ddrdll = gur->ddrdllcr;
- gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
- asm("sync;isync;msync");
- }
-#endif
-
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC)
- /* Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
-
- return dram_size;
-}
-
-
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
{
diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c
index 260cd1c..b2d3185 100644
--- a/board/tqc/tqm85xx/sdram.c
+++ b/board/tqc/tqm85xx/sdram.c
@@ -394,43 +394,6 @@
return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
}
-phys_size_t initdram (int board_type)
-{
- phys_size_t dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
- /*
- * This DLL-Override only used on TQM8540 and TQM8560
- */
- {
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int i, x;
-
- x = 10;
-
- /*
- * Work around to stabilize DDR DLL
- */
- gur->ddrdllcr = 0x81000000;
- asm ("sync; isync; msync");
- udelay (200);
- while (gur->ddrdllcr != 0x81000100) {
- gur->devdisr = gur->devdisr | 0x00010000;
- asm ("sync; isync; msync");
- for (i = 0; i < x; i++)
- ;
- gur->devdisr = gur->devdisr & 0xfff7ffff;
- asm ("sync; isync; msync");
- x++;
- }
- }
-#endif
-
- dram_size = fixed_sdram();
-
- return dram_size;
-}
-
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
{
diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c
index 75dd348..f9f8cc9 100644
--- a/board/tqc/tqm85xx/tlb.c
+++ b/board/tqc/tqm85xx/tlb.c
@@ -120,36 +120,6 @@
SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
0, 6, BOOKE_PAGESZ_64M, 1),
-
-#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE)
- /*
- * TLB 7+8: 2G DDR, cache enabled
- * 0x00000000 2G DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 7, BOOKE_PAGESZ_1G, 1),
-
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
- CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 8, BOOKE_PAGESZ_1G, 1),
-#else
- /*
- * TLB 7+8: 512M DDR, cache disabled (needed for memory test)
- * 0x00000000 512M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 7, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 8, BOOKE_PAGESZ_256M, 1),
-#endif
#ifdef CONFIG_PCIE1
/*
* TLB 9: 16M Non-cacheable, guarded
@@ -228,23 +198,6 @@
SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
0, 7, BOOKE_PAGESZ_64M, 1),
-
- /*
- * TLB 8+9: 512M DDR, cache disabled (needed for memory test)
- * 0x00000000 512M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 8, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 9, BOOKE_PAGESZ_256M, 1),
-
#ifdef CONFIG_PCIE1
/*
* TLB 10: 16M Non-cacheable, guarded
diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile
index 7604f62..39d105f 100644
--- a/board/xes/common/Makefile
+++ b/board/xes/common/Makefile
@@ -33,8 +33,6 @@
COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o
COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o
COBJS-$(CONFIG_P2020) += fsl_8xxx_clk.o
-COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o
-COBJS-$(CONFIG_FSL_DDR3) += fsl_8xxx_ddr.o
COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o
COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o
COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o
diff --git a/board/xes/common/fsl_8xxx_ddr.c b/board/xes/common/fsl_8xxx_ddr.c
deleted file mode 100644
index 81ee70d..0000000
--- a/board/xes/common/fsl_8xxx_ddr.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright 2008 Extreme Engineering Solutions, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size = fsl_ddr_sdram();
-
-#ifdef CONFIG_MPC85xx
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /* Initialize and enable DDR ECC */
- ddr_enable_ecc(dram_size);
-#endif
-
- return dram_size;
-}
diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c
index 0f7fa6c..572a908 100644
--- a/board/xes/xpedite517x/xpedite517x.c
+++ b/board/xes/xpedite517x/xpedite517x.c
@@ -22,6 +22,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
#include <asm/mmu.h>
#include <asm/io.h>
#include <fdt_support.h>
@@ -71,6 +72,18 @@
return 0;
}
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size = fsl_ddr_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /* Initialize and enable DDR ECC */
+ ddr_enable_ecc(dram_size);
+#endif
+
+ return dram_size;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{