S5PC2XX: Rename S5pc2XX to exynos
As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15
based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15
based SoC's will be sub-classified as Exynos4 and Exynos5 respectively.
In order to better adapt and reuse code across various upcoming Samsung Exynos
based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in
this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix
are renamed as exynos4/EXYNOS4.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
index ddca1e2..0eebbfc 100644
--- a/board/samsung/origen/lowlevel_init.S
+++ b/board/samsung/origen/lowlevel_init.S
@@ -1,5 +1,5 @@
/*
- * Lowlevel setup for ORIGEN board based on S5PV310
+ * Lowlevel setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -43,11 +43,11 @@
/* r5 has always zero */
mov r5, #0
- ldr r7, =S5PC210_GPIO_PART1_BASE
- ldr r6, =S5PC210_GPIO_PART2_BASE
+ ldr r7, =EXYNOS4_GPIO_PART1_BASE
+ ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* check reset status */
- ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET)
+ ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET)
ldr r1, [r0]
/* AFTR wakeup reset */
@@ -97,9 +97,9 @@
exit_wakeup:
/* Load return address and jump to kernel */
- ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET)
+ ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET)
- /* r1 = physical address of s5pc210_cpu_resume function */
+ /* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
@@ -113,7 +113,7 @@
*/
system_clock_init:
push {lr}
- ldr r0, =S5PC210_CLOCK_BASE
+ ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =CLK_SRC_CPU_VAL
@@ -290,13 +290,13 @@
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
- ldr r1, =S5PC210_GPIO_A0_CON_VAL
- str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET]
- ldr r1, =S5PC210_GPIO_A1_CON_VAL
- str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET]
+ ldr r1, =EXYNOS4_GPIO_A0_CON_VAL
+ str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET]
+ ldr r1, =EXYNOS4_GPIO_A1_CON_VAL
+ str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET]
- ldr r0, =S5PC210_UART_BASE
- add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+ ldr r0, =EXYNOS4_UART_BASE
+ add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
ldr r1, =ULCON_VAL
str r1, [r0, #ULCON_OFFSET]
diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S
index a798848..b49b193 100644
--- a/board/samsung/origen/mem_setup.S
+++ b/board/samsung/origen/mem_setup.S
@@ -1,5 +1,5 @@
/*
- * Memory setup for ORIGEN board based on S5PV310
+ * Memory setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -38,7 +38,7 @@
str r1, [r0]
#ifdef SET_MIU
- ldr r0, =S5PC210_MIU_BASE
+ ldr r0, =EXYNOS4_MIU_BASE
/* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
ldr r1, =0x20001507
str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
@@ -48,7 +48,7 @@
str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
#endif
/* DREX0 */
- ldr r0, =S5PC210_DMC0_BASE
+ ldr r0, =EXYNOS4_DMC0_BASE
/*
* DLL Parameter Setting:
@@ -229,7 +229,7 @@
bne 8b
/* DREX1 */
- ldr r0, =S5PC210_DMC1_BASE @0x10410000
+ ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
/*
* DLL Parameter Setting:
@@ -410,11 +410,11 @@
bne 8b
/* turn on DREX0, DREX1 */
- ldr r0, =S5PC210_DMC0_BASE
+ ldr r0, =EXYNOS4_DMC0_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #DMC_CONCONTROL]
- ldr r0, =S5PC210_DMC1_BASE
+ ldr r0, =EXYNOS4_DMC1_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #DMC_CONCONTROL]
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
index 8882646..638e7b1 100644
--- a/board/samsung/origen/origen.c
+++ b/board/samsung/origen/origen.c
@@ -27,13 +27,13 @@
#include <asm/arch/mmc.h>
DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4_gpio_part1 *gpio1;
+struct exynos4_gpio_part2 *gpio2;
int board_init(void)
{
- gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
- gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+ gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
return 0;
diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h
index 63d85d8..d949ad2 100644
--- a/board/samsung/origen/origen_setup.h
+++ b/board/samsung/origen/origen_setup.h
@@ -98,8 +98,8 @@
#define INFORM1_OFFSET 0x804
/* GPIO Offsets for UART: GPIO Contol Register */
-#define S5PC210_GPIO_A0_CON_OFFSET 0x00
-#define S5PC210_GPIO_A1_CON_OFFSET 0x20
+#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00
+#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20
/* UART Register offsets */
#define ULCON_OFFSET 0x00
@@ -416,8 +416,8 @@
* UART GPIO_A0/GPIO_A1 Control Register Value
* 0x2: UART Function
*/
-#define S5PC210_GPIO_A0_CON_VAL 0x22222222
-#define S5PC210_GPIO_A1_CON_VAL 0x222222
+#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222
+#define EXYNOS4_GPIO_A1_CON_VAL 0x222222
/* ULCON: UART Line Control Value 8N1 */
#define WORD_LEN_5_BIT 0x00
diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S
index 58b737b..7a1ea98 100644
--- a/board/samsung/smdkv310/lowlevel_init.S
+++ b/board/samsung/smdkv310/lowlevel_init.S
@@ -1,5 +1,5 @@
/*
- * Lowlevel setup for SMDKV310 board based on S5PC210
+ * Lowlevel setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -45,11 +45,11 @@
/* r5 has always zero */
mov r5, #0
- ldr r7, =S5PC210_GPIO_PART1_BASE
- ldr r6, =S5PC210_GPIO_PART2_BASE
+ ldr r7, =EXYNOS4_GPIO_PART1_BASE
+ ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* check reset status */
- ldr r0, =(S5PC210_POWER_BASE + 0x81C) @ INFORM7
+ ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7
ldr r1, [r0]
/* AFTR wakeup reset */
@@ -95,9 +95,9 @@
exit_wakeup:
/* Load return address and jump to kernel */
- ldr r0, =(S5PC210_POWER_BASE + 0x800) @ INFORM0
+ ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0
- /* r1 = physical address of s5pc210_cpu_resume function */
+ /* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
@@ -111,7 +111,7 @@
*/
system_clock_init:
push {lr}
- ldr r0, =S5PC210_CLOCK_BASE
+ ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =0x0101
@@ -388,12 +388,12 @@
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =0x22222222
- str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET
+ str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET
ldr r1, =0x00222222
- str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET
+ str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET
- ldr r0, =S5PC210_UART_BASE
- add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+ ldr r0, =EXYNOS4_UART_BASE
+ add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
ldr r1, =0x3C5
str r1, [r0, #0x4]
diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S
index 73aebe3..d3b6265 100644
--- a/board/samsung/smdkv310/mem_setup.S
+++ b/board/samsung/smdkv310/mem_setup.S
@@ -1,5 +1,5 @@
/*
- * Memory setup for SMDKV310 board based on S5PC210
+ * Memory setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -54,7 +54,7 @@
str r1, [r0]
#ifdef SET_MIU
- ldr r0, =S5PC210_MIU_BASE @0x10600000
+ ldr r0, =EXYNOS4_MIU_BASE @0x10600000
#ifdef CONFIG_MIU_1BIT_INTERLEAVED
ldr r1, =0x0000000c
str r1, [r0, #0x400] @MIU_INTLV_CONFIG
@@ -89,7 +89,7 @@
#endif
#endif
/* DREX0 */
- ldr r0, =S5PC210_DMC0_BASE @0x10400000
+ ldr r0, =EXYNOS4_DMC0_BASE @0x10400000
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
@@ -221,7 +221,7 @@
bne 8b
/* DREX1 */
- ldr r0, =S5PC210_DMC1_BASE @0x10410000
+ ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index d9caca7..81ac8f6 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -29,8 +29,8 @@
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4_gpio_part1 *gpio1;
+struct exynos4_gpio_part2 *gpio2;
static void smc9115_pre_init(void)
{
@@ -52,8 +52,8 @@
int board_init(void)
{
- gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
- gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+ gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
smc9115_pre_init();
diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S
index 67635bb..dc7f69e 100644
--- a/board/samsung/universal_c210/lowlevel_init.S
+++ b/board/samsung/universal_c210/lowlevel_init.S
@@ -1,5 +1,5 @@
/*
- * Lowlevel setup for universal board based on S5PC210
+ * Lowlevel setup for universal board based on EXYNOS4210
*
* Copyright (C) 2010 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
@@ -43,11 +43,11 @@
/* r5 has always zero */
mov r5, #0
- ldr r7, =S5PC210_GPIO_PART1_BASE
- ldr r6, =S5PC210_GPIO_PART2_BASE
+ ldr r7, =EXYNOS4_GPIO_PART1_BASE
+ ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* System Timer */
- ldr r0, =S5PC210_SYSTIMER_BASE
+ ldr r0, =EXYNOS4_SYSTIMER_BASE
ldr r1, =0x5000
str r1, [r0, #0x0]
ldr r1, =0xffffffff
@@ -57,7 +57,7 @@
/* PMIC manual reset */
/* nPOWER: XEINT_23: GPX2[7] */
- add r0, r6, #0xC40 @ S5PC210_GPIO_X2_OFFSET
+ add r0, r6, #0xC40 @ EXYNOS4_GPIO_X2_OFFSET
ldr r1, [r0, #0x0]
bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit
orr r1, r1, #(0x1 << 28) @ Output
@@ -71,7 +71,7 @@
bl system_clock_init
/* Disable Watchdog */
- ldr r0, =S5PC210_WATCHDOG_BASE @0x10060000
+ ldr r0, =EXYNOS4_WATCHDOG_BASE @0x10060000
str r5, [r0]
/* UART */
@@ -99,12 +99,12 @@
*/
mov r0, r7
ldr r1, =0x22222222
- str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET
+ str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET
ldr r1, =0x00223322
- str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET
+ str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET
- /* UART_SEL GPY4[7] (part2) at S5PC210 */
- add r0, r6, #0x1A0 @ S5PC210_GPIO_Y4_OFFSET
+ /* UART_SEL GPY4[7] (part2) at EXYNOS4 */
+ add r0, r6, #0x1A0 @ EXYNOS4_GPIO_Y4_OFFSET
ldr r1, [r0, #0x0]
bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit
orr r1, r1, #(0x1 << 28)
@@ -125,7 +125,7 @@
nop
system_clock_init:
- ldr r0, =S5PC210_CLOCK_BASE
+ ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =0x0101
@@ -326,7 +326,7 @@
nop
system_power_init:
- ldr r0, =S5PC210_POWER_BASE @ 0x10020000
+ ldr r0, =EXYNOS4_POWER_BASE @ 0x10020000
ldr r2, =0x330C @ PS_HOLD_CONTROL
ldr r1, [r0, r2]
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index d767eaa..f9b8a76 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -31,8 +31,8 @@
DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4_gpio_part1 *gpio1;
+struct exynos4_gpio_part2 *gpio2;
unsigned int board_rev;
u32 get_board_rev(void)
@@ -49,8 +49,8 @@
int board_init(void)
{
- gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
- gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+ gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;