arm64: dts: meson: sync dt and bindings from v5.7-rc1
Sync the device tree and dt-bindings from Linux v5.7-rc1 8f3d9f354286
("Linux 5.7-rc1").
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/arch/arm/dts/meson-axg-s400.dts b/arch/arm/dts/meson-axg-s400.dts
index 4cd2d59..cb1360a 100644
--- a/arch/arm/dts/meson-axg-s400.dts
+++ b/arch/arm/dts/meson-axg-s400.dts
@@ -313,15 +313,15 @@
dai-tdm-slot-rx-mask-1 = <1 1>;
mclk-fs = <256>;
- codec@0 {
+ codec-0 {
sound-dai = <&lineout>;
};
- codec@1 {
+ codec-1 {
sound-dai = <&speaker_amp1>;
};
- codec@2 {
+ codec-2 {
sound-dai = <&linein>;
};
diff --git a/arch/arm/dts/meson-g12-common.dtsi b/arch/arm/dts/meson-g12-common.dtsi
index abe04f4..0882ea2 100644
--- a/arch/arm/dts/meson-g12-common.dtsi
+++ b/arch/arm/dts/meson-g12-common.dtsi
@@ -295,17 +295,9 @@
};
};
- emmc_pins: emmc {
+ emmc_ctrl_pins: emmc-ctrl {
mux-0 {
- groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7",
- "emmc_cmd";
+ groups = "emmc_cmd";
function = "emmc";
bias-pull-up;
drive-strength-microamp = <4000>;
@@ -319,6 +311,34 @@
};
};
+ emmc_data_4b_pins: emmc-data-4b {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_data_8b_pins: emmc-data-8b {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
emmc_ds_pins: emmc-ds {
mux {
groups = "emmc_nand_ds";
@@ -573,6 +593,17 @@
};
};
+ nor_pins: nor {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_cs";
+ function = "nor";
+ bias-disable;
+ };
+ };
+
pdm_din0_a_pins: pdm-din0-a {
mux {
groups = "pdm_din0_a";
@@ -957,6 +988,57 @@
};
};
+ spicc0_x_pins: spicc0-x {
+ mux {
+ groups = "spi0_mosi_x",
+ "spi0_miso_x",
+ "spi0_clk_x";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc0_ss0_x_pins: spicc0-ss0-x {
+ mux {
+ groups = "spi0_ss0_x";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc0_c_pins: spicc0-c {
+ mux {
+ groups = "spi0_mosi_c",
+ "spi0_miso_c",
+ "spi0_ss0_c",
+ "spi0_clk_c";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc1_pins: spicc1 {
+ mux {
+ groups = "spi1_mosi",
+ "spi1_miso",
+ "spi1_clk";
+ function = "spi1";
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ spicc1_ss0_pins: spicc1-ss0 {
+ mux {
+ groups = "spi1_ss0";
+ function = "spi1";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
tdm_a_din0_pins: tdm-a-din0 {
mux {
groups = "tdm_a_din0";
@@ -2051,6 +2133,39 @@
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
};
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x13000 0x0 0x44>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>,
+ <&clkc CLKID_SPICC0_SCLK>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x15000 0x0 0x44>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>,
+ <&clkc CLKID_SPICC1_SCLK>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spifc: spi@14000 {
+ compatible = "amlogic,meson-gxbb-spifc";
+ status = "disabled";
+ reg = <0x0 0x14000 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_CLK81>;
+ };
+
pwm_ef: pwm@19000 {
compatible = "amlogic,meson-g12a-ee-pwm";
reg = <0x0 0x19000 0x0 0x20>;
@@ -2220,6 +2335,7 @@
dr_mode = "host";
snps,dis_u2_susphy_quirk;
snps,quirk-frame-length-adjustment;
+ snps,parkmode-disable-ss-quirk;
};
};
diff --git a/arch/arm/dts/meson-g12.dtsi b/arch/arm/dts/meson-g12.dtsi
index 03054c4..55d3902 100644
--- a/arch/arm/dts/meson-g12.dtsi
+++ b/arch/arm/dts/meson-g12.dtsi
@@ -56,6 +56,7 @@
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
+ resets = <&clkc_audio AUD_RESET_PDM>;
status = "disabled";
};
diff --git a/arch/arm/dts/meson-g12a-sei510.dts b/arch/arm/dts/meson-g12a-sei510.dts
index 2ac9e3a..b00d046 100644
--- a/arch/arm/dts/meson-g12a-sei510.dts
+++ b/arch/arm/dts/meson-g12a-sei510.dts
@@ -269,7 +269,7 @@
dai-tdm-slot-tx-mask-3 = <1 1>;
mclk-fs = <256>;
- codec@0 {
+ codec {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
};
};
@@ -472,7 +472,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts
index 2a324f0..a26bfe7 100644
--- a/arch/arm/dts/meson-g12a-u200.dts
+++ b/arch/arm/dts/meson-g12a-u200.dts
@@ -271,7 +271,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi b/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
index 5548634..c33e85f 100644
--- a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm/dts/meson-g12b-khadas-vim3.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
+ model = "Khadas VIM3";
+
vddcpu_a: regulator-vddcpu-a {
/*
* MP8756GD Regulator.
@@ -48,7 +50,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-KHADAS-VIM3";
+ model = "G12B-KHADAS-VIM3";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dts b/arch/arm/dts/meson-g12b-odroid-n2.dts
index 0e54c1d..169ea28 100644
--- a/arch/arm/dts/meson-g12b-odroid-n2.dts
+++ b/arch/arm/dts/meson-g12b-odroid-n2.dts
@@ -208,7 +208,7 @@
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-ODROIDN2";
+ model = "G12B-ODROID-N2";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
@@ -435,7 +435,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
@@ -451,6 +451,27 @@
vqmmc-supply = <&flash_1v8>;
};
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+ status = "disabled";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ mx25u64: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&tdmif_b {
status = "okay";
};
diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
index 40db06e..03f79fe 100644
--- a/arch/arm/dts/meson-gx.dtsi
+++ b/arch/arm/dts/meson-gx.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -83,6 +84,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -92,6 +94,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
@@ -101,6 +104,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
@@ -110,6 +114,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
l2: l2-cache0 {
@@ -117,6 +122,53 @@
};
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ thermal-sensors = <&scpi_sensors 0>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ cpu_critical: cpu-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cpu_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts
index 6ded279..b46ef98 100644
--- a/arch/arm/dts/meson-gxbb-odroidc2.dts
+++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
@@ -248,6 +248,7 @@
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
+ linux,rc-map-name = "rc-odroid";
};
&gpio_ao {
diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi
index 43eb7d1..6ac678f 100644
--- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm/dts/meson-gxl-s905x-p212.dtsi
@@ -15,7 +15,6 @@
/ {
aliases {
serial0 = &uart_AO;
- serial1 = &uart_A;
ethernet0 = ðmac;
};
@@ -180,6 +179,14 @@
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
};
&uart_AO {
diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts b/arch/arm/dts/meson-gxm-khadas-vim2.dts
index f82f25c..27eeab7 100644
--- a/arch/arm/dts/meson-gxm-khadas-vim2.dts
+++ b/arch/arm/dts/meson-gxm-khadas-vim2.dts
@@ -8,7 +8,6 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
#include "meson-gxm.dtsi"
@@ -100,49 +99,6 @@
clock-names = "ext_clock";
};
- thermal-zones {
- cpu-thermal {
- polling-delay-passive = <250>; /* milliseconds */
- polling-delay = <1000>; /* milliseconds */
-
- thermal-sensors = <&scpi_sensors 0>;
-
- trips {
- cpu_alert0: cpu-alert0 {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_alert1: cpu-alert1 {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
- };
-
- map1 {
- trip = <&cpu_alert1>;
- cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
hdmi_5v: regulator-hdmi-5v {
compatible = "regulator-fixed";
@@ -198,36 +154,23 @@
hdmi-phandle = <&hdmi_tx>;
};
-&cpu0 {
- #cooling-cells = <2>;
-};
-&cpu1 {
- #cooling-cells = <2>;
-};
+&cpu_cooling_maps {
+ map0 {
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+ };
-&cpu2 {
- #cooling-cells = <2>;
-};
-
-&cpu3 {
- #cooling-cells = <2>;
-};
-
-&cpu4 {
- #cooling-cells = <2>;
-};
-
-&cpu5 {
- #cooling-cells = <2>;
-};
-
-&cpu6 {
- #cooling-cells = <2>;
-};
-
-&cpu7 {
- #cooling-cells = <2>;
+ map1 {
+ cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
};
ðmac {
@@ -327,7 +270,7 @@
#size-cells = <0>;
bus-width = <4>;
- max-frequency = <50000000>;
+ max-frequency = <60000000>;
non-removable;
disable-wp;
diff --git a/arch/arm/dts/meson-gxm.dtsi b/arch/arm/dts/meson-gxm.dtsi
index 5ff64a0..b6f89f1 100644
--- a/arch/arm/dts/meson-gxm.dtsi
+++ b/arch/arm/dts/meson-gxm.dtsi
@@ -49,6 +49,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu5: cpu@101 {
@@ -58,6 +59,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu6: cpu@102 {
@@ -67,6 +69,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu7: cpu@103 {
@@ -76,6 +79,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
};
};
@@ -124,6 +128,30 @@
compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
};
+&cpu_cooling_maps {
+ map0 {
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+};
+
&saradc {
compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
};
diff --git a/arch/arm/dts/meson-khadas-vim3.dtsi b/arch/arm/dts/meson-khadas-vim3.dtsi
index 90815fa..094ecf2 100644
--- a/arch/arm/dts/meson-khadas-vim3.dtsi
+++ b/arch/arm/dts/meson-khadas-vim3.dtsi
@@ -9,8 +9,6 @@
#include <dt-bindings/gpio/meson-g12a-gpio.h>
/ {
- model = "Khadas VIM3";
-
aliases {
serial0 = &uart_AO;
ethernet0 = ðmac;
@@ -312,7 +310,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
@@ -328,6 +326,26 @@
vqmmc-supply = <&emmc_1v8>;
};
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&spifc {
+ status = "disabled";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ w25q32: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128fw", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
diff --git a/arch/arm/dts/meson-sm1-khadas-vim3l.dts b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
index 1001b37..dbbf29a 100644
--- a/arch/arm/dts/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm/dts/meson-sm1-khadas-vim3l.dts
@@ -72,9 +72,10 @@
/*
* The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
* lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
- * an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving
- * these differential lines is shared between the USB3.0 controller
- * and the PCIe Controller, thus only a single controller can use it.
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
* If the MCU is configured to mux the PCIe/USB3.0 differential lines
* to the M.2 Key M slot, uncomment the following block to disable
* USB3.0 from the USB Complex and enable the PCIe controller.
@@ -82,7 +83,6 @@
* testing purposes, but instead rely on the firmware/bootloader to
* update these nodes accordingly if PCIe mode is selected by the MCU.
*/
-
/*
&pcie {
status = "okay";
diff --git a/arch/arm/dts/meson-sm1-sei610.dts b/arch/arm/dts/meson-sm1-sei610.dts
index a8bb3fa..dfb2438 100644
--- a/arch/arm/dts/meson-sm1-sei610.dts
+++ b/arch/arm/dts/meson-sm1-sei610.dts
@@ -518,7 +518,7 @@
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
@@ -593,6 +593,7 @@
compatible = "brcm,bcm43438-bt";
interrupt-parent = <&gpio_intc>;
interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
diff --git a/arch/arm/dts/meson-sm1.dtsi b/arch/arm/dts/meson-sm1.dtsi
index d847a3f..d4ec735 100644
--- a/arch/arm/dts/meson-sm1.dtsi
+++ b/arch/arm/dts/meson-sm1.dtsi
@@ -448,6 +448,7 @@
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
+ resets = <&clkc_audio AUD_RESET_PDM>;
status = "disabled";
};
};
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
index 0837c1a..b0d65d7 100644
--- a/include/dt-bindings/clock/g12a-clkc.h
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -143,5 +143,7 @@
#define CLKID_CPU1_CLK 253
#define CLKID_CPU2_CLK 254
#define CLKID_CPU3_CLK 255
+#define CLKID_SPICC0_SCLK 258
+#define CLKID_SPICC1_SCLK 261
#endif /* __G12A_CLKC_H */
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index db0763e..4073eb7 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -146,5 +146,6 @@
#define CLKID_CTS_VDAC 201
#define CLKID_HDMI_TX 202
#define CLKID_HDMI 205
+#define CLKID_ACODEC 206
#endif /* __GXBB_CLKC_H */