blob: 8c10897e565c9dffac8db8c4c55acaae23ef7602 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP LS1028A-QDS device tree fragment for RCW x3xx
*
* Copyright 2019-2021 NXP Semiconductors
*/
/*
* This setup is using a SCH-30841-R card with AQR412 quad PHY in slot 2. This
* is used for the 4 integrated ethernet switch in a multiplexes USXGMII set-up.
*
* We're including the normal .dsti file, not the reworked card .dtsi
* intentionally. We are using multiplexing of the 4 interfaces on a single
* lane and the rework doesn't actually disable any port. The rework is in fact
* needed, otherwise the PHY won't work with the default wiring on the QDS/PHY
* card.
*/
&slot2 {
#include "fsl-sch-30841.dtsi"
};
&enetc2 {
status = "okay";
};
&mscc_felix {
status = "okay";
};
&mscc_felix_port0 {
status = "okay";
phy-mode = "usxgmii";
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>;
};
&mscc_felix_port1 {
status = "okay";
phy-mode = "usxgmii";
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>;
};
&mscc_felix_port2 {
status = "okay";
phy-mode = "usxgmii";
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
};
&mscc_felix_port3 {
status = "okay";
phy-mode = "usxgmii";
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>;
};
&mscc_felix_port4 {
ethernet = <&enetc2>;
status = "okay";
};