zynqmp: gpio: Add support for zynqmp gpio modepin driver
ZynqMP modepin driver has capability to get/set/check status of modepin
gpios. These modepins are accessed using xilinx firmware. In modepin
register, [3:0] bits set direction, [7:4] bits read IO, [11:8] bits
set/clear IO.
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/2d802d98fd56d95d764532a33e844d935e0cebb3.1635505900.git.michal.simek@xilinx.com
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 40abc33..8192ce5 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -523,4 +523,13 @@
into a number of banks each with 32 GPIOs. The GPIOs for a device are
defined in the device tree with one node for each bank.
+config ZYNQMP_GPIO_MODEPIN
+ bool "ZynqMP gpio modepin"
+ depends on DM_GPIO
+ help
+ This config enables the ZynqMP gpio modepin driver. ZynqMP modepin
+ driver will set and get the status of PS_MODE pins. These modepins
+ are accessed using xilinx firmware. In modepin register, [3:0] bits
+ set direction, [7:4] bits read IO, [11:8] bits set/clear IO.
+
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 3c851b3..3eb77f5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -69,3 +69,4 @@
obj-$(CONFIG_SIFIVE_GPIO) += sifive-gpio.o
obj-$(CONFIG_NOMADIK_GPIO) += nmk_gpio.o
obj-$(CONFIG_MAX7320_GPIO) += max7320_gpio.o
+obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN) += zynqmp_gpio_modepin.o
diff --git a/drivers/gpio/zynqmp_gpio_modepin.c b/drivers/gpio/zynqmp_gpio_modepin.c
new file mode 100644
index 0000000..078fd83
--- /dev/null
+++ b/drivers/gpio/zynqmp_gpio_modepin.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ZynqMP GPIO modepin driver
+ *
+ * Copyright (C) 2021 Xilinx, Inc.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <dm.h>
+#include <asm/arch/hardware.h>
+#include <zynqmp_firmware.h>
+
+#define OUTEN(pin) (BIT(0) << (pin))
+#define INVAL(pin) (BIT(4) << (pin))
+#define OUTVAL(pin) (BIT(8) << (pin))
+
+#define ZYNQMP_CRL_APB_BOOTPIN_CTRL_MASK 0xF0F
+#define ZYNQMP_CRL_APB_BOOT_PIN_CTRL (ZYNQMP_CRL_APB_BASEADDR + \
+ (0x250U))
+
+static int get_gpio_modepin(u32 *ret_payload)
+{
+ return xilinx_pm_request(PM_MMIO_READ, ZYNQMP_CRL_APB_BOOT_PIN_CTRL,
+ 0, 0, 0, ret_payload);
+}
+
+static int set_gpio_modepin(int val)
+{
+ return xilinx_pm_request(PM_MMIO_WRITE, ZYNQMP_CRL_APB_BOOT_PIN_CTRL,
+ ZYNQMP_CRL_APB_BOOTPIN_CTRL_MASK,
+ val, 0, NULL);
+}
+
+static int modepin_gpio_direction_input(struct udevice *dev,
+ unsigned int offset)
+{
+ return 0;
+}
+
+static int modepin_gpio_set_value(struct udevice *dev, unsigned int offset,
+ int value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ u32 out_val = 0;
+ int ret;
+
+ ret = get_gpio_modepin(ret_payload);
+ if (value)
+ out_val = OUTVAL(offset) | ret_payload[1];
+ else
+ out_val = ~OUTVAL(offset) & ret_payload[1];
+
+ return set_gpio_modepin(out_val);
+}
+
+static int modepin_gpio_direction_output(struct udevice *dev,
+ unsigned int offset, int value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ u32 out_en = 0;
+ int ret;
+
+ ret = get_gpio_modepin(ret_payload);
+ if (ret)
+ return ret;
+
+ if (value)
+ out_en = OUTEN(offset) | ret_payload[1];
+ else
+ out_en = ~OUTEN(offset) & ret_payload[1];
+
+ ret = set_gpio_modepin(out_en);
+ if (ret)
+ return ret;
+
+ return modepin_gpio_set_value(dev, offset, value);
+}
+
+static int modepin_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
+ struct ofnode_phandle_args *args)
+{
+ desc->offset = args->args[0];
+
+ return 0;
+}
+
+static int modepin_gpio_get_value(struct udevice *dev, unsigned int offset)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = get_gpio_modepin(ret_payload);
+ if (ret)
+ return ret;
+
+ return (INVAL(offset) & ret_payload[1]) ? 1 : 0;
+}
+
+static int modepin_gpio_get_function(struct udevice *dev, unsigned int offset)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = get_gpio_modepin(ret_payload);
+ if (ret)
+ return ret;
+
+ return (OUTEN(offset) & ret_payload[1]) ? GPIOF_OUTPUT : GPIOF_INPUT;
+}
+
+static const struct dm_gpio_ops modepin_gpio_ops = {
+ .direction_input = modepin_gpio_direction_input,
+ .direction_output = modepin_gpio_direction_output,
+ .get_value = modepin_gpio_get_value,
+ .set_value = modepin_gpio_set_value,
+ .get_function = modepin_gpio_get_function,
+ .xlate = modepin_gpio_xlate,
+};
+
+static int modepin_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ const void *label_ptr;
+
+ label_ptr = dev_read_prop(dev, "label", NULL);
+ if (label_ptr) {
+ uc_priv->bank_name = strdup(label_ptr);
+ if (!uc_priv->bank_name)
+ return -ENOMEM;
+ } else {
+ uc_priv->bank_name = dev->name;
+ }
+
+ uc_priv->gpio_count = 4;
+
+ return 0;
+}
+
+static const struct udevice_id modepin_gpio_ids[] = {
+ { .compatible = "xlnx,zynqmp-gpio-modepin",},
+ { }
+};
+
+U_BOOT_DRIVER(modepin_gpio) = {
+ .name = "modepin_gpio",
+ .id = UCLASS_GPIO,
+ .ops = &modepin_gpio_ops,
+ .of_match = modepin_gpio_ids,
+ .probe = modepin_gpio_probe,
+};