imx: imx7d-sdb: Add DM QSPI support
On iMX7D SabreSD board, the QSPI has pins conflict with EPDC (default).
To use QSPI, users have to rework the board (de-populate R388-R391, R396-R399
populate R392-R395, R299, R300). So we add new DTS file and new defconfig
dedicated for QSPI.
Other changes to support the DM QSPI:
- Add QSPI node and alias spi0.
- Modify spi4 (spi-gpio) node and add alias spi5 for it to avoid req
conflict
- Add EPDC node in imx7d.dtsi and disable it in imx7d-sdb-qspi.dts to
align with kernel and also present the conflict.
- Add -u-boot.dtsi to modify compatible string of mx25l51245g@0 to
"spi-flash"
- Remove iomux settings of qspi in board codes which is not needed
for DM driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ebfa227..68e5c4f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -445,7 +445,8 @@
dtb-$(CONFIG_MX6ULL) += imx6ull-14x14-evk.dtb
dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
- imx7d-sdb.dtb
+ imx7d-sdb.dtb \
+ imx7d-sdb-qspi.dtb
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
diff --git a/arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi b/arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi
new file mode 100644
index 0000000..2ce6961
--- /dev/null
+++ b/arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi1 {
+ flash0: mx25l51245g@0 {
+ compatible = "spi-flash";
+ };
+};
diff --git a/arch/arm/dts/imx7d-sdb-qspi.dts b/arch/arm/dts/imx7d-sdb-qspi.dts
new file mode 100644
index 0000000..9bb4c74
--- /dev/null
+++ b/arch/arm/dts/imx7d-sdb-qspi.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+#include "imx7d-sdb.dts"
+
+/* disable epdc, conflict with qspi */
+&epdc {
+ status = "disabled";
+};
+
+&iomuxc {
+ qspi1 {
+ pinctrl_qspi1_1: qspi1grp_1 {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x51
+ MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x51
+ MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x51
+ MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x51
+ MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x51
+ MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x51
+ >;
+ };
+ };
+};
+
+&qspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi1_1>;
+ status = "okay";
+ ddrsmp=<0>;
+
+ flash0: mx25l51245g@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "macronix,mx25l51245g";
+ spi-max-frequency = <29000000>;
+ /* take off one dummy cycle */
+ spi-nor,ddr-quad-read-dummy = <5>;
+ reg = <0>;
+ };
+};
diff --git a/arch/arm/dts/imx7d-sdb.dts b/arch/arm/dts/imx7d-sdb.dts
index bafcc79..76aa69a 100644
--- a/arch/arm/dts/imx7d-sdb.dts
+++ b/arch/arm/dts/imx7d-sdb.dts
@@ -11,11 +11,15 @@
model = "Freescale i.MX7 SabreSD Board";
compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+ aliases {
+ spi5 = &soft_spi;
+ };
+
memory {
reg = <0x80000000 0x80000000>;
};
- spi4 {
+ soft_spi: soft-spi {
compatible = "spi-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
diff --git a/arch/arm/dts/imx7d.dtsi b/arch/arm/dts/imx7d.dtsi
index f6dee41..30b0589 100644
--- a/arch/arm/dts/imx7d.dtsi
+++ b/arch/arm/dts/imx7d.dtsi
@@ -86,6 +86,18 @@
};
};
+&aips2 {
+ epdc: epdc@306f0000 {
+ compatible = "fsl,imx7d-epdc";
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x306f0000 0x10000>;
+ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_EPDC_PIXEL_ROOT_CLK>;
+ clock-names = "epdc_axi", "epdc_pix";
+ epdc-ram = <&gpr 0x4 30>;
+ status = "disabled";
+ };
+};
+
&aips3 {
usbotg2: usb@30b20000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
diff --git a/arch/arm/dts/imx7s.dtsi b/arch/arm/dts/imx7s.dtsi
index 4d42335..5067b9f 100644
--- a/arch/arm/dts/imx7s.dtsi
+++ b/arch/arm/dts/imx7s.dtsi
@@ -82,10 +82,11 @@
serial4 = &uart5;
serial5 = &uart6;
serial6 = &uart7;
- spi0 = &ecspi1;
- spi1 = &ecspi2;
- spi2 = &ecspi3;
- spi3 = &ecspi4;
+ spi0 = &qspi1;
+ spi1 = &ecspi1;
+ spi2 = &ecspi2;
+ spi3 = &ecspi3;
+ spi4 = &ecspi4;
};
cpus {
@@ -1072,6 +1073,19 @@
status = "disabled";
};
+ qspi1: qspi@30bb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-qspi";
+ reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
+ <&clks IMX7D_QSPI_ROOT_CLK>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
sdma: sdma@30bd0000 {
compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
reg = <0x30bd0000 0x10000>;
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index 90e2d1a..191b59a 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -36,9 +36,6 @@
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
PAD_CTL_DSE_3P3V_49OHM)
-#define QSPI_PAD_CTRL \
- (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
-
#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
#define SPI_PAD_CTRL \
@@ -278,21 +275,8 @@
#endif
#ifdef CONFIG_FSL_QSPI
-static iomux_v3_cfg_t const quadspi_pads[] = {
- MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
- MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
- MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
- MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
- MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL),
- MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL),
-};
-
int board_qspi_init(void)
{
- /* Set the iomux */
- imx_iomux_v3_setup_multiple_pads(quadspi_pads,
- ARRAY_SIZE(quadspi_pads));
-
/* Set the clock */
set_clk_qspi();
diff --git a/configs/mx7dsabresd_qspi_defconfig b/configs/mx7dsabresd_qspi_defconfig
new file mode 100644
index 0000000..a798804
--- /dev/null
+++ b/configs/mx7dsabresd_qspi_defconfig
@@ -0,0 +1,83 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_TARGET_MX7DSABRESD=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
+# CONFIG_ARMV7_VIRT is not set
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+# CONFIG_CMD_BMODE is not set
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb-qspi"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_74X164=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_FSL_ESDHC=y
+CONFIG_FSL_QSPI=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SOFT_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_VIDEO=y
+CONFIG_ERRNO_STR=y
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 11fcc9f..87241ef 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -225,9 +225,7 @@
#endif
#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SYS_FSL_QSPI_AHB
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 40000000